UDB-Pro Device Bridge Pro
Features:
Note: Cannot be set up standalone and must be managed by a UniFi Console, Official UniFi Hosting, or a Self-Hosted UniFi Network Server.
*PoE adapter included. PoE+ input required for PoE passthrough.
Dimensions : Ø189.5 x 64.3 mm
Weight : Without mount: 431 g With mount: 515 g
Enclosure material : UV-resistant polycarbonate
Mount material : UV-stabilized polycarbonate, stainless steel
Pole mount diameter : 20–53.1 mm on pipe outer diameter
Wind loading : 69 N at 200 km/h
Weatherproofing : IPX6
Networking interface : (2) GbE RJ45 ports
Management interface : Ethernet WiFi
PoE interface : (1) PoE in (PoE output not used) (1) Passive PoE output
Power method : PoE PoE+ (Required for PoE output)
Power supply : UniFi PoE switch 48V, 0.32A PoE adapter (Included)
Supported volatage range : 42.5–57V DC
Max. power consumption : 9W
Max. TX power @ 5 GHz : 25 dBm
Max. data rate @5 GHz : 867 Mbps (BW80)
MIMO @ 5 GHz : 2 x 2
Antenna gain @ 5 GHz : 19 dBi
Antenna : Internal
Range : 5+ km
LEDs : Power, Ethernet, (4) signal strength
Button : Factory reset
Mounting : Pole (Included)
Ambient operating temperature : -40°C to 60°C
Ambient operating humidity : 5 to 95% noncondensing
Certifications : CE, FCC, IC
WiFi standards : 802.11a/n/ac
Wireless security : WPA2 AES (Always On)
Operating frequency : 5150 – 5875 MHz (Depends on regulatory region)
Channel bandwidth : 20/40/80 MHz
Max. conducted TX power : 25 dBm (Combined)
Modulation : BPSK (½), QPSK (½), QPSK (¾), 16QAM (½), 16QAM (¾) 64QAM (2⁄3), 64QAM (¾), 64QAM (5⁄6), 256QAM (¾), 256QAM (5⁄6)
