The UniFi AC Pro AP supports simultaneous dual-band, 3×3 MIMO technology in the 5 and 2.4 GHz radio bands.
The newly redesigned UniFi Controller optimizes RF performance.
The UniFi AC Pro AP is a gigabit, 802.3af-powered access point suitable for indoor or outdoor use.
With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller.
Remotely access the UniFi Controller to upgrade deployed UniFi APs while in the field.
Dimensions : 196.7 x 196.7 x 35 mm
Weight : 350 g
Networking Interface : (2) 10/100/1000 Ethernet Ports
Buttons : Reset
Wi-Fi Standards : 802.11 a/b/g/n/ac
Power Method Passive : Power over Ethernet (48V), 802.3af Supported
Power Supply : 48V, 0.5A PoE Adapter (Not included)
Maximum Power : Consumption 20 W
BSSID : Up to Four Per Radio
Power : Save Supported
Wireless Security : WEP, WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i
Certifications : CE, FCC, IC
Mounting : Wall/Ceiling (Kits Included)
Operating Temperature : -10°C to 70°C
Operating Humidity : 5 – 95% Non-condensing
Antennas : 3 Integrated Dual-Band (Supports 3×3 MIMO with Spatial Diversity)
Max. TX Power : 22dBm @ 2.4 GHz 22dBm @ 5 GHz
VLAN : 802.1Q
Advanced QoS : WLAN prioritization
Guest Traffic Isolation : Supported
WMM : Voice, video, best effort, and background
Concurrent Clients : 200+
802.11a : 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n : MCS0 – MCS23 (6.5 Mbps do 450 Mbps), HT 20/40
802.11ac : MCS0 – MCS9 (6.5 Mbps do 1300 Mbps), VHT 20/40/80
802.11b : 1, 2, 5.5, 11
802.11g : 6, 9, 12, 18, 24, 36, 48, 54
