https://www.aerial.net/shop/product/176_177/1998/mikrotik-mikrotik-rb960pgspb-powerbox-pro.html MikroTik RB960PGS-PB, PowerBox Pro MikroTik > Ethernet routers 82.39 RB960PGS-PB 4752224003317 3 https://www.aerial.net/shop/imageslarge/RB960PGS-PB_1.jpg PowerB​ox Pro The PowerBox Pro is an outdoor five gigabit ethernet port router with PoE output on four ports. Since the device has a waterproof outdoor case, you can mount it on a tower, or in other outdoor locations. It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power 802.3at and af mode B compatible devices, if 48-57 input voltage is used. It is affordable, small and easy to use, but at the same time comes with a very powerful 800MHz CPU, capable of all the advanced configurations that RouterOS supports. https://www.aerial.net/shop/imageslarge/RB960PGS-PB_2.jpg https://www.aerial.net/shop/imageslarge/RB960PGS-PB_3.jpg https://www.aerial.net/shop/imageslarge/RB960PGS-PB_4.jpg https://www.aerial.net/shop/imageslarge/RB960PGS-PB_5.jpg Product code RB960PGS-PB Architecture MIPSBE CPU QCA9557 CPU core count 1 CPU nominal frequency 800 MHz Switch chip model QCA8337 Dimensions 125 x 52 x 225 mm RouterOS license 4 Operating System RouterOS Size of RAM 128 MB Storage size 16 MB Storage type FLASH MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -40°C to 70°C Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 12-57 V Max power consumption 54 W Max power consumption without attachments 6 W Cooling type Passive PoE in Passive PoE PoE in input Voltage 12-57 V PoE-out ports Ether2-Ether5 PoE out 802.3af/at Max out per port output (input 18-30 V) 1 A Max out per port output (input 30-57 V) 450 mA Max total out (A) 2 A 10/100/1000 Ethernet ports 5 SFP ports 1 PCB temperature monitor Yes Voltage Monitor Yes Certification CE, EAC, ROHS https://www.aerial.net/shop/product/176_177/3280/mikrotik-mikrotik-e50ug-hex-refresh.html MikroTik E50UG, hEX refresh (2024) MikroTik > Ethernet routers 44.89 E50UG 4752224009616 2 https://www.aerial.net/shop/imageslarge/E50UG_1.jpg hEX refresh hEX is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a full size USB port. This new updated revision of the hEX brings several improvements in performance. It is affordable, small and easy to use, but at the same time comes with a very powerful dual core 950 MHz ARM Dual Core CPU and 512MB RAM, capable of all the advanced configurations that RouterOS supports. IPsec hardware encryption (~470 Mbps) and The Dude server package is supported, microSD slot on it provides improved r/w speed for file storage and Dude. https://www.aerial.net/shop/imageslarge/E50UG_2.jpg https://www.aerial.net/shop/imageslarge/E50UG_3.jpg https://www.aerial.net/shop/imageslarge/E50UG_4.jpg Product code E50UG Architecture ARM CPU EN7562CT CPU core count 2 CPU nominal frequency 950 MHz Switch chip model EN7562CT Dimensions 113x89x28mm RouterOS license 4 Operating System RouterOS v7 Size of RAM 512 MB Storage size 128 MB Storage type NAND MTBF (Approximately) 100.000 hours @ 25°C Tested ambient temperature -40°C to +70°C Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 12-28 V Max power consumption 10 W Max power consumption without attachments 4 W Cooling type Passive PoE in Passive PoE PoE in input Voltage 12-28 V 10/100/1000 Ethernet ports 5 Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 CPU temperature monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Mode button Yes Certification CE, EAC, ROHS IP 20 https://www.aerial.net/shop/product/176_177/3376/mikrotik-mikrotik-rds22162xg4s4xs2xq-rose-data.html MikroTik RDS2216-2XG-4S+4XS-2XQ, ROSE Data server (RDS) MikroTik > Ethernet routers 1460.67 RDS2216-2XG-4S+4XS-2XQ 4752224009340 0 https://www.aerial.net/shop/imageslarge/rds2216_1.jpg RDS2216 - RDS2216-2XG-4S+4XS-2XQ ROSE Data server (RDS) RDS is a high-performance, all-in-one storage, 100G networking, and container platform designed for enterprise environments. Featuring 20 U.2 NVMe storage slots and a special RouterOS Edition for Storage & Compute (ROSE). Features: https://www.aerial.net/shop/imageslarge/rds2216_2.jpg https://www.aerial.net/shop/imageslarge/rds2216_3.jpg https://www.aerial.net/shop/imageslarge/rds2216_4.jpg https://www.aerial.net/shop/imageslarge/rds2216_5.jpg Product code RDS2216-2XG-4S+4XS-2XQ Architecture ARM 64bit CPU AL73400 CPU core count 16 CPU nominal frequency 2000 MHz Switch chip model 98DX4310 RouterOS license 6 Operating System RouterOS v7 (Special ROSE edition) Size of RAM 32 GB Storage size 128 MB Storage type NAND MTBF Approximately 200.000 hours at 25°C Tested ambient temperature -20°C to 50°C IPsec hardware acceleration Yes Number of AC inputs 2 AC input range 100-240 Frequency (Hz) 50-60 Max power consumption 286 W Max power consumption without attachments 105 W Cooling type 10 fans 10/100/1000 Ethernet ports 1 Number of 1G/2.5G/5G/10G Ethernet ports 2 SFP+ ports 4 Number of 25G SFP28 ports 4 Number of 100G QSFP28 ports 2 Serial console port RJ45 Number of USB ports 2 USB Power Reset Yes USB slot type USB 3.0 type A Max USB current (A) 1 Number of M.2 slots 2 https://www.aerial.net/shop/product/176_177/1620/mikrotik-mikrotik-rb750ppbr2-powerbox.html MikroTik RB750P-PBr2, PowerBox MikroTik > Ethernet routers 51.36 RB750P-PBr2 4752224000354 5 https://www.aerial.net/shop/imageslarge/MT-PowerBox_main.jpg PowerB​ox The PowerBOX is an outdoor five Ethernet port router with PoE output on four ports. You can use this device to supply power to four PoE capable devices such as our SXT or others. Since the device has a waterproof outdoor case, you can mount it on a tower, or in other outdoor locations. The unit has five shielded Ethernet ports, four of which can power other PoE capable devices with the same voltage as applied to the unit (max current out is 1A per port, max total out is 2A). Less power adapters and cables to worry about! https://www.aerial.net/shop/imageslarge/MT-RB750P-PBr2_front.jpg https://www.aerial.net/shop/product/176_177/1921/mikrotik-mikrotik-rb750gr3-hex.html MikroTik RB750Gr3, hEX MikroTik > Ethernet routers 44.89 RB750Gr3 4752224002761 0 https://www.aerial.net/shop/imageslarge/MT-RB750Gr3_main.jpg hEX hEX is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a full size USB port. This new updated revision of the hEX brings several improvements in performance. It is affordable, small and easy to use, but at the same time comes with a very powerful dual core 880MHz CPU and 256MB RAM, capable of all the advanced configurations that RouterOS supports. IPsec hardware encryption (~470 Mbps) and The Dude server package is supported, microSD slot on it provides improved r/w speed for file storage and Dude. https://www.aerial.net/shop/imageslarge/MT-RB750Gr3_front.jpg https://www.aerial.net/shop/imageslarge/MT-RB750Gr3_bottom.jpg https://www.aerial.net/shop/imageslarge/MT-RB750Gr3_included.jpg Product code RB750Gr3 Architecture MMIPS CPU MT7621A CPU core count 2 CPU nominal frequency 880 MHz CPU Threads count 4 Switch chip model MT7621A Dimensions 113x89x28mm RouterOS license 4 Operating System RouterOS Size of RAM 256 MB Storage size 16 MB Storage type FLASH MTBF Approximately 100.000 hours at 25°C Tested ambient temperature -40°C to 60°C IPsec hardware acceleration Yes Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 8-30 V Max power consumption 10 W Max power consumption without attachments 5 W Cooling type Passive PoE in Passive PoE PoE in input Voltage 8-30 V 10/100/1000 Ethernet ports 5 Memory card type microSD Memory Cards 1 Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 PCB temperature monitor Yes Voltage Monitor Yes Mode button Yes Beeper Yes Certification CE, EAC, ROHS IP IP20 https://www.aerial.net/shop/product/176_177/2022/mikrotik-mikrotik-rb960pgs-hex-poe.html MikroTik RB960PGS, hEX PoE MikroTik > Ethernet routers 67.42 RB960PGS 4752224003294 5 https://www.aerial.net/shop/imageslarge/MT-RB960PGS_main.jpg hEX PoE hEX PoE is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a USB 2.0 port and a SFP port for adding optical fiber connectivity. The ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Max current is 1A per port, Ethernet ports are shielded. It also supports passive or standard 802.3af/at PoE input/output. https://www.aerial.net/shop/imageslarge/MT-RB960PGS_front.jpg https://www.aerial.net/shop/imageslarge/MT-RB960PGS_top.jpg https://www.aerial.net/shop/imageslarge/MT-RB960PGS_bottom.jpg https://www.aerial.net/shop/imageslarge/MT-RB960PGS_contents.jpg Product code RB960PGS Ethernet ports 5 x 10/100/1000 CPU QCA9557 CPU core count 1 CPU nominal frequency 800 MHz License level 4 Max Power consumption 9W Number of USB ports 1 PCB temperature monitor Yes PoE in Passive PoE PoE out 802.3af/at Power Jack 1 SFP ports 1 Size of RAM 128 MB Storage size 16 MB Storage type FLASH Supported input voltage 12 V - 57 V Tested ambient temperature -40°C to 70°C USB Power Reset Yes USB slot type USB type A Voltage Monitor Yes https://www.aerial.net/shop/product/176_177/3036/mikrotik-mikrotik-routerboard-l009uigsrm.html MikroTik RouterBOARD L009UiGS-RM MikroTik > Ethernet routers 88.81 L009UiGS-RM 4752224008589 0 https://www.aerial.net/shop/imageslarge/L009UiGS-RM_main.jpg L009UiGS-RM - L009 is more than just a router. This product line is up to 4 times faster than RB2011, it has a modern ARM CPU with container support, an innovative enclosure that allows mounting up to four routers in a single 1U space, more RAM, PoE, and 2.5G SFP support. This version comes with 1U rackmount accessories. L009 is an upgraded version of the famous RB2011 router. The L009 model is up to 4 times faster than RB2011 in most cases and setups, from simple fast path routing to complex bridge filters. Router L009UiGS-RM has better performance, more features, and some interesting quality-of-life improvements. A powerful dual-core ARM CPU offers significant improvement when it comes to routing and filtering, complex firewall rules, IPsec hardware encryption, and various advanced RouterOS features. The router is equipped with 8 Gigabit Ethernet ports with PoE-in on the first port (it can be used to power the unit instead of the DC jack) and the PoE-out on the last port (works only if the router is powered by DC jack). An SFP cage that supports both Gigabit and 2.5 Gigabit connectivity. There is also a console port for quick direct-access configuration. A speedy Marvell Peridot Switch chip offers an impressive 2.5 Gigabit full duplex connection to the CPU to all the ports except Ether1. The first port has its own Gigabit full duplex line to the CPU. The enclosure of the router acts as a massive heat-sink, protecting your setups from overheating. Up to four of these routers can be installed in a single 1U rackmount space. https://www.aerial.net/shop/imageslarge/L009UiGS-RM_3d.jpg https://www.aerial.net/shop/imageslarge/L009UiGS-RM_side.jpg https://www.aerial.net/shop/imageslarge/L009UiGS-RM_rear.jpg https://www.aerial.net/shop/imageslarge/L009UiGS-RM_contents.jpg Product code L009UiGS-RM Architecture ARM 64bit CPU IPQ-5018 CPU core count 2 CPU nominal frequency 800 MHz Switch chip model 88E6190 RouterOS license 5 Operating System RouterOS v7 Size of RAM 512 MB Storage size 128 MB Storage type NAND MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -40°C to 70°C Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 24-56 V Max power consumption 37 W Max power consumption without attachments 8 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 24-56 V PoE-out ports Ether8 PoE out Passive PoE Max out per port output (input 18-30 V) 1 A Max out per port output (input 30-57 V) 450 mA Max total out (A) 1 A 10/100/1000 Ethernet ports 8 Number of 1G Ethernet ports with PoE-out 1 SFP ports 1 (2.5G supported) Serial console port RJ45 Number of USB ports 1 USB Power Reset Yes USB slot type USB 3.0 type A Max USB current (A) 1 https://www.aerial.net/shop/product/176_177/1690/mikrotik-mikrotik-rb750upr2-hex-poe.html MikroTik RB750UPr2, hEX PoE lite MikroTik > Ethernet routers 44.89 RB750UPr2 4752224000385 3 https://www.aerial.net/shop/imageslarge/MT-RB750UPr2_main.jpg hEX PoE lite The RB750UPr2 (hEX PoE lite) is a small five port ethernet router in a plastic case, it has a USB 2.0 port and PoE output. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Max current is 1A per port, Ethernet ports are shielded. It is affordable, small and easy to use. With it’s compact design and clean looks, it will fit perfectly into any SOHO environment. Box contains: RB750UPr2 in a plastic case, power supply https://www.aerial.net/shop/imageslarge/MT-RB750UPr2_front.jpg https://www.aerial.net/shop/imageslarge/MT-RB750UPr2_included.jpg Product code RB750UPr2 Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Dimensions 113 x 89 x 28 mm License level 4 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C PoE in Passive PoE PoE out Passive PoE PoE in input Voltage 8-30 V Number of DC inputs 2 (PoE-IN, DC jack) DC jack input Voltage 8-30 V Max out per port output (input < 30 V) 1 A Max total out (A) 2 A Max power consumption 3 W Max power consumption without attachments 3W 10/100 Ethernet ports 5 Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 Current Monitor Yes PCB temperature monitor Yes Voltage Monitor Yes https://www.aerial.net/shop/product/176_177/2020/mikrotik-mikrotik-rb1100ahx4-dude-edition.html MikroTik RB1100AHx4 Dude Edition MikroTik > Ethernet routers 294.27 RB1100Dx4 4752224002648 0 https://www.aerial.net/shop/imageslarge/MT-RB1100AHx4_main.jpg RB1100AHx4 Dude Edition The new RB1100AHx4 Dude Edition has Annapurna Alpine AL21400 CPU with four Cortex A15 cores clocked at 1.4GHz each, for a maximum throughput of up to 7.5Gbps. The device supports IPsec hardware acceleration and is faster at it than any previous RouterBOARD device (up to 2.2Gbps with AES128). Unit comes with 1U rackmount case, 13x Gigabit Ethernet ports, RS232 serial port and dual redundant power supplies (with -48v DC telecom power and 802.3at/af support). The RB1100AHx4 Dude edition features several high speed storage connectors (two SATA and two M.2) for using a Dude database, proxy cache or any other storage intensive feature. It includes a 60GB M.2 drive already installed. https://www.aerial.net/shop/imageslarge/MT-RB1100AHx4_rear.jpg https://www.aerial.net/shop/imageslarge/MT-RB1100AHx4_pcb.jpg https://www.aerial.net/shop/imageslarge/MT-RB1100AHx4_contents.jpg Product code RB1100Dx4 10/100/1000 Ethernet ports 13 CPU AL21400-1400-A0-E-1AN-8-C CPU Threads count 4 CPU core count 4 CPU nominal frequency 1.4 GHz Current Monitor Yes Dimensions 444 x 148 x 47 mm Extended storage 60GB M.2 SSD included License level 6 M.2 slots 2 Max Power consumption 25W Operating System RouterOS PCB temperature monitor Yes PoE in 802.3af/at Power Jack 2 SATA ports 2x SATA3 Serial port RS232 Size of RAM 1 GB Storage size 128 MB Storage type NAND Supported input voltage 20 V - 57 V Voltage Monitor Yes https://www.aerial.net/shop/product/176_177/2782/mikrotik-mikrotik-ccr211612g4s.html MikroTik CCR2116-12G-4S+ MikroTik > Ethernet routers 743.71 CCR2116-12G-4S+ 4752224007919 0 https://www.aerial.net/shop/imageslarge/MT-CCR2116-12G-4S+_main.jpg CCR2116-12G-4S+ Forget about CPU limitations in 10G setups with this powerful 16-core ARM CPU based CCR. Double the performance of our previous 36- core CCR, 6x faster BGP performance. Includes an M.2 PCIe slot. We wanted to see the full potential of the good, old, reliable 10G networking combined with a modern CPU. CCR2116-12G-4S+ allows you to forget about CPU limitations in your setup. Like its younger brother – the amazing CCR2004, this router features the mighty Amazon Annapurna Labs Alpine CPU. But with 16 cores running at 2 GHz, this CCR eats the other one for breakfast. For example, we see at least a 15% increase in single-core performance. And that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues, for example. CCR2116-12G-4S+ sets a new standard of single-core performance in the whole CCR product family! And it supports Layer 3 Hardware Offloading! Obviously, you need the right connectivity to harness this power. There are four 10G SFP+ ports. They have a separate, full-duplex line connected to the Marvell Aldrin family switch chip. Then we have Gigabit Ethernet ports. 12 of them are running through the Marvel chip. And there is another Gigabit port connected directly to the CPU. For management purposes. Each group of 4 ports has a separate full-duplex connection to the switch chip. No bottlenecks here. You can expect switch-like throughput in most setups. The new generation of processors offers mind-blowing performance. If we look at the CCR1036 - the powerhouse with a 36 core CPU, the new CCR2116 can easily double the performance. 16 cores vs 36 cores. Double the performance. Or even more. If you are a rather large ISP, dealing with dynamic routing, massive BGPs, complex firewall rules, and intricate quality of service configurations..This is the right device for you. Combination of raw power and utility with the reliable 10G networking. And yes, like with any ISP-level device, we’ve included a dual-redundant power supply. So you have one less thing to worry about. CCR2116-12G-4S+: technology tested by time, built for the future. 13 10/100/1000 Ethernet ports https://www.aerial.net/shop/product/176_177/2781/mikrotik-mikrotik-rb5009ugsin.html MikroTik RB5009UG+S+IN MikroTik > Ethernet routers 163.73 RB5009UG+S+IN 4752224007148 0 https://www.aerial.net/shop/imageslarge/MT-RB5009UG+S+IN_main.jpg RB5009UG+S+IN The ultimate heavy-duty home lab router with USB 3.0, 1G and 2.5G Ethernet and a 10G SFP+ cage. You can mount four of these new routers in a single 1U rackmount space! Unprecedented processing power in such a small form factor. Double the usual performance: we took your feedback from the MikroTik User Meetings to create the perfect home lab router: compact, powerful, with multiple powering options and efficient cooling.RB5009 has it all, and even more! The board features 9 wired ports and a full-sized USB 3.0. Seven of the ports are Gigabit Ethernet, another one is 2.5 Gigabit Ethernet, and the last one is a 10G SFP+ cage. All the ports are connected to a powerful Marvell Amethyst family switch-chip with a 10 Gbps full-duplex line leading to the Marvell Armada Quad-core ARMv8 1.4 GHz CPU. Both CPU and the switch-chip are located on the bottom of the board – so the case acts as a massive heat-sink! Units come with 1GB of DDR4 RAM and 1GB NAND storage. This combination of ports and components, compared to our other products in a similar form factor, provides almost double the performance in configurations with heavy CPU loads. With a simple set of mounting accessories, you can mount FOUR of these routers in a single 1U rackmount space! No more server-room-Tetris, just pure productivity. https://www.aerial.net/shop/product/176_177/2763/mikrotik-mikrotik-ccr200416g2s.html MikroTik CCR2004-16G-2S+ MikroTik > Ethernet routers 347.78 CCR2004-16G-2S+ 4752224007704 0 https://www.aerial.net/shop/imageslarge/ccr2004_16g_2s_main.jpg CCR2004-16G-2S+ : This powerful and affordable router crushes all previous CCR models in single-core performance. 16x Gigabit Ethernet ports, 2x10G SFP+ cages, active cooling and the best single-core performance per watt & best overall performance per watt among all the CCR devices. Like the other models in CCR2004 series, this CCR also features the Annapurna Labs Alpine v2 CPU with 4x 64-bit ARMv8-A Cortex-A57 cores running at 1,7GHz. But here’s the difference. This powerful router crushes all previous CCR models in single-core performance, and that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues, for example.But that’s not all! It also has the best single-core performance per watt and best overall performance per watt among all the CCR devices. Better for the planet, better for the bills, it’s a win-win! The new router has 18 wired ports, including 16x Gigabit Ethernet ports and two 10G SFP+ cages. It also has a full-size USB and RJ-45 console port on the front panel. Like all CCR devices, it comes in a classic white 1U rackmount case. Built-in dual redundant power supplies are included, so you have one less thing to worry about. And, of course, there is active cooling to keep things nice and cool. Each group of 8 Gigabit Ethernet ports is connected to a separate Marvell Amethyst family switch-chip. Each switch chip has a 10 Gbps full-duplex line connected to the CPU. The same goes for each SFP+ cage - a separate 10 Gbps full-duplex line. Boards come with 4GB of DDR4 RAM and 128MB of NAND storage. https://www.aerial.net/shop/imageslarge/ccr2004_16g_2s_rear.jpg https://www.aerial.net/shop/imageslarge/ccr2004_16g_2s_3d.jpg https://www.aerial.net/shop/imageslarge/ccr2004_16g_2s_contents.jpg Product code CCR2004-16G-2S+ Architecture ARM 64bit CPU AL32400 CPU core count 4 CPU nominal frequency 1700 MHz RouterOS license 6 Operating System RouterOS (v7 only) Size of RAM 4 GB Storage size 128 MB Storage type NAND MTBF Approx 200'000 hours at 25°C Tested ambient temperature -20°C to 60°C IPsec hardware acceleration Yes Number of AC inputs 2 AC input range 100-240 Frequency (Hz) 50/60 Max power consumption 48 W Max power consumption without attachments 35 W FAN count 2 10/100/1000 Ethernet ports 16 SFP+ ports 2 Serial console port RJ45 Number of USB ports 1 USB Power Reset Yes USB slot type USB 3.0 type A Max USB current (A) 0.9 CPU temperature monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Certification CE, EAC, ROHS IP IP20 https://www.aerial.net/shop/product/176_177/2067/mikrotik-mikrotik-rb1100ahx4.html MikroTik RB1100AHx4 MikroTik > Ethernet routers 230.07 RB1100x4 4752224002662 0 https://www.aerial.net/shop/imageslarge/MT-RB1100x4_main.jpg RB1100AHx4 Introducing RB1100AHx4, 13x Gigabit Ethernet ports Router, powered by Annapurna Alpine AL21400 CPU with four Cortex A15 cores, clocked at 1.4GHz each, for a maximum throughput of up to 7.5Gbit. The device supports IPsec hardware acceleration (up to 2.2Gbps with AES128). Unit comes with 1U rackmount case, RS232 serial port and dual redundant power supplies (with -48v DC telecom power and 802.3at/af support). https://www.aerial.net/shop/imageslarge/MT-RB1100x4_rear.jpg https://www.aerial.net/shop/imageslarge/MT-RB1100x4_pcb.jpg https://www.aerial.net/shop/imageslarge/MT-RB1100x4_contents.jpg Product code RB1100x4 Architecture ARM 32bit CPU AL21400-1400-A0-E-1AN-8-C CPU core count 4 CPU nominal frequency 1.4 GHz Dimensions 444 x 148 x 47 mm License level 6 Operating System RouterOS Size of RAM 1 GB Storage size 128 MB Storage type NAND Max Power consumption 20W Number of DC inputs 2 (PoE-IN, 2-pin terminal) PoE in 802.3af/at PoE in input Voltage 20-57 V 2-pin terminal input Voltage -48, 12-57 V Number of AC inputs 2 AC input range 100-240 V 10/100/1000 Ethernet ports 13 Serial port RS232 Current Monitor Yes PCB temperature monitor Yes Voltage Monitor Yes https://www.aerial.net/shop/product/176_177/2181/mikrotik-mikrotik-rb4011igsrm.html MikroTik RB4011iGS+RM MikroTik > Ethernet routers 163.73 RB4011iGS+RM 4752224002730 2 https://www.aerial.net/shop/imageslarge/MT-RB4011iGS+RM_main.jpg RB4011 series Amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration for a great price! The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit. The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black. RB4011iGS+RM includes two rackmount ears that will securely fasten the unit in a standard 1U rack space. https://www.aerial.net/shop/imageslarge/MT-RB4011iGS+RM_earsFront.jpg https://www.aerial.net/shop/imageslarge/MT-RB4011iGS+RM_earsRear.jpg https://www.aerial.net/shop/imageslarge/MT-RB4011iGS+RM_ears.jpg https://www.aerial.net/shop/imageslarge/MT-RB4011iGS+RM_bottom.jpg Architecture ARM 32bit CPU AL21400 CPU core count 4 CPU nominal frequency 1.4 GHz Dimensions 228 x 120 x 30 mm License level 5 Operating System RouterOS Size of RAM 1 GB Storage size 512 MB Storage type NAND Tested ambient temperature -40°C .. +70°C PoE in Passive PoE PoE out Passive PoE up to 57V PoE in input Voltage 18-57 V Number of DC inputs 2 (PoE-IN, DC jack) Max out per port output (input > 30 V) 420 mA Max out per port output (input < 30 V) 600 mA Max total out (A) 600 mA Max power consumption 47W Max power consumption without attachments 19W 10/100/1000 Ethernet ports 10 SFP+ ports 1 Serial port RJ45 PCB temperature monitor Yes Voltage Monitor Yes https://www.aerial.net/shop/product/176_177/1618/mikrotik-mikrotik-rb750r2-hex-lite.html MikroTik RB750r2, hEX lite MikroTik > Ethernet routers 32.06 RB750r2 4752224000378 4 https://www.aerial.net/shop/imageslarge/MT-RB750r2_main.jpg hEX lite The RB750r2 (hEX lite) is a small five port ethernet router in a nice plastic case. Its price is lower than the RouterOS license alone - there simply is no choice when it comes to managing your wired home network, the RB750r2 (hEX lite) has it all. It’s affordable, small, good looking and easy to use. It’s probably the most affordable MPLS capable router on the market! No more compromise between price and features - RB750r2 has both. With its compact design and clean looks, it will fit perfectly into any SOHO environment. https://www.aerial.net/shop/imageslarge/MT-RB750r2_front.jpg https://www.aerial.net/shop/imageslarge/MT-RB750r2_included.jpg Product code RB750r2 Architecture MIPS-BE CPU QCA9533 CPU core count 1 CPU nominal frequency 850 MHz Product weight 129gr Dimensions 113 x 89 x 28 mm License level 4 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -20°C to +70°C Max Power consumption 2W PoE in Passive PoE PoE in input Voltage 6-30 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 6-30 V 10/100 Ethernet ports 5 https://www.aerial.net/shop/product/176_177/2390/mikrotik-mikrotik-ccr20041g12s2xs.html MikroTik CCR2004-1G-12S+2XS MikroTik > Ethernet routers 444.09 CCR2004-1G-12S+2XS 4752224000019 0 https://www.aerial.net/shop/imageslarge/MT-CCR2004-1G-12S+2XS_main.jpg CCR2004-1G-12S+2XS - The Connectivity Router - your best companion when it comes to SFP, SFP+ and SFP28 management! 1, 10 and 25 Gbps ports in a single device to make your life easier. The “Improvise. Adapt. Overcome.” mindset can be very helpful, but sometimes you simply need a device that works and solves the problem without additional tinkering. The CCR2004-1G-12S+2XS does just that – forget about all connectivity troubles and expand your setup in any way you please. This handy router features 12 x 10G SFP+ and 2 x 25G SFP28 ports. CCR2004-1G-12S+2XS is our router with the most powerful single-core performance so far. It provides incredible results in single tunnel (up to 3.4 Gbps) and BGP feed processing. Be prepared for anything: 10G, 40G and now 25G! Paired with such MikroTik multiport products as CRS317-1G-16S+RM, CRS312-4C+8XG-RM and CRS326-24S+2Q+RM, your networking setup will know no bounds. Performance-wise, CCR2004-1G-12S+2XS is on par with the renowned CCR1009/CCR1016 routers. And with dual redundant power supply you can forget about unexpected downtime! With its elaborate port configuration, the new CCR2004-1G-12S+2XS is the perfect addition to any professional networking arsenal – it will save you tons of time in some tricky situations! https://www.aerial.net/shop/imageslarge/MT-CCR2004-1G-12S+2XS_front.jpg https://www.aerial.net/shop/imageslarge/MT-CCR2004-1G-12S+2XS_rear.jpg https://www.aerial.net/shop/imageslarge/MT-CCR2004-1G-12S+2XS_contents.jpg Product code CCR2004-1G-12S+2XS Architecture ARM 64bit CPU AL32400 CPU core count 4 CPU nominal frequency 1700 MHz Dimensions 443 x 224 x 44 mm License level 6 Operating System RouterOS Size of RAM 4 GB Storage size 128 MB Storage type NAND Tested ambient temperature -20°C to 60°C Number of AC inputs 2 AC input range 100-240 Max power consumption 49 W Max power consumption without attachments 32 W 10/100/1000 Ethernet ports 1 SFP+ ports 12 Number of 25G SFP28 ports 2 Serial port RJ45 CPU temperature monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Certification CE/RED, EAC, ROHS https://www.aerial.net/shop/product/176_177/3043/mikrotik-mikrotik-routerboard-l009uigs2haxdin.html MikroTik RouterBOARD L009UiGS-2HaxD-IN MikroTik > Ethernet routers 96.31 L009UiGS-2HaxD-IN 4752224008596 0 https://www.aerial.net/shop/imageslarge/L009UiGS-2HaxD-IN_main.jpg L009UiGS-2HaxD-IN L009 4 times faster than RB2011, it has a modern ARM CPU with container support, an innovative enclosure that allows mounting up to four routers in a single 1U space, more RAM, PoE, and 2.5G SFP support. L009 features a powerful dual-core ARM CPU. It offers significant improvement when it comes to routing and filtering, complex firewall rules, IPsec hardware encryption, and various advanced RouterOS features. ARM CPU architecture provides significant advantages over older MIPS-based devices. Like using all the latest Linux Kernel features. Or implementing your own container projects. The combination of a modern ARM CPU and a full-sized USB port is perfect for running custom container projects. You could run a Pi-hole adblock on this router, for example. Or you could use the USB to add an LTE modem of your choice. Imagination is the real limit here. L009 is up to 4 times faster than RB2011 in most cases and setups, from simple fast path routing to complex bridge filters. https://www.aerial.net/shop/imageslarge/L009UiGS-2HaxD-IN_3d.jpg https://www.aerial.net/shop/imageslarge/L009UiGS-2HaxD-IN_side.jpg https://www.aerial.net/shop/imageslarge/L009UiGS-2HaxD-IN_rear.jpg https://www.aerial.net/shop/imageslarge/L009UiGS-2HaxD-IN_contents.jpg Product code L009UiGS-2HaxD-IN Architecture ARM 64bit CPU IPQ-5018 CPU core count 2 CPU nominal frequency 800 MHz Switch chip model 88E6190 RouterOS license 5 Operating System RouterOS v7 Size of RAM 512 MB Storage size 128 MB Storage type NAND MTBF Approximately 200.000 hours at 25°C Tested ambient temperature -40°C to 70°C Wireless 2.4 GHz Max data rate 574 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n/ax Antenna gain dBi for 2.4 GHz 4 Wireless 2.4 GHz chip model IPQ-5018 Wireless 2.4 GHz generation Wi-Fi 6 WiFi speed AX600 10/100/1000 Ethernet ports 8 Number of 1G Ethernet ports with PoE-out 1 SFP ports 1 (2.5G supported) Serial console port RJ45 Number of USB ports 1 USB Power Reset Yes USB slot type USB 3.0 type A Max USB current (A) 1.5 Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 24-56 V Max power consumption 42 W Max power consumption without attachments 14 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 24-56 V PoE-out ports Ether8 PoE out Passive PoE Max out per port output (input 18-30 V) 1 A Max out per port output (input 30-57 V) 450 mA Max total out (A) 1.0 A Certification CE, FCC, IC, EAC, ROHS IP 20 https://www.aerial.net/shop/product/176_177/2919/mikrotik-mikrotik-ccr22161g12xs2xq.html MikroTik CCR2216-1G-12XS-2XQ MikroTik > Ethernet routers 2086.67 CCR2216-1G-12XS-2XQ 4752224000026 0 https://www.aerial.net/shop/imageslarge/MT-CCR1072-1G-8Splus_main.jpg CCR2216-1G-12XS-2XQ capturing the future in a standard 1U rack-mount form-factor. 100 Gigabit networking made easy and affordable – for research, ISP, file hosting and other purposes. Cloud Core Router 2216 features Marvell Prestera Aldrin2 switch-chip with L3 Hardware Offloading and four 25G CPU connection lines. With L3HW offloaded connections, this CPU can be at least 4x faster than the CCR1072 Tile CPU. There are 2x QSFP28 cages for blazing-fast 100 Gigabit connectivity, 12x SFP28 cages for 25 Gigabit networking, and a Gigabit Ethernet port. The device comes with 16 GB of RAM, 128MB NAND storage, and two M.2 SATA slots for additional storage. There are four hot-swappable fans, as well as dual-redundant hot-swap power supplies. https://www.aerial.net/shop/imageslarge/ccr2216_1g_12xs_2xq_front.jpg https://www.aerial.net/shop/imageslarge/ccr2216_1g_12xs_2xq_rear.jpg https://www.aerial.net/shop/imageslarge/ccr2216_1g_12xs_2xq_pcb.jpg https://www.aerial.net/shop/imageslarge/ccr2216_1g_12xs_2xq_contents.jpg Product code CCR2216-1G-12XS-2XQ Architecture ARM 64bit CPU AL73400 CPU core count 16 CPU nominal frequency 2000 MHz Dimensions 443 x 367 x 44 mm RouterOS license 6 Operating System RouterOS (v7 only) Size of RAM 16 GB Storage size 128 MB Storage type NAND MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -20°C to 60°C IPsec hardware acceleration Yes Number of AC inputs 2 AC input range 100-240 Max power consumption 128 W Max power consumption without attachments 80 W Cooling type 4 fans 10/100/1000 Ethernet ports 1 Number of 25G SFP28 ports 12 Number of 100G QSFP28 ports 2 Serial console port RJ45 Number of M.2 slots 2 CPU temperature monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Certification CE, EAC, ROHS IP 20 https://www.aerial.net/shop/product/176_177/3027/mikrotik-mikrotik-rb5009uprsout.html MikroTik RB5009UPr+S+OUT MikroTik > Ethernet routers 245.06 RB5009UPr+S+OUT 4752224008459 2 https://www.aerial.net/shop/imageslarge/RB5009UPr+S+OUT_main.jpg RB5009UPr+S+OUT - Outdoor Router, 7x GbE Ports, 1x 2.5GbE Port, 10G SFP+, Quad-Core CPU, 1GB DDR4 RAM, 1GB NAND, IP67 The RB5009 outdoor version is equipped with 7x Gigabit Ethernet ports, 1x 2.5 Gigabit Ethernet port and a 10 Gigabit SFP+ cage for fiber connectivity. It has the speed, the power, and the durability. Adding an IP67-rated waterproof enclosure to the RB5009 series allows meeting all the requirements. The brand new RB5009UPr+S+OUT is a compact, cost-effective solution that will revolutionize your network tower setups. Product code RB5009UPr+S+OUT Architecture ARM 64bit CPU 88F7040 CPU core count 4 CPU nominal frequency 350-1400 (auto) MHz Switch chip model 88E6393 RouterOS license 5 Operating System RouterOS (v7 only) Size of RAM 1 GB Storage size 1 GB Storage type NAND MTBF Approximately 200.000 hours at 25°C Tested ambient temperature -40°C to 70°C IPsec hardware acceleration Yes Number of DC inputs 2 (PoE-IN, 2-pin terminal) 2-pin terminal input Voltage 24-57 V Max power consumption 150 W Max power consumption without attachments 15 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 24-57 V PoE-out ports Ether1-Ether8 PoE out 802.3af/at Max out per port output (input 18-30 V) 620 mA Max out per port output (input 30-57 V) 420 mA Max total out (A) 2.59 A Total output current 2.28 Total output power 120 10/100/1000 Ethernet ports 7 Number of 1G Ethernet ports with Reverse PoE (PoE-in) 7 Number of 2.5G Ethernet ports 1 Number of 2.5G Ethernet ports with PoE-out 1 SFP+ ports 1 Number of USB ports 1 USB Power Reset Yes USB slot type USB 3.0 type A Max USB current (A) 1 CPU temperature monitor Yes Current Monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Certification CE, EAC, ROHS https://www.aerial.net/shop/product/176_177/2899/mikrotik-mikrotik-rb5009uprsin.html MikroTik RB5009UPr+S+IN MikroTik > Ethernet routers 223.65 RB5009UPr+S+IN 4752224007155 3 https://www.aerial.net/shop/imageslarge/RB5009UPr+S+IN_main.jpg RB5009UPr+S+IN A new version of our popular heavy-duty RB5009 router with PoE-in and PoE-out on all ports. Perfect for small and medium ISPs. 2.5 Gigabit Ethernet & 10 Gigabit SFP+, numerous powering options. Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ cage for fiber connectivity. We have added PoE-in & PoE-out on all eight Ethernet ports. Combined with the 2-pin connector and the DC jack, you’re getting 10 separate ways of powering. Dual redundant power supplies would usually take your uninterrupted uptime to the next level. RB5009UPr+S+IN takes it one step above that! All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. If you’re using PoE-out to power other devices, the board will choose the source with the highest voltage (DC jack or the 2-pin connector) to power those. Each PoE-out port can supply up to 25W of power. All the ports combined are limited to 130W, which should be enough for most setups. You can specify maximum available power from your power sources manually, if necessary. https://www.aerial.net/shop/imageslarge/RB5009UPr+S+IN_front.jpg https://www.aerial.net/shop/imageslarge/RB5009UPr+S+IN_side.jpg https://www.aerial.net/shop/imageslarge/RB5009UPr+S+IN_contents.jpg Product code RB5009UPr+S+IN Architecture ARM 64bit CPU 88F7040 CPU core count 4 CPU nominal frequency 350-1400 (auto) MHz RouterOS license 5 Operating System RouterOS (v7 only) Size of RAM 1 GB Storage size 1 GB Storage type NAND MTBF (Approximately) 200'000 hours at 25°C Tested ambient temperature -40°C to 60°C IPsec hardware acceleration Yes Number of DC inputs 3 (DC jack, 2-pin terminal, PoE-IN) DC jack input Voltage 24-57 V 2-pin terminal input Voltage 24-57 V Max power consumption 150 W Max power consumption without attachments 15 W Cooling type Passive PoE in 802.3af/at (ether1), Mode B (ether2-ether8) PoE in input Voltage 24-57 V PoE-out ports Ether1-Ether8 PoE out 802.3af/at Max out per port output (input 18-30 V) 640 mA Max out per port output (input 30-57 V) 420 mA Max total out (A) 2.59 A Total output current 2.28 Total output power 130 10/100/1000 Ethernet ports 7 Number of 1G Ethernet ports with Reverse PoE (PoE-in) 7 Number of 2.5G Ethernet ports 1 Number of 2.5G Ethernet ports with Reverse PoE (PoE-in) 1 SFP+ ports 1 Number of USB ports 1 USB Power Reset Yes USB slot type USB 3.0 type A Max USB current (A) 1 https://www.aerial.net/shop/product/176_177/2144/mikrotik-mikrotik-rb760igs-hex-s.html MikroTik RB760iGS, hEX S MikroTik > Ethernet routers 58.86 RB760iGS 4752224002785 0 https://www.aerial.net/shop/imageslarge/MT-RB760iGS_main.jpg hEX S Is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. Compared to the hEX, the hEX S also features an SFP port and PoE output on the last port. It is affordable, small and easy to use, but at the same time comes with a very powerful dual core 880 MHz CPU and 256 MB RAM, capable of all the advanced configurations that RouterOS supports. The device has a USB 2.0, PoE output for Ethernet port #5 and a 1.25Gbit/s SFP cage. IPsec hardware encryption (~470 Mbps) and The Dude server package is supported, microSD slot on it provides improved r/w speed for file storage and Dude. https://www.aerial.net/shop/imageslarge/MT-RB760iGS_3d.jpg https://www.aerial.net/shop/imageslarge/MT-RB760iGS_bottom.jpg https://www.aerial.net/shop/imageslarge/MT-RB760iGS_top.jpg Product code RB760iGS Architecture MMIPS CPU MT7621A CPU core count 2 CPU nominal frequency 880 MHz CPU Threads count 4 Dimensions 113 x 89 x 28 mm License level 4 Operating System RouterOS Size of RAM 256 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C .. +70°C Max Power consumption 11W PoE in 802.3af/at PoE out Passive PoE up to 57V PoE in input Voltage 12-57 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 12-57 V 10/100/1000 Ethernet ports 5 SFP ports 1 Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 https://www.aerial.net/shop/product/176_178/2023/mikrotik-mikrotik-crs1061c5s-5x-sfp.html MikroTik CRS106-1C-5S, 5x SFP + 1x Combo (SFP/ETH), ROS L5 MikroTik > Switches 43.88 CRS106-1C-5S 4752224000101 1 https://www.aerial.net/shop/imageslarge/MT-CRS106-1C-5S_main.jpg CRS106-1C-5S The Cloud Router Switch 106-1C-5S is a desktop size smart switch, equipped with one Gigabit Ethernet / SFP combo port and five 1.25Gbps SFP cages. Powered by a 400MHz CPU and 128MB RAM, it runs RouterOS with a L5 license and supports 11- 30V power. https://www.aerial.net/shop/imageslarge/MT-CRS106-1C-5S_rear.jpg Product code CRS106-1C-5S Architecture MIPSBE CPU QCA8511 CPU core count 1 CPU nominal frequency 400 MHz Dimensions 114 x 137 x 29mm License level 5 Operating System RouterOS Size of RAM 128 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -20°C .. +70°C Max Power consumption 11W PoE in Passive PoE PoE in input Voltage 11-30 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 11-30 V Ethernet Combo ports 1 SFP ports 5 Serial port RJ45 https://www.aerial.net/shop/product/176_178/2908/mikrotik-mikrotik-cloud-smart-switch.html MikroTik Cloud Smart Switch CSS610-8P-2S+IN MikroTik > Switches 170.14 CSS610-8P-2S+IN 4752224007216 2 https://www.aerial.net/shop/imageslarge/css610_8p_2s_in_main.jpg CSS610-8P-2S+IN - Compact, affordable PoE powerhouse with 8x Gigabit PoE-out ports and 2x 10 Gigabit SFP+ ports. CSS610-8P-2S+IN is one of the most well-rounded switches on the market. It is a perfect fit for the most diverse setups: from home networks and small offices to hotels, call centers and so on. The unique combination of size, features, and price offers unbelievable scalability potential. There are two SFP+ ports for 10 Gigabit fiber connectivity and eight Gigabit Ethernet ports with 802.3af/at and passive PoE-out (you only need a single PSU to provide both) combination of SFP+ and PoE-out Ethernet ports. CSS610 has an impressive total PoE-out budget of 140W https://www.aerial.net/shop/imageslarge/css610_8p_2s_in_3d.jpg https://www.aerial.net/shop/imageslarge/css610_8p_2s_in_rear.jpg https://www.aerial.net/shop/imageslarge/css610_8p_2s_in_contents.jpg Product code CSS610-8P-2S+IN Operating System SwitchOS Lite Storage size 64 KB Storage type FLASH MTBF (Approximately) 200'000 hours at 25°C Tested ambient temperature -40°C to 70°C Number of AC inputs 1 AC input range 100-240 Number of DC inputs 1 (DC jack) DC jack input Voltage 48-57 V Max power consumption 162 W Max power consumption without attachments 12 W Cooling type Passive PoE-out ports Eth1-Eth8 PoE out 802.3af/at Max out per port output (input 18-30 V) 1000 mA Max out per port output (input 30-57 V) 625 mA Total output power 140 10/100/1000 Ethernet ports 8 Number of 1G Ethernet ports with PoE-out 8 SFP+ ports 2 CPU temperature monitor Yes Voltage Monitor Yes Certification CE, EAC, ROHS IP 20 https://www.aerial.net/shop/product/176_178/1974/mikrotik-mikrotik-css32624g2srm-24-port.html MikroTik CSS326-24G-2S+RM, 24 port Gigabit Cloud Smart Switch MikroTik > Switches 120.92 CSS326-24G-2S+RM 4752224002334 1 https://www.aerial.net/shop/imageslarge/MT-CSS326-24G-2S+RM_main.jpg CSS326-​24G-2S+RM Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case that provides wire speed connectivity with several new switching features. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules. https://www.aerial.net/shop/imageslarge/MT-CSS326-24G-2S+RM_rear.jpg Product code CSS326-24G-2S+RM Dimensions 440 x 144 x 44 mm Operating System SwOS Storage size 2 MB Storage type FLASH Tested ambient temperature -40°C .. +70°C Max Power consumption 19W PoE in Passive PoE PoE in input Voltage 10-30 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 10-30 V 10/100/1000 Ethernet ports 24 SFP+ ports 2 https://www.aerial.net/shop/product/176_178/2609/mikrotik-mikrotik-css6108g2sin.html MikroTik CSS610-8G-2S+IN MikroTik > Switches 88.81 CSS610-8G-2S+IN 4752224006929 1 https://www.aerial.net/shop/imageslarge/MT-CSS610-8G-2S+IN_main.jpg CSS610-8G-2S+IN - Eight 1G Ethernet ports and two SFP+ ports for 10G fiber connectivity. Portable, powerful and extremely cost-effective – this switch is an instant classic! Cloud Smart Switch 610-8G-2S+IN is our answer to the everlasting demand for more power in a small and simple package. It comes with the lightweight SwOS which is easy to configure from your web browser. It gives you all the basic functionality for a managed switch, and more: you can manage port-to-port forwarding, broadcast storm control, apply MAC filters, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. https://www.aerial.net/shop/imageslarge/MT-CSS610-8G-2S+IN_front.jpg https://www.aerial.net/shop/imageslarge/MT-CSS610-8G-2S+IN_rear.jpg https://www.aerial.net/shop/imageslarge/MT-CSS610-8G-2S+IN_contents.jpg Product code CSS610-8G-2S+IN Dimensions 200 x 167 x 46 mm Operating System SwitchOS Storage size 64 KB Storage type FLASH Tested ambient temperature -20°C to 60°C PoE in Passive PoE PoE in input Voltage 12-57 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 12-57 V Max power consumption 11 W Max power consumption without attachments 5 W FAN count Passive 10/100/1000 Ethernet ports 8 SFP+ ports 2 Certification CE, EAC, ROHS https://www.aerial.net/shop/product/176_178/2925/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS305-1G-4S+OUT, FiberBox Plus MikroTik > Switches 171.22 CRS305-1G-4S+OUT 4752224006523 1 https://www.aerial.net/shop/imageslarge/fiberboxplus_main.jpg FiberBox Plus - Ultimate value pick for 10 Gigabit outdoor networking. High masts, poles, or towers – your connection will be safe! A powerful budget version of the netFiber 9. Outdoor 4-port SFP+ switch without fan and with fins on the back with routing option offers Gigabit Ethernet for management or PoE IN power supply, 4 optical SFP+ ports with speed 1/10 Gbps, console RJ45 port, DC connector and terminal block with 24 to 57 V DC supply. The Switch has a very robust chassis with water protection IP66, the possibility of installation on a wall or a mast, and in the lower part there are doors for 4 cross-head screws and 3 large cable grommets with enough space for all cables. Both RouterOS v7 with an L5 license and SwitchOS, which is intended for easier management, are installed inside the device. https://www.aerial.net/shop/imageslarge/fiberboxplus_rear.jpg https://www.aerial.net/shop/imageslarge/fiberboxplus_ports.jpg https://www.aerial.net/shop/imageslarge/fiberboxplus_door.jpg https://www.aerial.net/shop/imageslarge/fiberboxplus_contents.jpg Product code CRS305-1G-4S+OUT Architecture ARM 32bit CPU 98DX226S CPU core count 2 CPU nominal frequency 800 MHz RouterOS license 5 Operating System RouterOS v7 / SwOS Size of RAM 256 MB Storage size 16 MB Storage type FLASH MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -40°C to 70°C Number of DC inputs 3 (2-pin terminal, DC jack, PoE-IN) DC jack input Voltage 24-57 V 2-pin terminal input Voltage 24-57 V Max power consumption 17 W Max power consumption without attachments 7 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 42-57 V 10/100/1000 Ethernet ports 1 SFP+ ports 4 Serial console port RJ45 CPU temperature monitor Yes Certification CE, EAC, ROHS IP IP66 https://www.aerial.net/shop/product/176_178/3345/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS320-8P-8B-4S+RM MikroTik > Switches 405.56 CRS320-8P-8B-4S+RM 4752224008831 0 https://www.aerial.net/shop/imageslarge/crs320_8p_8b_4s_rm_3.jpg CRS320-8P-8B-4S+RM - The first MikroTik high-power PoE++ switch, for easy and cost-effective powering of industry standard 802.3af/at/bt devices. The Cloud Router Switch CRS320-8P-8B-4S+RM is a PoE switch supporting the 802.3af/at and 802.3bt standards with a total PoE budget of 600 W (up to 1150 W with an additional power supply). The switch offers 17 Gigabit LAN ports, the first eight supports 802.3af/at PoE (maximum 30 W/port), the next eight supports 802.3af/at/bt (maximum 90 W/port), and it also includes 4 10 Gigabit SFP+ ports. It is powered by a Hot-swap power supply with a capacity of 600 W, with the option to purchase a second power supply to increase the total power capacity to 1150 W, but not for redundancy. The maximum device consumption is 36 W. Features : https://www.aerial.net/shop/imageslarge/crs320_8p_8b_4s_rm_1.jpg https://www.aerial.net/shop/imageslarge/crs320_8p_8b_4s_rm_2.jpg https://www.aerial.net/shop/imageslarge/crs320_8p_8b_4s_rm_4.jpg Product code CRS320-8P-8B-4S+RM Architecture ARM 32bit CPU 98DX226S CPU core count 2 CPU nominal frequency 800 MHz Switch chip model 98DX226S RouterOS license 5 Operating System RouterOS v7 / SwitchOS Size of RAM 256 MB Storage size 32 MB Storage type FLASH MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -10°C to 50°C Number of AC inputs 1 AC input range 100-240 Number of PSU slots 2 Frequency (Hz) 50-60 Max power consumption 600W (1150W with additional PSU) Max power consumption without attachments 36 W Cooling type 3 fans PoE-out ports Ether1-Ether8 (af/at) Ether9-Ether16 (bt) PoE out 802.3af/at/bt Max out per port output (input 30-57 V) 560 (af/at) / 1667 (bt) mA Max total out (A) 17.82 A Total output current 17.82 Total output power 963 10/100/1000 Ethernet ports 17 Number of 1G Ethernet ports with PoE-out 16 SFP+ ports 4 Serial console port RJ45 CPU temperature monitor Yes PCB temperature monitor Yes Voltage Monitor Yes https://www.aerial.net/shop/product/176_178/2398/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS354-48G-4S+2Q+RM MikroTik > Switches 459.07 CRS354-48G-4S+2Q+RM 4752224002266 0 https://www.aerial.net/shop/imageslarge/MT-CRS354-48G-4S+2Q+RM_main.jpg CRS354-48G-4S+2Q+RM - Best price and best performance on the market – this 48 port switch will rock any setup, including 40 Gbps devices! If you are looking for a single switch that will put your network setup ahead of the curve without costing a fortune, look no further. The new CRS354-48G-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in demanding and busy environments. With this product we aim to set a new price-performance bar – get more features while spending way less! This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices. The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps. https://www.aerial.net/shop/imageslarge/MT-CRS354-48G-4S-2Q-RM_front.jpg https://www.aerial.net/shop/imageslarge/MT-CRS354-48G-4S-2Q-RM_rear.jpg https://www.aerial.net/shop/imageslarge/MT-CRS354-48G-4S-2Q-RM_contents.jpg Product code CRS354-48G-4S+2Q+RM Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Dimensions 297 x 443 x 44 mm License level 5 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -20°C to 60°C Number of AC inputs 2 AC input range 100-240 Max power consumption 60 W Max power consumption without attachments 50 W 10/100 Ethernet ports 1 10/100/1000 Ethernet ports 48 SFP+ ports 4 Number of 40G QSFP+ ports 2 Serial port RJ45 PCB temperature monitor Yes Voltage Monitor Yes Certification CE/RED, EAC, ROHS https://www.aerial.net/shop/product/176_178/2988/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS510-8XS-2XQ-IN MikroTik > Switches 747.99 CRS510-8XS-2XQ-IN 4752224008466 0 https://www.aerial.net/shop/imageslarge/crs510_8xs_2xq_in_main.jpg CRS510-8XS-2XQ-IN - A 100 Gigabit switch. 2x 100 Gigabit QSFP28 ports, 8x 25 Gigabit SFP28 ports, dual hot-swap power supplies. CRS510-8XS-2XQ-IN is a versatile 100 Gigabit switch with two 100 Gigabit QSFP28 ports and eight 25 Gigabit SFP28 ports. This combination of ports guarantees a perfect fit in almost any setup or server room. CRS510 will keep connected various direct attach cables, active optical cables and copper RJ45’s. Thanks to the backward compatibility this switch supports all sorts of devices - 40 Gigabit, 25 Gigabit, 10 Gigabit, and even Gigabit connections. CRS510-8XS-2XQ-IN can handle VLANs, ACL, MLAG, Jumbo frames, and even some L3 hardware offloading. The Marvell Prestera switch chip handles most tasks without overloading power consumption – the maximum power consumption is only 27W without attachments and 45W with attachments. The switch has dual hot-swap power supplies and three other powering options: PoE-in, DC jack, and a 2-pin terminal. https://www.aerial.net/shop/imageslarge/crs510_8xs_2xq_in_rear.jpg https://www.aerial.net/shop/imageslarge/crs510_8xs_2xq_in_3d.jpg https://www.aerial.net/shop/imageslarge/crs510_8xs_2xq_in_contents.jpg Product code CRS510-8XS-2XQ-IN Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Switch chip model 98DX4310 RouterOS license 5 Operating System RouterOS v7 Size of RAM 128 MB Storage size 32 MB Storage type FLASH MTBF (Approximately) 200'000 hours at 25°C Tested ambient temperature -40°C to 70°C Number of AC inputs 2 AC input range 100-240 Number of DC inputs 3 (2-pin terminal, DC jack, PoE-IN) DC jack input Voltage 36-57 V 2-pin terminal input Voltage 36-57 V Frequency (Hz) 47-63 Max power consumption 45 W Max power consumption without attachments 27 W Cooling type 2 fans PoE in 802.3 bt PoE in input Voltage 42.5-57 V 10/100 Ethernet ports 1 Number of 25G SFP28 ports 8 Number of 100G QSFP28 ports 2 Serial console port RJ45 CPU temperature monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Certification CE, EAC, ROHS IP 20 https://www.aerial.net/shop/product/176_178/2348/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS305-1G-4S+IN, Dual Boot (SwitchOS, RouterOS) MikroTik > Switches 111.29 CRS305-1G-4S+IN 4752224002136 2 https://www.aerial.net/shop/imageslarge/MT-CRS305-1G-4S+IN_main.jpg CRS305-1G-4S+IN Five-port desktop switch with one Gigabit Ethernet port and four SFP+ 10Gbps ports The CRS305 is a compact yet very powerful switch, featuring four SFP+ ports, for up to 10 Gbit per port. The device has a 1 Gbit copper ethernet port for management access and two DC jacks for power redundancy. The device is a very sleek and compact metallic case without any fans, for silent operation. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with a disruptive price, providing the best price/performance on the market. Product code CRS305-1G-4S+IN Architecture ARM 32bit CPU 98DX3236 CPU core count 1 CPU nominal frequency 800 MHz Dimensions 141 x 115 x 28 mm License level 5 Operating System RouterOS / SwitchOS Size of RAM 512 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C PoE in 802.3af/at PoE in input Voltage 12-57 V Number of DC inputs 3 (PoE-IN, DC jack) DC jack input Voltage 12-57 V Max power consumption 18 W Max power consumption without attachments 10 W 10/100/1000 Ethernet ports 1 SFP+ ports 4 https://www.aerial.net/shop/product/176_178/2918/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS310-1G-5S-4S+IN MikroTik > Switches 148.74 CRS310-1G-5S-4S+IN 4752224007827 1 https://www.aerial.net/shop/imageslarge/CRS310-1G-5S-4S+IN_main.jpg CRS310-1G-5S-4S+IN - Cloud Router Switch, 1x Gigabit Ethernet Port, 5x 1G SFP Ports, 4x 10G SFP Ports 10 Gigabit fibre connectivity way over a 100 meters – for small offices or ISPs. With five 1G SFP ports, four 10G SFP+ ports, and an additional Gigabit Ethernet port, this is the perfect upgrade for existing CRS212 setups. The Gigabit Ethernet port has a direct connection to the switch chip – so you can enjoy full gigabit speed there. And it supports PoE-in, giving you an additional powering option in hard-to-reach places. You can mount this switch in a standard 1U rack to keep everything organized. And it has all the power you would expect from a rackmount device: CRS310 supports hardware offloaded LAN filtering and even some hardware offloaded Layer-3 routing. CRS310-1G-5S-4S+IN is a fantastic tool for anyone working with indoor connections over 100 meters while keeping data loss and ping low. Optical fiber can be a great alternative to copper if you are worried about electromagnetic interference, tampering or eavesdropping. https://www.aerial.net/shop/imageslarge/CRS310-1G-5S-4S+IN_front.jpg https://www.aerial.net/shop/imageslarge/CRS310-1G-5S-4S+IN_rear.jpg https://www.aerial.net/shop/imageslarge/CRS310-1G-5S-4S+IN_contents.jpg 10/100/1000 Ethernet ports 1 SFP ports 5 SFP+ ports 4 Certification CE, EAC, ROHS IP 20 Product code CRS310-1G-5S-4S+IN Architecture ARM 32bit CPU 98DX226S CPU core count 1 CPU nominal frequency 800 MHz Dimensions 200 x 166 x 45 mm RouterOS license 5 Operating System RouterOS Size of RAM 256 MB Storage size 16 MB Storage type FLASH MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -40°C to 70°C Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 18-57 V Max power consumption 20 W Max power consumption without attachments 8 W Cooling type 1 fan PoE in 802.3af/at PoE in input Voltage 18-57 V https://www.aerial.net/shop/product/176_178/2924/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS504-4XQ-IN MikroTik > Switches 598.19 CRS504-4XQ-IN 4752224007407 0 https://www.aerial.net/shop/imageslarge/crs504_4xq_in_main.jpg CRS504-4XQ-IN - Cloud Router Switch, 1x 100Mbit Ethernet port, 4x 100G QSFP28 ports, RouterOS v7 Optical Cloud Router Switch CRS504-4XQ-IN is a suitable 19" rackmount solution for access to 100 Gbps networks and as a small central optical switch that offers 4x QSFP28 s at 100 Gbps, 1x Ethernet port with support for passive PoE power supply and console RJ45 port. The switch can be powered via two redundant Hot-swap sources, DC connector/DC terminal block (36 - 57V DC), as well as via an Ethernet port supporting passive PoE with a voltage of 43 - 57V DC. The maximum power consumption of the device is 41 W. https://www.aerial.net/shop/imageslarge/crs504_4xq_in_front.jpg https://www.aerial.net/shop/imageslarge/crs504_4xq_in_rear.jpg https://www.aerial.net/shop/imageslarge/crs504_4xq_in_brackets.jpg https://www.aerial.net/shop/imageslarge/crs504_4xq_in_contents.jpg Product code CRS504-4XQ-IN Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Dimensions 320 x 185 x 44 mm RouterOS license 5 Operating System RouterOS (v7 only) Size of RAM 64 MB Storage size 16 MB Storage type FLASH MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -40°C to 70°C Number of AC inputs 2 AC input range 100-240 Number of DC inputs 3 (DC jack, PoE-IN, 2-pin terminal) DC jack input Voltage 36-57 V 2-pin terminal input Voltage 36-57 V Frequency (Hz) 47-63 Max power consumption 41 W Max power consumption without attachments 25 W Cooling type 2 fans PoE in 802.3 bt PoE in input Voltage 43-57 V 10/100 Ethernet ports 1 Number of 100G QSFP28 ports 4 Serial console port RJ45 CPU temperature monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Certification CE, EAC, ROHS IP 20 https://www.aerial.net/shop/product/176_178/2068/mikrotik-mikrotik-crs3171g16srm-1xglan-16xsfpcage.html MikroTik CRS317-1G-16S+RM, 1xGLAN, 16xSFP+cage, Dual PSU, 1U, L5 MikroTik > Switches 373.45 CRS317-1G-16S+RM 4752224002167 1 https://www.aerial.net/shop/imageslarge/MT-CRS317-1G-16S+RM_main.jpg CRS317-1G-16S+RM It is a rack-mountable manageable switch with Layer3 features, it has 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management. Is powered by a next generation switching chip, giving you wire speed performance for all sixteen 10GbE ports with any Ethernet frame size. New features such as hardware-based Spanning Tree Protocol and Link Aggregation (LACP) provide enhanced protection and true professional performance for your demanding network. The unit has dual redundant power supplies and passive cooling case, so it’s completely silent - for hot environments two redundant fans will automatically keep the system cool if needed. https://www.aerial.net/shop/imageslarge/MT-CRS317-1G-16S+RM_rear.jpg https://www.aerial.net/shop/imageslarge/MT-CRS317-1G-16S+RM_contents.jpg Product code CRS317-1G-16S+RM Architecture ARM 32bit CPU 98DX8216B0-BRR4C000 CPU core count 2 CPU nominal frequency 800 MHz Dimensions 443 x 224 x 44 mm License level 6 Operating System RouterOS or SwitchOS Size of RAM 1 GB Storage size 16 MB Storage type FLASH Tested ambient temperature -20°C to 60°C Max Power consumption 42W Number of AC inputs 2 AC input range 100-240 V 10/100/1000 Ethernet ports 1 SFP+ ports 16 https://www.aerial.net/shop/product/176_178/2353/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS312-4C+8XG-RM MikroTik > Switches 528.63 CRS312-4C+8XG-RM 4752224002150 0 https://www.aerial.net/shop/imageslarge/MT-CRS312-4C+8XG-RM_main.jpg Introducing CRS312-4C+8XG-RM – our first product with 10G RJ45 Ethernet ports.Remove the bottleneck from your network setup – it is time to upgrade that 1 Gigabit switch to something truly powerful and enjoy real speed. Moreover, it also has 4 x 10G combo ports: use them for 10G RJ45 Ethernet or 10G SFP+, when you need an additional fiber connection. Combo ports can be used alongside the 8 regular 10G RJ45 Ethernet ports at all times. These ports can also be software selected, so you can use RouterOS scripting, to decide which combo ports will be active. This device is a practical solution for those who work with huge data files and need fast, capable connection 24/7: multimedia production, scientific research, game development, big data analysis and so on. CRS312-4C+8XG-RM has a dual power supply for redundancy – no unexpected downtime when the deadlines are looming. It has a full size USB, a console port for configuration and a 1U rackmount case – fits all the standard racks. You can choose between our legendary feature-packed RouterOS for booting or a simpler, but still powerful SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. This switch has a great total non-blocking throughput of 120 Gbps, switching capacity of 240 Gbps and forwarding rate of 178 Mpps. CRS312-4C+8XG-RM – built for professionals, great for everyone! https://www.aerial.net/shop/imageslarge/MT-CRS312-4C+8XG-RM_rear.jpg https://www.aerial.net/shop/imageslarge/MT-CRS312-4C+8XG-RM_contents.jpg Product code CRS312-4C+8XG-RM Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Dimensions 443 x 183 x 44 mm License level 5 Operating System RouterOS / SwitchOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -30°C to 70°C Number of AC inputs 2 AC input range 100-240 Max power consumption 60 W 10/100 Ethernet ports 1 Number of Combo 10G Ethernet/ SFP ports 4 Number of 1G/2.5G/5G/10G Ethernet ports 8 Serial port RJ45 Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 https://www.aerial.net/shop/product/176_178/2394/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS354-48P-4S+2Q+RM MikroTik > Switches 747.99 CRS354-48P-4S+2Q+RM 4752224002273 0 https://www.aerial.net/shop/imageslarge/MT-CRS354-48P-4S+2Q+RM_main.jpg CRS354-48P-4S+2Q+RM - The 48 port champion you’ve been waiting for - now with PoE-out! If you are looking for a single switch that will put your network setup ahead of the curve and power all the necessary devices – look no further! The new CRS354-48P-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in the most demanding environments. Unlike many other switches out there, our products are made with the system administrator in mind. This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices. All 48 Ethernet ports offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing, making this switch the easiest solution to power even the largest setups. We have included a mighty power supply that can provide 750 W of power – this switch can handle a lot. And there is a special bracket for easy cable management. CRS354-48P-4S+2Q+RM is extremely functional, and it has the best price-point on the market – it will make the perfect addition to a professional setup. The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps. https://www.aerial.net/shop/imageslarge/MT-CRS354-48P-4S-2Q-RM_rear.jpg https://www.aerial.net/shop/imageslarge/MT-CRS354-48P-4S-2Q-RM_front.jpg https://www.aerial.net/shop/imageslarge/MT-CRS354-48P-4S-2Q-RM_contents.jpg Product code CRS354-48P-4S+2Q+RM Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Dimensions 443 x 382 x 44 mm License level 5 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -20°C to 60°C Number of AC inputs 1 AC input range 100-240 Max power consumption 800 W Max power consumption without attachments 85 W PoE-out ports 48 ports with 802.3af/at and passive modes PoE out 802.3af/at Max out per port output (input < 30 V) 1000 mA Max out per port output (input > 30 V) 570 mA Total output current 27A at 26V OR 13.2A at 53V Total output power 700W 10/100 Ethernet ports 1 10/100/1000 Ethernet ports 48 SFP+ ports 4 Number of 40G QSFP+ ports 2 Serial port RJ45 CPU temperature monitor Yes Current Monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Certification CE/RED, EAC, ROHS https://www.aerial.net/shop/product/176_178/2783/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS310-1G-5S-4S+OUT - netFiber 9 MikroTik > Switches 186.19 CRS310-1G-5S-4S+OUT 4752224007834 1 https://www.aerial.net/shop/imageslarge/MT-CRS310-1G-5S-4S+OUT_main.jpg netFiber 9 - A remarkable outdoor switch for setting up an optical 10G network that can even perform some light routing. The spiritual successor to the beloved FiberBox. Gigabit Ethernet, SFP/SFP+, PoE. netFiber 9 is a powerful outdoor switch with SFP, SFP+, and Gigabit Ethernet. It features a powerful ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in, so you don’t have to rely on the DC jack for powering in tight, hard- to-reach spots. There is a console port, followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why we designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy. The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet. There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation, it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws, so you can attach the netFiber to a pole, wall, or mast right away. netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports, a powerful CPU, and a rugged case, netFiber 9 is a real bargain that will make your network management so much easier! Product code CRS310-1G-5S-4S+OUT Architecture ARM 32bit CPU 98DX226S CPU core count 1 CPU nominal frequency 800 MHz MTBF Approximately 200'000 hours at 25C License level 5 Operating System RouterOS/SwitchOS Size of RAM 256 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C Number of DC inputs 2 (PoE-IN, DC jack) DC jack input Voltage 18-57 V Max power consumption 16.3 W Max power consumption without attachments 10 W FAN count Passive PoE in 802.3af/at PoE in input Voltage 18-57 V 10/100/1000 Ethernet ports 1 SFP ports 5 SFP+ ports 4 CPU temperature monitor Yes Voltage Monitor Yes Certification CE/RED, EAC, ROHS https://www.aerial.net/shop/product/176_178/3145/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS326-4C+20G+2Q+RM, 20x2.5G, 4xSFP+, 2xQSFP MikroTik > Switches 747.99 CRS326-4C+20G+2Q+RM 4752224008930 0 https://www.aerial.net/shop/imageslarge/crs326_4c_20g_2q_rm_1.jpg CRS326-4C+20G+2Q+RM - Top-of-the-line switch with incredible 2.5 Gigabit port density, combo ports, and even a pair of 40 Gbps QSFP+ cages. There are 20x 2.5 Gigabit Ethernet ports, 4x COMBO ports that can either be used as 4x additional 2.5 Gigabit Ethernet ports OR as 10G SFP+ interfaces, and on top of all that – there are 2x 40 Gigabit QSFP+ cages for ultra-fast fiber connectivity. The mighty Marvell Prestera switch-chip that comes with a dedicated CPU can handle all your daily tasks without breaking a sweat. VLAN’s, Jumbo frames, link aggregation, ACL rules… You can even do some Layer3 routing! Dual-redundant power supplies and an extra 100 Mbps Ethernet port for management purposes will save you a lot of troubles in the long run. https://www.aerial.net/shop/imageslarge/crs326_4c_20g_2q_rm_2.jpg https://www.aerial.net/shop/imageslarge/crs326_4c_20g_2q_rm_3.jpg https://www.aerial.net/shop/imageslarge/crs326_4c_20g_2q_rm_4.jpg Product code CRS326-4C+20G+2Q+RM Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Switch chip model 98DX8332 RouterOS license 6 Operating System RouterOS v7 Size of RAM 128 MB Storage size 32 MB Storage type FLASH MTBF Approximately 200.000 hours at 25°C Tested ambient temperature -20°C to 60°C Number of AC inputs 2 AC input range 100-240 Max power consumption 70 W Max power consumption without attachments 51 W Cooling type 2 fans 10/100 Ethernet ports 1 Number of 2.5G Ethernet ports 20 Number of Combo 10G Ethernet/ SFP+ ports 4* (2.5G ETH/10G SFP+) Number of 40G QSFP+ ports 2 Serial console port RJ45 PCB temperature monitor Yes Voltage Monitor Yes Certification CE, EAC, ROHS IP 20 https://www.aerial.net/shop/product/176_178/2191/mikrotik-mikrotik-crs32824p4srm-24-port.html MikroTik CRS328-24P-4S+RM, 24 port Gigabit Cloud Smart Switch MikroTik > Switches 405.56 CRS328-24P-4S+RM 4752224002228 2 https://www.aerial.net/shop/imageslarge/MT-CRS328-24P-4S+RM_main.jpg CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. PoE-Out is passed over mode B pins (4,5+)(7,8-). The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included). CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in. The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W of power with any power output option you choose. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with disruptive price, providing best price/performance on the market. https://www.aerial.net/shop/imageslarge/MT-CRS328-24P-4S+RM_3d.jpg Product code CRS328-24P-4S+RM Architecture ARM 32bit CPU 98DX3236 CPU core count 1 CPU nominal frequency 800 MHz Dimensions 443 x 305 x 44 mm License level 5 Operating System RouterOS / SwitchOS Size of RAM 512 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -20°C to 60°C PoE out 802.3af/at Number of AC inputs 1 AC input range 100-240 Max out per port output (input > 30 V) 450 mA Max out per port output (input < 30 V) 1000 mA Max total out (A) 20 A Max power consumption 494 W Max power consumption without attachments 44 W 10/100/1000 Ethernet ports 24 SFP+ ports 4 Serial port RJ45 CPU temperature monitor Yes PCB temperature monitor Yes Mode button Yes https://www.aerial.net/shop/product/176_178/2926/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS518-16XS-2XQ-RM MikroTik > Switches 1197.44 CRS518-16XS-2XQ-RM 4752224007438 0 https://www.aerial.net/shop/imageslarge/crs518_16xs_2xq_main.jpg CRS518-16XS-2XQ-RM - 100 Gigabit Switch, 2X 100G QSFP28 Ports, 16X 25G SFP28 Ports, Hot-Swap Fans and Power supplies, Ultra Fast Switch-Chip MikroTik Cloud Router Switch CRS518-16XS-2XQ-RM is a feature-packed backbone switch for your network and features 2× QSFP28 (100 Gbps), 16× SFP28 (1/10/25 Gbps), one 10/100Mbps metal port intended only for management, console RJ45 port, two Hot-Swap power modules and four Hot-Swap fans. The switch thus provides a total throughput of 600 Gbps, a switching capacity of 1.2 Tbps, forwarding up to 600 Mpps for most common packets and, thanks to the Marvell Prestera Aldrin2 switch chip, also L3 Hardware Offloading. If you work with a large amount of data, for example as an Internet Service Provider or Data Center Administrator, then this switch is the perfect upgrade for your network. https://www.aerial.net/shop/imageslarge/crs518_16xs_2xq_rear.jpg https://www.aerial.net/shop/imageslarge/crs518_16xs_2xq_side.jpg https://www.aerial.net/shop/imageslarge/crs518_16xs_2xq_contents.jpg Product code CRS518-16XS-2XQ-RM Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz RouterOS license 6 Operating System RouterOS (v7 only) Size of RAM 64 MB Storage size 16 MB Storage type FLASH MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -40°C to 70°C Number of AC inputs 2 AC input range 100-240 Frequency (Hz) 47-63 Max power consumption 95 W Max power consumption without attachments 45 W Cooling type 4 fans 10/100 Ethernet ports 1 Number of 25G SFP28 ports 16 Number of 100G QSFP28 ports 2 Serial console port RJ45 Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 CPU temperature monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Certification CE, EAC, ROHS IP 20 https://www.aerial.net/shop/product/176_178/2351/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS328-4C-20S-4S+RM, ROS L5 MikroTik > Switches 336.00 CRS328-4C-20S-4S+RM 4752224002242 0 https://www.aerial.net/shop/imageslarge/MT-CRS328-4C-20S-4S+RM_main.jpg The CRS328-4C-20S-4S+RM is a 28 independent port switch with a combo group. This device has twenty SFP ports, four SFP+ ports for 10G modules and four combo ports, where you can choose to use SFP or RJ45 ports from the combo group. These ports can also be software selected, so if you have plugged in all eight cables, you can use scripting, to decide which four combo ports will be active. The device comes in a 1U rackmount case with two 100-240 V power supplies with failover functionality. A RJ45 console port is available for management and debugging, and a mode button can be customised to execute any RouterOS commands. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. https://www.aerial.net/shop/imageslarge/MT-CRS328-4C-20S-4S+RM_rear.jpg https://www.aerial.net/shop/imageslarge/MT-CRS328-4C-20S-4S+RM_components.jpg Product code CRS328-4C-20S-4S+RM Architecture ARM 32bit CPU 98DX3236 CPU core count 1 CPU nominal frequency 800 MHz Dimensions 443 x 194 x 44 mm License level 5 Operating System RouterOS / SwitchOS Size of RAM 512 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -20°C to 60°C Number of AC inputs 2 AC input range 100-240 Max power consumption 43 W Ethernet Combo ports 4 SFP ports 20 SFP+ ports 4 Serial port RJ45 CPU temperature monitor Yes Voltage Monitor Yes Mode button Yes https://www.aerial.net/shop/product/176_178/1452/mikrotik-mikrotik-rb260gsp-5-glan.html MikroTik RB260GSP, 5 GLAN, 1 SFP, PoE, SwOS MikroTik > Switches 41.73 CSS106-1G-4P-1S 4752224002297 4 https://www.aerial.net/shop/imageslarge/MT-rb260gs_main.jpg The RB260GSP is a small SOHO switch, which features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit (passive PoE over datalines only). The RB260GSP has five Gigabit Ethernet ports and one SFP cage, switching is done by an Atheros Switch Chip. The device is running an operating system designed specifically for MikroTik Switch products - SwOS. https://www.aerial.net/shop/imageslarge/MT-RB260GSP_rear.jpg https://www.aerial.net/shop/imageslarge/MT-RB260GSP_ports.jpg Product code RB260GSP Architecture RISC Dimensions 113x139x28mm Operating System MikroTik SwOS Storage size 128 KB Storage type FLASH Tested ambient temperature -25℃ to +65℃ PoE in Passive PoE PoE out Passive PoE PoE in input Voltage 8-30 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 8-30 V 10/100/1000 Ethernet ports 5 SFP DDMI Yes SFP ports 1 PCB temperature monitor Yes Voltage Monitor Yes https://www.aerial.net/shop/product/176_178/2531/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS318-16P-2S+OUT - netPower 16P MikroTik > Switches 208.67 CRS318-16P-2S+OUT 4752224002174 0 https://www.aerial.net/shop/imageslarge/MT-CRS318-16P-2SplusOUT_main.jpg netPower 16P - An outdoor 18 port switch with 16 Gigabit PoE-out ports and 2 SFP+. Power all your access points anywhere! Powering a bunch of access points or IP cameras and a few uplinks on a tower has never been easier. netPower 16P has 16 Gigabit Ethernet ports with PoE-out and two SFP+ ports for 10G fiber uplinks. Its sturdy and compact outdoor enclosure allows the switch to be mounted in all kinds of environments – from damp attics and shafts to towers, masts and poles with hose clamps. netPower 16P has a non-blocking throughput of 36 Gbps, switching capacity of 72 Gbps and forwarding rate of 53.6 Mpps. Device itself does not have onboard voltage converter. You need 24V PSU to have 24V PoE out and/or 48V PSU to have 48V PoE out (IEEE 802.3 at/af). * Power supply is NOT included with the product. You are welcome to use your preferred power option, like battery pack etc. Compatible also with MikroTik power supplies 24HPOW, 48POW and 48V2A96W https://www.aerial.net/shop/imageslarge/MT-CRS318-16P-2SplusOUT_front.jpg https://www.aerial.net/shop/imageslarge/MT-CRS318-16P-2SplusOUT_rear.jpg https://www.aerial.net/shop/imageslarge/MT-CRS318-16P-2SplusOUT_contents.jpg Product code CRS318-16P-2S+OUT Architecture ARM 32bit CPU 98DX226S CPU core count 1 CPU nominal frequency 800 MHz Dimensions 303 x 212 x 78 mm License level 5 Operating System RouterOS/SwitchOS Size of RAM 256 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C Number of DC inputs 2 (DC jack) DC jack input Voltage 18-30 V/48-57 V Max power consumption 316 W Max power consumption without attachments 16 W PoE-out ports Ether1-Ether16 PoE out 802.3af/at Max out per port output (input < 30 V) 1.1 A Max out per port output (input > 30 V) 0.6 A Max total out (A) 2.8A (18V-30V) & 1.4A (48V-57V) x2 A 10/100/1000 Ethernet ports 16 Number of 1G Ethernet ports with PoE-out 16 SFP+ ports 2 CPU temperature monitor Yes Voltage Monitor Yes Certification CE/RED, EAC, ROHS https://www.aerial.net/shop/product/176_178/2747/mikrotik-mikrotik-rb260gs-5-glan.html MikroTik RB260GS, 5 GLAN, 1 SFP, SwOS r2 MikroTik > Switches 32.06 RB260GS 4752224002310 0 https://www.aerial.net/shop/imageslarge/MT-rb260gs_main.jpg RB260GS Is a small SOHO switch. It has five Gigabit Ethernet ports and one SFP cage powered by an Atheros Switch Chip. Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included) It is powered by an operating system designed specifically for MikroTik Switch products - SwOS. https://www.aerial.net/shop/imageslarge/MT-RB260GS_Back.jpg https://www.aerial.net/shop/imageslarge/MT-RB260GS_sfp.jpg https://www.aerial.net/shop/imageslarge/MT-RB260GS_ports.jpg Product code RB260GS Architecture RISC Dimensions 113 x 139 x 28 mm Operating System MikroTik SwOS Size of RAM 0 KB Storage size 128 KB Storage type FLASH Tested ambient temperature -25℃ to +65℃ Max Power consumption 6W PoE in Passive PoE PoE in input Voltage 10v-30v Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 10v-30v 10/100/1000 Ethernet ports 5 SFP DDMI Yes SFP ports 1 https://www.aerial.net/shop/product/176_178/2607/mikrotik-mikrotik-css6101gi7r2sout-netpower-lite.html MikroTik CSS610-1Gi-7R-2S+OUT - netPower Lite 7R reverse PoE switch MikroTik > Switches 105.94 CSS610-1Gi-7R-2S+OUT 4752224000033 2 https://www.aerial.net/shop/imageslarge/MT-CSS610-1Gi-7R-2SplusOUT_main.jpg CSS610-1Gi-7R-2S+OUT - netPower Lite 7R An outdoor reverse PoE switch with Gigabit Ethernet and 10G SFP+ ports. With netPower Lite 7R switch you can forget about expensive GPON base stations and optical splitters. This switch is a part of our GPEN concept – aimed to bring the speed and versatility of fiber networking while using the advantages of Ethernet. It is an easy to deploy, low-cost way for any ISP to deliver the Internet to individual apartments. With this switch you won’t have to worry about power issues, as there are many options. netPower Lite 7R has 7 reverse PoE ports. Depending on your setup, netPower can draw the necessary power even from a single client! Ethernet port 8 can power other PoE capable devices with the same voltage as applied to the unit. There is also a DC jack and a 2-pin terminal for alternative powering. The outdoor enclosure allows you to install this switch in all kinds of environments – from damp attics to elevator shafts and different poles with hose clamps. netPower Lite 7R has a non-blocking throughput of 28 Gbps, switching capacity of 56 Gbps and forwarding rate of 41.7 Mpps. The power supply is NOT included with the product- must be purchased separately. https://www.aerial.net/shop/imageslarge/MT-CSS610-1Gi-7R-2S+OUT_front.jpg https://www.aerial.net/shop/imageslarge/MT-CSS610-1Gi-7R-2S+OUT_rear.jpg https://www.aerial.net/shop/imageslarge/MT-CSS610-1Gi-7R-2S+OUT_enterior.jpg https://www.aerial.net/shop/imageslarge/MT-CSS610-1Gi-7R-2S+OUT_top.jpg Product code CSS610-1Gi-7R-2S+OUT Dimensions 304 x 212 x 71 mm Operating System SwitchOS Storage size 64 KB Storage type FLASH Tested ambient temperature -40°C to 70°C PoE in Passive PoE PoE in input Voltage 12-57 V Number of DC inputs 3 (DC jack, 2-pin terminal, PoE-IN) DC jack input Voltage 12-57 V 2-pin terminal input Voltage 12-57 V Max power consumption 29 W Max power consumption without attachments 7 W FAN count Passive PoE-out ports Ether8 PoE out Passive PoE Max out per port output (input < 30 V) 600 mA Max out per port output (input > 30 V) 450 mA 10/100/1000 Ethernet ports 8 Number of 1G Ethernet ports with Reverse PoE (PoE-in) 7 Number of 1G Ethernet ports with PoE-out 1 SFP+ ports 2 Certification CE, EAC, ROHS https://www.aerial.net/shop/product/176_178/2349/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS112-8P-4S-IN, 8x GLAN with PoE, 4x SFP MikroTik > Switches 159.44 CRS112-8P-4S-IN 4752224002105 1 https://www.aerial.net/shop/imageslarge/MT-CRS112-8P-4S-IN_main.jpg CRS112-8P-4S-IN is an eight Gigabit RJ45 port PoE switch, that offers different power output options: autosensing 802.3af/at PoE/PoE+ and Passive PoE, and four SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps. CRS112-8P-4S-IN is equipped with 12 independent switching ports. 28 V 3.4 A power supply is already included in the box. There is secondary DC jack on the back of the enclosure that supports 48-57 V power supply (not included, can be purchased separately - product codes 48POW (1.46A 70W) and 48V2A96W (2A 96W)). CRS112-8P-4S-IN can power 802.3af/at devices if 48-57 V DC input is used (unit will automatically detect and provide correct power to devices). Max current is 1 A per port if input voltage is 18-28 V, 450 mA if 48-57 V. Total limit is 2.8A@24V and 1.4A@48-57V. PoE-Out is passed over mode B 4,5 (+) and 7,8 (-) pins https://www.aerial.net/shop/imageslarge/MT-CRS112-8P-4S-IN_3d.jpg https://www.aerial.net/shop/imageslarge/MT-CRS112-8P-4S-IN_rear.jpg https://www.aerial.net/shop/imageslarge/MT-CRS112-8P-4S-IN_contents.jpg https://www.aerial.net/shop/product/176_178/1696/mikrotik-mikrotik-crs2121g10s1sin-1-glan.html MikroTik CRS212-1G-10S-1S+IN, 1 GLAN, 10 SFP , 1 10G SFP+, ROS L5 MikroTik > Switches 189.86 CRS212-1G-10S-1S+IN 4752224000194 1 https://www.aerial.net/shop/imageslarge/MT-CRS212-1G-10S-1S+IN_main.jpg CRS212-1G-10S-1S+IN Cloud Router Switch 212-1G-10S-1S+IN is new “small size low cost” member of our CRS series. It comes with one Gigabit Ethernet RJ45 port, ten SFP cages and one 10G SFP+ cage, as well as LCD panel and serial port (RJ45). Product includes indoor desktop case and power supply. Special ears are provided for mounting the unit in rack. Our CRS series combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes https://www.aerial.net/shop/product/176_178/3346/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS310-8G+2S+IN MikroTik > Switches 163.73 CRS310-8G+2S+IN 4752224008367 1 https://www.aerial.net/shop/imageslarge/crs310_8g_2s_in_1.jpg CRS310-8G+2S+IN - Βlazing fast 2.5/10 Gigabit combo can utilize the full potential of RouterOS v7 Metallic-optical Access Cloud Router Switch CRS310-8G+2S+IN is a suitable solution for a desk or a rack in small offices as a solution to upgrade from a gigabit network to 2.5 Gbps. This switch offers 8x 2.5 Gbps LAN with lower speed support, 2x SFP+ slots with multi data rates 1G/2.5 G/10G, USB port and power connector with power supply options from 18 to 57V DC. Computing power is provided by a modern 2-core ARM CPU, 256 MB of RAM, which is complemented by active cooling on the back. Thanks to Marvell's switch chip, it can easily handle the full potential of the RouterOS v7 operating system - VLANs, Jumbo frames, ACL rules, port aggregation and much more. Features: https://www.aerial.net/shop/imageslarge/crs310_8g_2s_in_2.jpg https://www.aerial.net/shop/imageslarge/crs310_8g_2s_in_3.jpg https://www.aerial.net/shop/imageslarge/crs310_8g_2s_in_4.jpg Product code CRS310-8G+2S+IN Architecture ARM 32bit CPU 98DX226S CPU core count 2 CPU nominal frequency 800 MHz Switch chip model 98DX226S Dimensions 200 x 206,1 x 44 RouterOS license 5 Operating System RouterOS v7 / SwitchOS Size of RAM 256 MB Storage size 32 MB Storage type FLASH MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -40°C to 60°C Number of DC inputs 1 (DC jack) DC jack input Voltage 18-57 V Max power consumption 34 W Max power consumption without attachments 21 W Cooling type 1 fan Number of 2.5G Ethernet ports 8 SFP+ ports 2 Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 CPU temperature monitor Yes PCB temperature monitor Yes https://www.aerial.net/shop/product/176_178/2350/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS309-1G-8S+IN, Dual Boot (SwitchOS, RouterOS) MikroTik > Switches 203.32 CRS309-1G-8S+IN 4752224002143 2 https://www.aerial.net/shop/imageslarge/MT-CRS309-1G-8S+IN_main.jpg CRS309-1G-8S+IN is a very compact, yet powerful networking switch. It has eight SFP+ slots, supporting up to 10 Gbit module in each, which results in a total switching capacity of 162 Gbps and total non-blocking throughput of 81 Gbps. The device also has dual-core 800 MHz CPU, 512 MB RAM, a management Ethernet port with PoE power input, RS232 serial port, a grounding terminal and is capable of dual boot (choose which operating system you prefer, RouterOS, or SwOS https://www.aerial.net/shop/imageslarge/MT-CRS309-1G-8S+IN_frontRack.jpg https://www.aerial.net/shop/imageslarge/MT-CRS309-1G-8S+IN_rearRack.jpg https://www.aerial.net/shop/imageslarge/MT-CRS309-1G-8S+IN_rear.jpg https://www.aerial.net/shop/imageslarge/MT-CRS309-1G-8S+IN_contents.jpg Product code CRS309-1G-8S+IN Architecture ARM 32bit CPU 98DX8208 CPU core count 2 CPU nominal frequency 800 MHz Dimensions 272 x 191 x 44 mm License level 5 Operating System RouterOS / SwitchOS Size of RAM 512 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C PoE in 802.3af/at PoE in input Voltage 18-57 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 12-57 V Max power consumption 23 W Max power consumption without attachments 17 W 10/100/1000 Ethernet ports 1 SFP+ ports 8 Serial port RS232 https://www.aerial.net/shop/product/176_178/2395/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS318-1Fi-15Fr-2S-OUT - netPower 15FR reverse POE switch MikroTik > Switches 121.98 CRS318-1Fi-15Fr-2S-OUT 4752224002181 1 https://www.aerial.net/shop/imageslarge/MT-CRS318-1Fi-15Fr-2S-OUT_main.jpg netPower 15FR - An outdoor 18 port switch with 15 reverse PoE ports and SFP. Cut costs, not speed – choose GPEN over GPON! With netPower 15FR switch you can forget about expensive GPON base stations and optical splitters. This switch is a part of our GPEN concept - aimed to bring the speed and versatility of fiber networking while using the advantages of Ethernet. It is an easy to deploy, low-cost way for any ISP to deliver the Internet to individual apartments. You don’t have to worry about power options in the attic or the utility room – netPower 15FR has 15 reverse PoE ports. Depending on your setup, netPower can draw the necessary power even from a single client! Ethernet port 15 can power other PoE capable devices with the same voltage as applied to the unit. There are two SFP ports for fiber connectivity. The outdoor enclosure allows you to install this switch in all kinds of environments – from damp attics to elevator shafts and different poles with hose clamps. netPower 15FR – bringing the cost down and the speed up! netPower 15FR has a non-blocking throughput of 3.6 Gbps, switching capacity of 7.2 Gbps and forwarding rate of 5.4 Mpps. The power supply is NOT included with the product- must be purchased separately. https://www.aerial.net/shop/imageslarge/MT-CRS318-1Fi-15Fr-2S-OUT_front.jpg https://www.aerial.net/shop/imageslarge/MT-CRS318-1Fi-15Fr-2S-OUT_rear.jpg https://www.aerial.net/shop/imageslarge/MT-CRS318-1Fi-15Fr-2S-OUT_contents.jpg Product code CRS318-1Fi-15Fr-2S-OUT Architecture ARM 32bit CPU 98DX224S CPU core count 1 CPU nominal frequency 800 MHz Dimensions 304 x 212 x 71 mm License level 5 Operating System SwOS/RouterOS (Dual boot) Size of RAM 256 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C PoE in Passive PoE PoE in input Voltage 18-57 V (recommended 36-57V) Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 18-57 V Max power consumption 29 W Max power consumption without attachments 10 W PoE-out ports Ether15 PoE out Passive PoE Max out per port output (input<30 V) 0.75 A Max out per port output (input>30 V) 0.5 A Max total out (A) 0.75 A 10/100 Ethernet ports 16 SFP ports 2 CPU temperature monitor Yes Voltage Monitor Yes Certification CE/RED, EAC, ROHS https://www.aerial.net/shop/product/176_178/2987/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS504-4XQ-OUT MikroTik > Switches 673.09 CRS504-4XQ-OUT 4752224007391 0 https://www.aerial.net/shop/imageslarge/CRS504-4XQ-OUT_main.jpg CRS504-4XQ-OUT - 100 Gbps networking, IP66 weatherproof enclosure, 4x 100 Gigabit ports, multiple powering options. CRS504-4XQ-OUT: a versatile, cost-effective, ultra-fast weatherproof switch for all your outdoor needs. CRS504-4XQ-OUT is a versatile, cost-effective, ultra-fast weatherproof switch for all your outdoor needs. This switch has an incredible Marvell Prestera switch chip and is equipped with four 100 Gigabit QSFP28 ports. You can use these ports to connect other 100G devices or connect multiple 25G devices with breakout cable. Each port is connected to four 25 Gigabit lines, so you’ll get up to 16 high-speed fiber interfaces from a single outdoor switch. You can mix and match all kinds of connections on the ports, for example 100 Gigabits on one port, 40 Gigabits on the other, 4x25 Gigabits on the third, and even some 10G or 1G cables on the fourth. CRS504-4XQ-OUT can handle VLANs, ACL, MLAG, Jumbo frames, and even some L3 hardware offloading. The Marvell Prestera switch chip handles most tasks without overloading power consumption – the maximum power consumption is only up to 25W (without attachments). The switch comes in a sturdy, weatherproof IP66-rated enclosure and is protected from harsh environmental conditions. CRS504-4XQ-OUT supports multiple powering options - a standard DC jack, a 2-pin terminal, and 802.3bt PoE-in. https://www.aerial.net/shop/imageslarge/CRS504-4XQ-OUT_ports.jpg https://www.aerial.net/shop/imageslarge/CRS504-4XQ-OUT_rear.jpg https://www.aerial.net/shop/imageslarge/CRS504-4XQ-OUT_door.jpg https://www.aerial.net/shop/imageslarge/CRS504-4XQ-OUT_contents.jpg Product code CRS504-4XQ-OUT Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Switch chip model 98DX4310 RouterOS license 5 Operating System RouterOS v7 Size of RAM 128 MB Storage size 32 MB Storage type FLASH MTBF Approximately 200'000 hours at 25C Tested ambient temperature -40°C to 70°C Number of DC inputs 3 (PoE-IN, 2-pin terminal, DC jack) DC jack input Voltage 36-57 V 2-pin terminal input Voltage 36-57 V Max power consumption 38 W Max power consumption without attachments 25 W Cooling type Passive PoE in 802.3 bt PoE in input Voltage 43-57 V 10/100 Ethernet ports 1 Number of 100G QSFP28 ports 4 Serial console port RJ45 CPU temperature monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Certification CE, EAC, ROHS IP 66 https://www.aerial.net/shop/product/176_178/2069/mikrotik-mikrotik-crs32624g2srm-24xglan-2xsfpcage.html MikroTik CRS326-24G-2S+RM, 24xGLAN, 2xSFP+cage, L5 MikroTik > Switches 159.44 CRS326-24G-2S+RM 4752224002198 2 https://www.aerial.net/shop/imageslarge/MT-CRS326-24G-2S+RM_main.jpg CRS326-24G-2S+RM SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. https://www.aerial.net/shop/imageslarge/MT-CRS326-24G-2S+RM_pcb.jpg https://www.aerial.net/shop/imageslarge/MT-CRS326-24G-2S+RM_contents.jpg Product code CRS326-24G-2S+RM Architecture ARM 32bit CPU 98DX3236A1-BTD4C000 CPU core count 1 CPU nominal frequency 800 MHz Dimensions 440 x 144 x 44 mm License level 5 Operating System RouterOS / SwitchOS Size of RAM 512 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C .. +60°C Max Power consumption 24W PoE in Passive PoE PoE in input Voltage 10-30 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 10-30 V 10/100/1000 Ethernet ports 24 SFP+ ports 2 https://www.aerial.net/shop/product/176_178/3316/mikrotik-mikrotik-cloud-smart-switch.html MikroTik Cloud Smart Switch CSS318-16G-2S+IN MikroTik > Switches 103.80 CSS318-16G-2S+IN 4752224009227 1 https://www.aerial.net/shop/imageslarge/css318_16g_2s_in_1.jpg CSS318-16G-2S+IN - With 16 Gigabit Ethernet ports and 2 SFP+ 10G uplink ports, you get all the connectivity you need without unnecessary bulk. The CSS318-16G-2S+IN is a perfect fit for setups where 24 ports are too many and 8 ports just aren’t enough. Its compact 10-inch form factor and cost-effective design make it the ideal solution for small and medium-sized offices, home networks, or rackmount environments where space and efficiency are key. With 16 Gigabit Ethernet ports and 2 SFP+ 10G uplink ports, you get all the connectivity you need without unnecessary bulk. With its versatile mounting options, the CSS318-16G-2S+ can be installed in 10-inch racks, standard 19-inch racks, or even side-by-side—fitting two switches in a single 1U 19-inch space. Configuration is effortless with MikroTik’s lightweight SwOS. Accessible directly from your web browser, SwOS gives you the core functionality of a managed switch and more: https://www.aerial.net/shop/imageslarge/css318_16g_2s_in_2.jpg https://www.aerial.net/shop/imageslarge/css318_16g_2s_in_3.jpg https://www.aerial.net/shop/imageslarge/css318_16g_2s_in_5.jpg Product code CSS318-16G-2S+IN Switch chip model 98DX2518 Operating System SwOS Storage size 16 MB Storage type FLASH MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -40°C to 70°C Number of AC inputs 1 AC input range 100-240 Frequency (Hz) 50-60 Max power consumption 13 W Max power consumption without attachments 10 W Cooling type Passive 10/100/1000 Ethernet ports 16 SFP+ ports 2 Certification CE, EAC, ROHS IP 20 https://www.aerial.net/shop/product/176_178/3261/mikrotik-mikrotik-crs5204xs16xqrm-cloud-router.html MikroTik CRS520-4XS-16XQ-RM, Cloud Router Switch MikroTik > Switches 1647.93 CRS520-4XS-16XQ-RM 4752224009265 0 https://www.aerial.net/shop/imageslarge/crs520_4xs_16xq_rm_1.jpg CRS520-4XS-16XQ-RM An ultra-fast enterprise switch with extra processing power due to the CCR series CPU & the best price per 100 Gigabit port on the market! CRS520-4XS-16XQ-RM with extra processing power, 4 GB of DDR4 RAM, and the best price per 100 Gigabit Avid CCR users might recognize the powerful quad-core ARM CPU running at 2 GHz, and ask – why would a switch need all that power? Two reasons: 1) CRS520 is more than a switch. You can run OSPF/BGP, out-of-band/management VPNs, ACLs, Jumbo frames and even L3HW Offloaded routing; 2) Future-proofing: as our friends at Marvell keep expanding the capabilities of their spectacular switch-chips, our in-house software team is busy exploring ways to add even more Hardware Offloaded features. You can expect software updates that will take the CRS520 to the next level! And all that without any paywalls or subscriptions. Two hot-swap power supplies and four hot-swap fans for cooling are included. https://www.aerial.net/shop/imageslarge/crs520_4xs_16xq_rm_2.jpg https://www.aerial.net/shop/imageslarge/crs520_4xs_16xq_rm_3.jpg https://www.aerial.net/shop/imageslarge/crs520_4xs_16xq_rm_4.jpg Product code CRS520-4XS-16XQ-RM Architecture ARM 64bit CPU AL52400 CPU core count 4 CPU nominal frequency 2 GHz Switch chip model 98CX8410 RouterOS license 5 Operating System RouterOS v7 Size of RAM 4 GB Storage size 128 MB Storage type NAND MTBF Approximately 200.000 hours at 25°C Tested ambient temperature -20°C to 50°C Number of AC inputs 2 AC input range 100-240 Number of PSU slots 2 Frequency (Hz) 50-60 Max power consumption 150 W Max power consumption without attachments 123 W Cooling type 4 fans Number of 1G/2.5G/5G/10G Ethernet ports 2 Number of 25G SFP28 ports 4 Number of 100G QSFP28 ports 16 Serial console port RJ45 CPU temperature monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Certification CE, EAC, ROHS IP 20 https://www.aerial.net/shop/product/176_178/2352/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS326-24S+2Q+RM MikroTik > Switches 448.37 CRS326-24S+2Q+RM 4752224002211 0 https://www.aerial.net/shop/imageslarge/MT-CRS326-24S+2Q+RM_main.jpg CRS326-24S+2Q+RM is our first product with 40 Gbps QSFP+ ports for remarkably fast and stable fiber connection. If you are working with substantial amount of data – like providing Internet access or maintaining a huge data center – this is the perfect upgrade for your setup. Overall it has two 40 Gbps QSFP+ ports and twenty four 10 Gbps SFP+ ports, which provides total nonblocking throughput of 320 Gbps and switching capacity of 640 Gbps with forwarding rate of 252 Mpps with most common packets. CRS326-24S+2Q+RM is easy to manage – it has a full size USB port for configuration and dual power supply for redundancy – no unexpected downtime, your clients and colleagues will be thankful! You can choose between our legendary feature-packed RouterOS for booting or a simpler, but still powerful SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. https://www.aerial.net/shop/imageslarge/MT-CRS326-24S+2Q+RM_rear.jpg https://www.aerial.net/shop/imageslarge/MT-CRS326-24S+2Q+RM_contents.jpg Serial port RJ45 Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 SFP+ ports 24 Number of 40G QSFP+ ports 2 10/100 Ethernet ports 1 Number of AC inputs 2 AC input range 100-240 Max power consumption 69 W Max power consumption without attachments 42 W Product code CRS326-24S+2Q+RM Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Dimensions 443 x 200 x 44 mm License level 5 Operating System RouterOS or SwitchOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -20°C to 60°C https://www.aerial.net/shop/product/176_178/2393/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS326-24G-2S+IN MikroTik > Switches 156.23 CRS326-24G-2S+IN 4752224006462 1 https://www.aerial.net/shop/imageslarge/MT-CRS326-24G-2S+IN_main.jpg CRS326-24G-2S+IN - 24 Gigabit ports, 2 SFP+ cages and a desktop case – server room power for your home! A home network setup doesn’t have to be a compromise. This compact and quiet switch is packing some serious server room grade features: a pair of 10G SFP+ cages, 512 MB of RAM, 24 Gigabit Ethernet ports and a sufficient built-in CPU that can handle basic home user needs such as firewall, NAT and even some VPN. And it is extremely affordable – we are keeping the price on par with the previous generation desktop switches! Like many other MikroTik switches, CRS326-24G-2S+IN offers the dual boot option that allows you to use either the lightweight SwOS or the advanced RouterOS. The compact and quiet fanless desktop case makes this switch the perfect addition to the best home setups. And it is very easy to transport! But make no mistake – this small switch has all the power and features of its bigger rackmount analogue – the CRS326-24G-2S+RM, nothing has been removed! CRS326-24G-2S+IN provides all the basic functionality for a managed switch, and even more: port-to- port forwarding, MAC filtering, VLAN configuration, traffic mirroring, bandwidth limitation and even adjust some MAC and IP header fields. SFP+ cage supports both 1.25G SFP and 10G SFP+ modules. https://www.aerial.net/shop/imageslarge/MT-CRS326-24G-2S+IN_front.jpg https://www.aerial.net/shop/imageslarge/MT-CRS326-24G-2S+IN_rear.jpg https://www.aerial.net/shop/imageslarge/MT-CRS326-24G-2S+IN_contents.jpg Product code CRS326-24G-2S+IN Architecture ARM 32bit CPU 98DX3236 CPU core count 1 CPU nominal frequency 800 MHz Dimensions 285 x 144 x 44 mm License level 5 Operating System RouterOS / SwitchOS Size of RAM 512 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 60°C PoE in Passive PoE PoE in input Voltage 10-30 V Number of DC inputs 2 (PoE-IN, DC jack) DC jack input Voltage 10-30 V Max power consumption 21 W 10/100/1000 Ethernet ports 24 SFP+ ports 2 Serial port RJ45 Certification CE/RED, EAC, ROHS https://www.aerial.net/shop/product/176_179/1448/mikrotik-mikrotik-rb922uags5hpacdnm-netmetal-5.html MikroTik RB922UAGS-5HPacD-NM, NetMETAL 5 MikroTik > Wireless systems 111.29 RB922UAGS-5HPacD-NM 4752224000996 0 https://www.aerial.net/shop/imageslarge/RB922UAGS-5HPacD-NM_main.jpg NetMetal 5 Dual chain 5GHz integrated 802.11a/n/ac AP/Backbone/CPE with an additional miniPCI-e slot, 2xRPSMA connectors, Gigabit Ethernet, waterproof metal enclosure This NetMetal version is equipped with a miniPCI-express slot a SIM slot for 3G/4G device or additional wireless card, a high power 2x2 dual chain 802.11ac wireless and two RP-SMA connectors for external antennas The NetMetal is a 802.11ac wireless device in a waterproof metal enclosure (IP54). Its rugged design is made to withstand the toughest conditions, but at the same time is easy to use and can be opened and closed with one hand. The solid aluminum enclosure also works as a reliable heat-sink for its high output power radio. The NetMetal is equipped with powerful 720Mhz CPU, 128MB RAM, one Gigabit Ethernet port, 802.11ac wireless, one SFP cage, USB, RP-SMA connectors for external antennas and RouterOS L4 license. https://www.aerial.net/shop/imageslarge/RB922UAGS-5HPacD-NM_back.jpg https://www.aerial.net/shop/imageslarge/RB922UAGS-5HPacD-NM_open.jpg https://www.aerial.net/shop/imageslarge/RB922UAGS-5HPacD-NM_side.jpg https://www.aerial.net/shop/imageslarge/RB922UAGS-5HPacD-NM_contents.jpg Product code RB922UAGS-5HPacD-NM Architecture MIPSBE CPU QCA9557 CPU core count 1 CPU nominal frequency 720 MHz Dimensions 143x247x48mm (PCB) RouterOS license 4 Operating System RouterOS Size of RAM 128 MB Storage size 128 MB Storage type NAND MTBF (Approximately) 200'000 hours at 25C Tested ambient temperature -40°C to 70°C Number of DC inputs 1 (PoE-IN) Max power consumption 19 W Cooling type Passive PoE in Passive PoE PoE in input Voltage 8-30 V Wireless 5 GHz Max data rate 867 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac Wireless 5 GHz chip model QCA9882 Wireless 5 GHz generation Wi-Fi 5 10/100/1000 Ethernet ports 1 SFP DDMI yes SFP ports 1 Number of SIM slots 1 Modem (Mini SIM) MiniPCI-e slots 1 Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 https://www.aerial.net/shop/product/176_179/3169/mikrotik-mikrotik-l11ug5haxdnb-netbox-5.html MikroTik L11UG-5HaxD-NB, NetBox 5 ax MikroTik > Wireless systems 84.53 L11UG-5HaxD-NB 4752224009111 0 https://www.aerial.net/shop/imageslarge/netbox_5_ax_1.jpg NetBox 5 ax - A Wi-Fi 6 upgrade of the popular NetBox 5. AP/CPE/Point-to-point, PoE-in, DC jack, Gigabit Ethernet, outdoor enclosure, Wi-Fi-6 5GHz wireless. NetBox 5 ax is a powerful dual-chain outdoor device that can fill multiple roles in your setups: AP/CPE/Point-to-point. The strong 5 GHz Wi-Fi 6 radio comes with handy RP-SMA connectors. That means you can add a HGO-antenna-OUT and you’ve got yourself an excellent omnidirectional AP… or try the mANT30 PA antenna to create a powerful long-range point-to-point link for distances up to 30 kilometers.* This weatherproof board features a modern Qualcomm Maple CPU based on the ARM architecture, 256 MB of RAM, a USB port for extra storage or other needs, and a Gigabit Ethernet port with PoE-in. We’ve designed the case to make a sysadmins life easier. You can open the case effortlessly with just one hand. At the bottom, concealed behind a protective door, you’ll find exits for Ethernet. Equipped with a mounting loop for easy tower/pole installation, it also offers a separate DIN rail mount. https://www.aerial.net/shop/imageslarge/netbox_5_ax_5.jpg https://www.aerial.net/shop/imageslarge/netbox_5_ax_4.jpg https://www.aerial.net/shop/imageslarge/netbox_5_ax_3.jpg https://www.aerial.net/shop/imageslarge/netbox_5_ax_2.jpg Product code L11UG-5HaxD-NB Architecture ARM CPU IPQ-5010 CPU core count 2 CPU nominal frequency 800 MHz RouterOS license 4 Operating System RouterOS v7 Size of RAM 256 MB Storage size 128 MB Storage type NAND MTBF Approximately 200.000 hours at 25°C Tested ambient temperature -40°C to +70°C Number of DC inputs 1 (PoE-IN) Max power consumption 15 W Max power consumption without attachments 6 W Cooling type Passive PoE in Passive PoE PoE in input Voltage 18-28 V Wireless 5 GHz Max data rate 2400 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac/ax Wireless 5 GHz chip model QCN-6102 Wireless 5 GHz generation Wi-Fi 6 10/100/1000 Ethernet ports 1 Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1.5 PCB temperature monitor Yes Voltage Monitor Yes Beeper Yes Certification CE, FCC, IC, EAC, ROHS IP 54 https://www.aerial.net/shop/product/176_179/2357/mikrotik-mikrotik-rbgroovega52hpacn-omni.html MikroTik RBGrooveGA-52HPacn with OMNI MikroTik > Wireless systems 74.90 RBGrooveGA-52HPacn 4752224003591 0 https://www.aerial.net/shop/imageslarge/MT-RBGrooveGA-52HPacn_main.jpg GrooveA 52 ac Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4GHz or 5GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilise the full benefit of 802.11ac high speed wireless. The Groove A (AP model) comes with Level 4 license and includes a Dual Band 2.4/5GHz Omni directional antenna (6dBi 2.4GHz, 8dBi 5GHz), so you can use the unit right out of the box, or use your own antenna. RBGrooveGA-52HPacn (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations). https://www.aerial.net/shop/imageslarge/MT-RBGrooveGA-52HPacn_front.jpg https://www.aerial.net/shop/imageslarge/MT-RBGrooveGA-52HPacn_mounted.jpg https://www.aerial.net/shop/imageslarge/MT-RBGrooveGA-52HPacn_contents.jpg Product code RBGrooveGA-52HPacn Architecture MIPSBE CPU QCA9556 CPU core count 1 CPU nominal frequency 720 MHz Dimensions 177 x 44 x 44 mm License level 4 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C PoE in Passive PoE PoE in input Voltage 10-30 V Number of DC inputs 1 (PoE-IN) Max power consumption 5 W Wireless 5 GHz/2.4 GHz Max data rate 433 Mbit/s Wireless 5 GHz/2.4 GHz number of chains 1 Wireless 5 GHz/2.4 GHz standards 802.11b/g/n, 802.11a/n/ac Antenna gain dBi for 5 GHz/2.4 GHz 6 Wireless 5 GHz/2.4 GHz chip model QCA9889 Wireless 5 GHz/2.4 GHz generation Wi-Fi 4 10/100/1000 Ethernet ports 1 PCB temperature monitor Yes Voltage Monitor Yes https://www.aerial.net/shop/product/176_179/2132/mikrotik-mikrotik-sxtsq-lite2-10dbi.html MikroTik SXTsq Lite2, 10dBi, 802.11b/g/n, ROS L3, PoE MikroTik > Wireless systems 28.90 RBSXTsq2nD 4752224004581 13 https://www.aerial.net/shop/imageslarge/MT-RBSXTsq2nD_main.jpg SXTsq Lite2 SXTsq Lite2 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point-to-point links or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite2 retains a 10 dBi antenna like the SXT Lite2, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner. The enclosure includes slots for directly attaching a hose clamp mount in three different mounting places, with ability to be mounted on horizontal railings. The device includes one 10/100 Mbit Ethernet port. There is also an easily accessilble grounding connection to protect it against lightning. https://www.aerial.net/shop/imageslarge/MT-RBSXTsq2nD_3d.jpg https://www.aerial.net/shop/imageslarge/MT-RBSXTsq2nD_rear.jpg https://www.aerial.net/shop/imageslarge/MT-RBSXTsq2nD_contents.jpg Product code RBSXTsq2nD Architecture MIPSBE CPU QCA9533 CPU core count 1 CPU nominal frequency 650 MHz Dimensions 129 x 129 x 34 mm License level 3 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C .. +70°C Max Power consumption 5W PoE in Passive PoE PoE in input Voltage 10-30 V Number of DC inputs 1 (PoE-IN) Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 10 Wireless 2.4 GHz chip model QCA9533 10/100 Ethernet ports 1 https://www.aerial.net/shop/product/176_179/2227/mikrotik-mikrotik-rb911g2hpnd12s-mantbox-2.html MikroTik RB911G-2HPnD-12S, mANTBox 2 12s - L4 MikroTik > Wireless systems 74.90 RB911G-2HPnD-12S 4752224002853 0 https://www.aerial.net/shop/imageslarge/MT-RB911G-2HPnD-12S_main.jpg mANTBox 2 12s - 2.4GHz 120° 12dBi dual polarization sector Integrated antenna with 600Mhz CPU, 64MB RAM, Gigabit Ethernet, PSU and PoE mANTBox 2 12s is long range 12dbi 120° integrated Base Station for 2.4 GHz. The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB911 device, the mANTBox comes ready to use with everything included. The device uses a high speed 600 MHz CPU, comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power. https://www.aerial.net/shop/imageslarge/MT-RB911G-2HPnD-12S_rear.jpg https://www.aerial.net/shop/imageslarge/MT-RB911G-2HPnD-12S_pcbAnt.jpg https://www.aerial.net/shop/imageslarge/MT-RB911G-2HPnD-12S_ports.jpg https://www.aerial.net/shop/imageslarge/MT-RB911G-2HPnD-12S_contents.jpg Product code RB911G-2HPnD-12S CPU AR9342 CPU core count 1 CPU nominal frequency 600 MHz Dimensions 140 x 348 x 82 mm License level 4 Operating System RouterOS Size of RAM 64 MB Storage size 128 MB Storage type NAND Tested ambient temperature -40°C to 70°C PoE in Passive PoE PoE in input Voltage 10-28 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 8-30 V Max power consumption 11 W Antenna gain dBi for 2.4 GHz 12 Wireless 2.4 GHz standards 802.11b/g/n Wi-Fi generation 4 Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz chip model AR9342 10/100/1000 Ethernet ports 1 https://www.aerial.net/shop/product/176_179/3386/mikrotik-mikrotik-sxtsq5axd-sxtsq-5.html MikroTik SXTsq-5axD, SXTsq 5 ax, L4, Wi-Fi 6 MikroTik > Wireless systems 48.15 SXTsq-5axD 0 https://www.aerial.net/shop/imageslarge/SXTsq-5axD_1.jpg https://www.aerial.net/shop/imageslarge/SXTsq-5axD_2.jpg https://www.aerial.net/shop/imageslarge/SXTsq-5axD_3.jpg https://www.aerial.net/shop/imageslarge/SXTsq-5axD_4.jpg Product code SXTsq-5axD CPU Dual-Core IPQ-5010 800 MHz CPU architecture ARM 64bit Size of RAM 256 MB RAM type DDR3L Storage 128 MB, NAND Number of 1G Ethernet ports 1 Wireless interface model QCN-6102 Wireless 5 GHz 802.11a/n/ac/ax Antenna gain 16 dBi Dimensions 129 x 129 x 34 mm Operating system RouterOS v7, License level 4 Operating temperature -40°C to +70°C DC input PoE-In Input Voltage 12-28 V Power adapter nominal voltage 24 V Power adapter nominal current 0.38 A PoE-In Passive PoE Max power consumption 6 W https://www.aerial.net/shop/product/176_179/2849/mikrotik-mikrotik-routerboard-rblhg5nd3-lhg.html MikroTik RouterBOARD RBLHG-5nD-3, LHG 5 Tripack, 3 pack MikroTik > Wireless systems 154.05 RBLHG5kit 4752224003867 0 https://www.aerial.net/shop/imageslarge/MT-RBLHG-5nD-3_main.jpg RBLHG-5nD-3 pack The LHG is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables. RBLHG-5nD (International) supports 5150MHz-5875MHz range. https://www.aerial.net/shop/product/176_179/1477/mikrotik-mikrotik-sxt-sa5-ac.html MikroTik SXT SA5 ac, 802.11a/n/ac, 1300mW RF output, ROS L4 MikroTik > Wireless systems 88.81 RBSXTG-5HPacD-SA 4752224004499 1 https://www.aerial.net/shop/imageslarge/MT-RBSXTG-5HPacD_main.jpg SXT SA5 ac The new AC standard is here, with up to 866Mbit over the air datarate, 256-QAM modulation, and 80MHz channels. 802.11ac opens up new possibilities and speeds never possible before. The SXT ac is a new member in our 802.11ac product lineup, currently two models are available — with regular 28 degree antenna, and the SA model with a 90 wide beam- width sector antenna. Also supports 802.11a/n mode and is compatible with all legacy RouterBOARD devices, including Nstream and Nv2 protocols. Both devices come with Gigabit Ethernet. New products are backwards compatible- for example, you can replace your 5GHz 802.11an legacy Access Point with new 802.11ac product and your existing customers will still be able to connect to it. https://www.aerial.net/shop/product/176_179/2082/mikrotik-mikrotik-sxtsq-5-ac16dbi.html MikroTik SXTsq 5 ac,16dBi, 802.11ac, ROS L3, PoE MikroTik > Wireless systems 48.15 RBSXTsqG-5acD 4752224004697 2 https://www.aerial.net/shop/imageslarge/RBSXTsqG-5acD_main.jpg The SXTsq 5 ac is a compact and lightweight outdoor 5Ghz 802.11ac wireless device with an integrated antenna, perfect for point-to-point links or as a CPE unit. The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11ac protocol provides. The SXTsq 5 ac retains a 16 dBi antenna like the SXT 5 ac, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner. The SXTsq 5 ac supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations). https://www.aerial.net/shop/imageslarge/RBSXTsqG-5acD_rear.jpg https://www.aerial.net/shop/imageslarge/RBSXTsqG-5acD_carton.jpg https://www.aerial.net/shop/imageslarge/RBSXTsqG-5acD_retail.jpg https://www.aerial.net/shop/imageslarge/RBSXTsqG-5acD_contents.jpg Product code RBSXTsqG-5acD Architecture ARM 32bit CPU IPQ-4018 CPU core count 4 CPU nominal frequency 716 MHz Dimensions 129 x 129 x 34 mm License level 3 Operating System RouterOS Size of RAM 256 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C Max Power consumption 7W PoE in Passive PoE PoE in input Voltage 10-30 V Number of DC inputs 1 (PoE-IN) Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11ac Antenna gain dBi for 5 GHz 16 Wireless 5 GHz chip model IPQ-4018 10/100/1000 Ethernet ports 1 https://www.aerial.net/shop/product/176_179/2359/mikrotik-mikrotik-rbomnitikg5hacd-omnitik-5.html MikroTik RBOmniTikG-5HacD, OmniTIK 5 ac MikroTik > Wireless systems 90.97 RBOmniTikG-5HacD 4752224004383 2 https://www.aerial.net/shop/imageslarge/MT-RBOmniTikG-5HacD_main.jpg OmniTIK 5 ac We are glad to introduce a significant upgrade to our popular OmniTIK 5GHz access points! OmniTIK 5 ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit. OmniTIK 5 ac supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations). https://www.aerial.net/shop/imageslarge/MT-RBOmniTikG-5HacD_rear.jpg https://www.aerial.net/shop/imageslarge/MT-RBOmniTikG-5HacD_ports.jpg https://www.aerial.net/shop/imageslarge/MT-RBOmniTikG-5HacD_3d.jpg https://www.aerial.net/shop/imageslarge/MT-RBOmniTikG-5HacD_components.jpg Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 10/100/1000 Ethernet ports 5 AC speed AC1900 Wireless 5 GHz Max data rate 867 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 7.5 Wireless 5 GHz chip model QCA9892 Wireless 5 GHz generation Wi-Fi 5 PoE in Passive PoE PoE in input Voltage 10-57 V Number of DC inputs 1 (PoE-IN) Max power consumption 14 W Product code RBOmniTikG-5HacD Architecture MIPSBE CPU QCA9557 CPU core count 1 CPU nominal frequency 720 MHz Dimensions 416 x 129 x 58 mm License level 4 Operating System RouterOS Size of RAM 128 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C https://www.aerial.net/shop/product/176_179/2016/mikrotik-mikrotik-sxtsq-lite5-16dbi.html MikroTik SXTsq Lite5, 16dBi, 802.11a/n, ROS L3, PoE MikroTik > Wireless systems 35.12 RBSXTsq5nD 4752224004659 5 https://www.aerial.net/shop/imageslarge/MT-RBSXTsq5nD_main.jpg The SXTsq Lite5 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point to point links of up to 12 kilometers or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite5 retains a 16dBi antenna like the SXT Lite5, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner. TheSXTsq Lite5supports 5150MHz-5875MHz frequency range. https://www.aerial.net/shop/imageslarge/MT-RBSXTsq5nD_3d.jpg https://www.aerial.net/shop/imageslarge/MT-RBSXTsq5nD_front.jpg https://www.aerial.net/shop/imageslarge/MT-RBSXTsq5nD_rear.jpg https://www.aerial.net/shop/imageslarge/MT-RBSXTsq5nD_contents.jpg Product code RBSXTsq5nD 10/100 Ethernet ports 1 Antenna gain 16 CPU AR9344 CPU core count 1 CPU nominal frequency 600 MHz Dimensions 129x129x34mm License level 3 Max Power consumption 6W Number of chains 2 Operating System RouterOS PoE in Passive PoE Size of RAM 64 MB Storage size 16 MB Storage type FLASH Supported input voltage 10 V - 30 V Tested ambient temperature -40°C .. +70°C Wireless chip model AR9344 Wireless standards 802.11a/n https://www.aerial.net/shop/product/176_179/2921/mikrotik-mikrotik-routerboard-rblhgg5acdxl4pack-lhg.html MikroTik RouterBOARD RBLHGG-5acD-XL4pack, LHG XL 5 ac 4pack, L3 MikroTik > Wireless systems 362.16 RBLHGG-5acD-XL4pack 4752224008497 1 https://www.aerial.net/shop/imageslarge/RBLHGG-5acD-XL4pack.jpg LHG XL 5 ac 4-pack Dual chain Long Range 27dBi 5GHz CPE/Point-to-Point Integrated Antenna with AC support and Gigabit Ethernet The LHG XL 5 ac is Long Range 5GHz 802.11ac wireless device with an integrated dual polarization 27 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol. The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11ac protocol provides. LHG XL 5 ac supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations). https://www.aerial.net/shop/imageslarge/MT-RBLHGG-5acD_front.jpg https://www.aerial.net/shop/imageslarge/MT-RBLHGG-5acD_3d.jpg https://www.aerial.net/shop/imageslarge/MT-RBLHGG-5acD_contents.jpg Product code RBLHGG-5acD-XL Architecture ARM 32bit CPU IPQ-4018 CPU core count 4 CPU nominal frequency 716 MHz Dimensions Ø 550 x 245 mm License level 3 Operating System RouterOS Size of RAM 256 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C .. +70°C Max Power consumption 8W PoE in Passive PoE PoE in input Voltage 10-30 V Number of DC inputs 1 (PoE-IN) Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 27 Wireless 5 GHz chip model IPQ-4018 10/100/1000 Ethernet ports 1 https://www.aerial.net/shop/product/176_179/3168/mikrotik-mikrotik-l22ugs5haxd2haxd15s-mantbox-ax.html MikroTik L22UGS-5HaxD2HaxD-15S, mANTBox ax 15s MikroTik > Wireless systems 135.91 L22UGS-5HaxD2HaxD-15S 4752224009142 1 https://www.aerial.net/shop/imageslarge/mantbox_ax_15s_1.jpg mANTBox ax 15s can provide unparalleled wireless point-to-multipoint connectivity for a vast variety of devices over a distance of 20 kilometers! Our latest 802.11ax Wi-Fi 6 dual-band radios and powerful built-in sector antennas will take your signal stability, speed, and responsiveness to the next level! There’s a Gigabit Ethernet port with PoE-in and an SFP port with 2.5 Gigabit support for extra fast fiber uplinks. Upgrading your setup to Wi-Fi 6 offers multiple benefits: Speed: we’ve seen up to 40% higher speed in the 5 GHz spectrum and up to 90% higher speed in the 2.4 GHz spectrum. Security: WPA3 encryption and management frame protection prevent all sorts of attacks, like bruteforcing and WPA2 handshakecapture deauthentication attacks Reliability: seamless fast transition (roaming) enables smooth, non-stop signal when you have to switch between access points. Also, Wi-Fi 6 ensures a fair traffic distribution if the connection is shared by a large number of users. Energy efficiency: features like Target Wake Time reduce power consumption in the long run. https://www.aerial.net/shop/imageslarge/mantbox_ax_15s_4.jpg https://www.aerial.net/shop/imageslarge/mantbox_ax_15s_3.jpg https://www.aerial.net/shop/imageslarge/mantbox_ax_15s_2.jpg Product code L22UGS-5HaxD2HaxD-15S Architecture ARM 64bit CPU IPQ-5010 CPU core count 2 CPU nominal frequency 800 MHz RouterOS license 4 Operating System RouterOS v7 Size of RAM 256 MB Storage size 128 MB Storage type NAND MTBF Approximately 200.000 hours at 25°C Tested ambient temperature -40°C to 70°C Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 12-28 V Max power consumption 21 W Max power consumption without attachments 11 W Cooling type Passive PoE in Passive PoE PoE in input Voltage 18-28 V Wireless 2.4 GHz Max data rate 574 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n/ax Antenna gain dBi for 2.4 GHz 12 Wireless 2.4 GHz chip model IPQ-5010 Wireless 2.4 GHz generation Wi-Fi 6 Wireless 5 GHz Max data rate 2400 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac/ax Antenna gain dBi for 5 GHz 15 Wireless 5 GHz chip model QCN-6102 Wireless 5 GHz generation Wi-Fi 6 10/100/1000 Ethernet ports 1 SFP ports 1 (2.5G supported) Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1.5 PCB temperature monitor Yes Voltage Monitor Yes Beeper Yes Certification CE, FCC, IC, EAC, ROHS IP 55 https://www.aerial.net/shop/product/176_179/2149/mikrotik-mikrotik-rbldf2nd-ldf-2.html MikroTik RBLDF-2nD, LDF 2, ROS L3, PoE MikroTik > Wireless systems 31.19 RBLDF-2nD 4752224003638 2 https://www.aerial.net/shop/imageslarge/MT-RBLDF-2nD_main.jpg LDF 2 Dual chain 2.4GHz system for long distance links with satellite offset dish antennas The LDF (Lite dish feed) is an outdoor wireless system with a built in antenna, meant to be installed on satellite offset dish antennas. The dish will act as a reflector, amplifying the signal. This means you can use any available satellite TV dish with an offset mount to quickly deploy powerful long range wireless links. The offset mount is universal at 40 mm diameter, and the LDF can easily be placed inside it. Since the LDF itself is a tiny little package, it makes shipping and deployment simple and low cost. Using large enough dishes, it is possible to obtain antenna amplification of 30 dBi or more. All it takes is to find a spare satellite dish with an offset mount, and put your LDF device. The device comes preinstalled with RouterOS and is ready to use. https://www.aerial.net/shop/imageslarge/MT-RBLDF-2nD_feedhorn.jpg https://www.aerial.net/shop/imageslarge/MT-RBLDF-2nD_dish.jpg https://www.aerial.net/shop/imageslarge/MT-RBLDF-2nD_rear.jpg Product code RBLDF-2nD Architecture MIPSBE CPU QCA9533 CPU core count 1 CPU nominal frequency 650 MHz Dimensions 84mm x 84mm x 115mm License level 3 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C .. +70°C Max Power consumption 7W PoE in Passive PoE PoE in input Voltage 10-28 V Number of DC inputs 1 (PoE-IN) Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 10 Wireless 2.4 GHz chip model QCA9533 10/100 Ethernet ports 1 https://www.aerial.net/shop/product/176_179/1704/mikrotik-mikrotik-rb911g5hpndqrt-qrt-5.html MikroTik RB911G-5HPnD-QRT, QRT 5 MikroTik > Wireless systems 126.28 RB911G-5HPnD-QRT 4752224000569 0 https://www.aerial.net/shop/imageslarge/MT-RB911G-5HPacD-QRT_main.jpg QRT 5 The RB911G-5HPnD-QRT is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 24dBi antenna and a high power 5GHz wireless transmitter. Inside is the high power RB911 dual chain wireless device (see separate brochure), with high performance, high output power wireless transmitter. It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11n high speed wireless. Easy to use and quick to deploy, QRT is ideal for point to point links. https://www.aerial.net/shop/imageslarge/MT-RB911G-5HPnD-QRT_back.jpg https://www.aerial.net/shop/imageslarge/RB911G-5HPnD-QRT_contents.jpg https://www.aerial.net/shop/product/176_179/1363/mikrotik-mikrotik-basebox-5-80211an.html MikroTik BaseBox 5, 802.11a/n, ROS L4 MikroTik > Wireless systems 66.35 RB912UAG-5HPnD-OUT 4752224000736 0 https://www.aerial.net/shop/imageslarge/MT-RB912UAG-5HPnD-OUT_main.jpg BaseBox 5 The RB912 in an outdoor enclosure, fit with two RPSMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the RB912 miniPCIe slot for one more wireless interface to make a dual band device. The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door. Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit. https://www.aerial.net/shop/product/176_179/2361/mikrotik-mikrotik-rbomnitikpg5hacd-omnitik-5.html MikroTik RBOmniTikPG-5HacD, OmniTIK 5 POE ac MikroTik > Wireless systems 105.94 RBOmniTikPG-5HacD 4752224004420 2 https://www.aerial.net/shop/imageslarge/MT-RBOmniTikPG-5HacD_main.jpg OmniTIK 5 PoE ac We are glad to introduce a significant upgrade to our popular OmniTIK 5GHz access points! OmniTIK 5 PoE ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit. It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power af/at mode B (4,5+)(7,8-) compatible devices, if 48-57 input voltage is used. OmniTIK 5 PoE ac supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations). https://www.aerial.net/shop/imageslarge/MT-RBOmniTikPG-5HacD_rear.jpg https://www.aerial.net/shop/imageslarge/MT-RBOmniTikPG-5HacD_mounted.jpg https://www.aerial.net/shop/imageslarge/MT-RBOmniTikPG-5HacD_ports.jpg https://www.aerial.net/shop/imageslarge/MT-RBOmniTikPG-5HacD_contents.jpg PCB temperature monitor Yes Voltage Monitor Yes Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 10/100/1000 Ethernet ports 5 Wireless 5 GHz Max data rate 867 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 7.5 Wireless 5 GHz chip model QCA9892 Wireless 5 GHz generation Wi-Fi 5 PoE in Passive PoE PoE in input Voltage 12-57 V PoE out 802.3af/at PoE-out ports Ether2-Ether5 Number of DC inputs 1 (PoE-IN) Max out per port output (input > 30 V) 450 mA Max out per port output (input < 30 V) 1 A Max total out (A) 2 A Max power consumption 66 W Max power consumption without attachments 18 W Product code RBOmniTikPG-5HacD Architecture MIPSBE CPU QCA9557 CPU core count 1 CPU nominal frequency 720 MHz Dimensions 416 x 129 x 58 mm License level 4 Operating System RouterOS Size of RAM 128 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C https://www.aerial.net/shop/product/176_179/2360/mikrotik-mikrotik-rbmetalg52shpacn.html MikroTik RBMetalG-52SHPacn with ΟΜΝΙ MikroTik > Wireless systems 88.81 RBMetalG-52SHPacn 4752224004338 0 https://www.aerial.net/shop/imageslarge/MT-RBMetalG-52SHPacn_main.jpg Metal 52 ac Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4GHz or 5GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilize the full benefit of 802.11ac high speed wireless. The Metal 52 ac supports 2.4GHz, 5GHz and all the legacy wireless modes as well (802.11 b/g/n for 2.4GHz and 802.11 a/n/ac for 5GHz). RBMetalG-52SHPacn supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations). https://www.aerial.net/shop/imageslarge/MT-RBMetalG-52SHPacn_3d.jpg https://www.aerial.net/shop/imageslarge/MT-RBMetalG-52SHPacn_side.jpg https://www.aerial.net/shop/imageslarge/MT-RBMetalG-52SHPacn_mounted.jpg https://www.aerial.net/shop/imageslarge/MT-RBMetalG-52SHPacn_components.jpg Product code RBMetalG-52SHPacn Architecture MIPSBE CPU QCA9556 CPU core count 1 CPU nominal frequency 720 MHz Dimensions 215x60x38mm License level 4 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C PoE in Passive PoE PoE in input Voltage 10-30 V Number of DC inputs 1 (PoE-IN) Max power consumption 11 W AC speed AC750 Wireless 2.4 GHz/5 GHz Max data rate 433 Mbit/s Wireless 2.4 GHz/5 GHz number of chains 1 Wireless 2.4 GHz/5 GHz standards 802.11a/n/ac, 802.11b/g/n Antenna gain dBi for 2.4 GHz/5 GHz 6 Wireless 2.4 GHz/5 GHz chip model QCA9889 Wireless 2.4 GHz/5 GHz generation Wi-Fi 5 10/100/1000 Ethernet ports 1 PCB temperature monitor Yes Voltage Monitor Yes https://www.aerial.net/shop/product/176_179/3270/mikrotik-mikrotik-routerboard-rblhg5hpndxl4pack-lhg.html MikroTik RouterBOARD RBLHG-5HPnD-XL4pack, LHG XL HP5 4pack MikroTik > Wireless systems 301.19 RBLHG-5HPnD-XL4pack 4752224003782 2 https://www.aerial.net/shop/imageslarge/RBLHG-5HPnD-XL4pack_1.jpg LHG XL HP5 The LHG XL HP5 is a 5GHz 802.11 a/n wireless device with an integrated dual polarization 27 dBi grid antenna and 630mW TX output power. Designed to reach up to 40km in point-to-point setups at full speed. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables. LHG XL HP5 supports 5150MHz-5875MHz range. https://www.aerial.net/shop/imageslarge/RBLHG-5HPnD-XL4pack_2.jpg https://www.aerial.net/shop/imageslarge/RBLHG-5HPnD-XL4pack_3.jpg https://www.aerial.net/shop/imageslarge/RBLHG-5HPnD-XL4pack_4.jpg https://www.aerial.net/shop/imageslarge/RBLHG-5HPnD-XL4pack_5.jpg Licence level 3 CPU nominal frequency 600 MHz Size of RAM 64 MB Storage type Flash Storage size 16 MB 10/100 Ethernet ports 1 Wireless Built-in 5 GHz 802.11a/n, dual-chain Wireless chip model AR9344 Operating frequency 5150 - 5875 MHz Antenna gain 27.5 +/- 0.5 dBi Antenna beam width 6.4° PoE in Yes - Passive PoE Supported input voltage 10 V - 28 V Wind Survivability 205 km/h Wind Loading 186N @ 205 km/h Cross polar 21 dBi Port to port isolation 20 dB Front to back ratio 25 dB Operating Temperature -40°C to 70°C Operating Humidity 5 to 95% noncondensing Shock and Vibration ETSI300-019-1.4 ETSI specification EN 302 326 DN2 Dimensions Unit: 550 x 245 mm Package: 585 x 595 x 138 mm Weight Unit: 945 g Package: 2.99 kg Max Power consumption 7 W https://www.aerial.net/shop/product/176_179/2150/mikrotik-mikrotik-rbldf5nd-ldf-5.html MikroTik RBLDF-5nD, LDF 5, ROS L3, PoE MikroTik > Wireless systems 35.31 RBLDF-5nD 4752224003669 1 https://www.aerial.net/shop/imageslarge/MT-RBLDF-5nD_main.jpg LDF 5 Dual chain 5GHz system for long distance links with satellite offset dish antennas The LDF (Lite dish feed) is an outdoor wireless system with a built in antenna, meant to be installed on satellite offset dish antennas. The dish will act as a reflector, amplifying the signal. This means you can use any available satellite TV dish with an offset mount to quickly deploy powerful long range wireless links. The offset mount is universal at 40 mm diameter, and the LDF can easily be placed inside it. Since the LDF itself is a tiny little package, it makes shipping and deployment simple and low cost. Using large enough dishes, it is possible to obtain antenna amplification of 33 dBi or more. All it takes is to find a spare satellite dish with an offset mount, and put your LDF device. The device comes preinstalled with RouterOS and is ready to use. https://www.aerial.net/shop/imageslarge/MT-RBLDF-5nD_feedhorn.jpg https://www.aerial.net/shop/imageslarge/MT-RBLDF-5nD_dish.jpg https://www.aerial.net/shop/imageslarge/MT-RBLDF-5nD_rear.jpg Product code RBLDF-5nD Architecture MIPSBE CPU AR9344 CPU core count 1 CPU nominal frequency 600 MHz Dimensions 84x84x115mm License level 3 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C .. +70°C Max Power consumption 6W PoE in Passive PoE PoE in input Voltage 10-30 V Number of DC inputs 1 (PoE-IN) Wireless 5 GHz chains 2 Wireless 5 GHz standards 802.11a/n Antenna gain dBi for 5 GHz 9 Wireless 5 GHz chip model AR9344 10/100 Ethernet ports 1 https://www.aerial.net/shop/product/176_179/1344/mikrotik-mikrotik-groove-52-80211.html MikroTik Groove 52, 802.11 a/b/g/n 500mw, ROS L3 MikroTik > Wireless systems 44.51 RBGroove52HPn 4752224001375 2 https://www.aerial.net/shop/imageslarge/RBGroove52HPn_main.jpg Groove 52HPn Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz wireless mode, and high 500mW output power! With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible. It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align. https://www.aerial.net/shop/imageslarge/RBGroove52HPn_cover.jpg https://www.aerial.net/shop/imageslarge/RBGroove52HPn_port.jpg https://www.aerial.net/shop/imageslarge/RBGroove52HPn_connector.jpg https://www.aerial.net/shop/imageslarge/RBGroove52HPn_contents.jpg https://www.aerial.net/shop/product/176_179/1436/mikrotik-mikrotik-groovea-52-80211.html MikroTik GrooveA 52, 802.11 a/b/g/n 500mw, ROS L4 MikroTik > Wireless systems 58.86 RBGrooveA-52HPn 4752224001412 1 https://www.aerial.net/shop/imageslarge/MT-RBGrooveA-52HPn_main.jpg GrooveA 52HPn Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz wireless mode, and high 500mW output power! GrooveA has also supports AP mode. With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible! NEW- now comes packaged with a 2GHz only, 6dBi Omni antena! https://www.aerial.net/shop/imageslarge/MT-RBGrooveA-52HPn _front.jpg https://www.aerial.net/shop/imageslarge/MT-RBGrooveA-52HPn_mounted.jpg https://www.aerial.net/shop/imageslarge/MT-RBGrooveA-52HPn_contents.jpg https://www.aerial.net/shop/product/176_181/2608/mikrotik-mikrotik-rbd53ig5hacd2hnd-hap-ac.html MikroTik RBD53iG-5HacD2HnDμ hAP ac³ MikroTik > SOHO wireless 82.39 RBD53iG-5HacD2HnD 4752224006981 3 https://www.aerial.net/shop/imageslarge/MT-RBD53iG-5HacD2HnD_main.jpg RBD53iG-5HacD2HnD - hAP ac³ Forget about endless searching for the perfect router and scrolling through an eternity of reviews and specifications! We have created a single affordable home access point that has all the features you might need for years to come. Is your old router struggling to reach every corner of your home? Well, forget about that! We have included external high gain wireless antennas with outstanding coverage. Only strong and stable wireless connection in every room from now on! With 5 Gigabit Ethernet ports, 256 MB of RAM and quad-core CPU, hAP ac3 can satisfy even the biggest and most demanding households. With PoE support, it can power or be powered by other devices. There is a 128 MB NAND and a full-size USB port that you can use to add extra storage. The new enclosure allows mounting the device vertically or horizontally. A wall mount set is also included. https://www.aerial.net/shop/imageslarge/MT-RBD53iG-5HacD2HnD_side.jpg https://www.aerial.net/shop/imageslarge/MT-RBD53iG-5HacD2HnD_top.jpg https://www.aerial.net/shop/imageslarge/MT-RBD53iG-5HacD2HnD_rear.jpg https://www.aerial.net/shop/imageslarge/MT-RBD53iG-5HacD2HnD_contents.jpg Product code RBD53iG-5HacD2HnD Architecture ARM 32bit CPU IPQ-4019 CPU core count 4 CPU nominal frequency 716 MHz Dimensions 251 x 129 x 39 mm RouterOS license 4 Operating System RouterOS Size of RAM 256 MB Storage size 128 MB Storage type NAND Tested ambient temperature -40°C to 70°C Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 3 Wireless 2.4 GHz chip model IPQ-4019 Wireless 2.4 GHz generation Wi-Fi 4 Wireless 5 GHz Max data rate 867 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 5.5 Wireless 5 GHz chip model IPQ-4019 Wireless 5 GHz generation Wi-Fi 5 AC speed AC1200 10/100/1000 Ethernet ports 5 Number of 1G Ethernet ports with PoE-out 1 Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 PoE in Passive PoE PoE in input Voltage 18-28 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 12-28 V Max power consumption 30 W Max power consumption without attachments 12 W FAN count Passive PoE-out ports Ether5 PoE out Passive PoE Max out per port output (input < 30 V) 0.5 A Max total out (A) 0.5 A Certification CE, FCC, IC, EAC, ROHS Mode button Yes https://www.aerial.net/shop/product/176_181/2001/mikrotik-mikrotik-rb9412nd-hap-lite.html MikroTik RB941-2nD, hAP lite MikroTik > SOHO wireless 18.94 RB941-2nD 4752224003126 27 https://www.aerial.net/shop/imageslarge/RB941-2nD_1.jpg hAP lite classic The home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office. It supports button triggered WPS and can also be told to change to cAP mode and join a CAPsMAN centrally managed network by the push of a button. Of course, the device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others. The hAP lite is equipped with a powerful 650MHz CPU, 32MB RAM, dual chain 2.4GHz onboard wireless, four Fast Ethernet ports and a RouterOS L4 license. USB power supply is included. https://www.aerial.net/shop/imageslarge/RB941-2nD_2.jpg https://www.aerial.net/shop/imageslarge/RB941-2nD_3.jpg https://www.aerial.net/shop/imageslarge/RB941-2nD_4.jpg https://www.aerial.net/shop/imageslarge/RB941-2nD_5.jpg Product code RB941-2nD 10/100 Ethernet ports 4 Antenna gain 1.5 CPU QCA9533 CPU core count 1 CPU nominal frequency 650 MHz License level 4 Max Power consumption 3.5W Number of chains 2 Operating System RouterOS Power Jack 1 Size of RAM 32 MB Storage size 16 MB Storage type FLASH Supported input voltage 5 V - 5 V Tested ambient temperature -20°C + 70°C Wireless chip model QCA9533 Wireless standards 802.11b/g/n https://www.aerial.net/shop/product/176_181/2367/mikrotik-mikrotik-rbd25g5hpacqd2hpnd-audience.html MikroTik RBD25G-5HPacQD2HPnD, Audience MikroTik > SOHO wireless 126.28 RBD25G-5HPacQD2HPnD 4752224003478 0 https://www.aerial.net/shop/imageslarge/MT-RBD25G-5HPacQD2HPnD_main.jpg Audience - Tri-band (one 2.4 GHz & two 5 GHz) home access point with meshing technology Wi-Fi has to be fast, reliable, easy to manage, it must reach every room and every corner. That is exactly what Audience devices can deliver in grand style – even in the biggest houses! Audience is a tri-band (one 2.4 GHz & two 5 GHz) home access point with meshing technology. If you need Wi-Fi in a huge building with all kinds of obstacles, simply add more Audience devices to your network – with a press of a button they will sync seamlessly and create a single Wi-Fi network to cover the whole premises. The initial setup is also very simple – download the iOS or Android MikroTik app, it will connect to the router and guide you through a quick setup process. In some cases a single Audience unit might be able to replace several other routers – in our tests it covered 1858 m² (20000 square feet) easily. It depends on the amount of obstacles, Wi-Fi clients and interference, so results may vary. Dual-chain 2.4 GHz and 5 GHz wireless coverage will solve most interference issues in a crowded environment. For example, you can simultaneously use the 2.4 GHz channel for all your household mobile devices and reserve the 5 GHz channel for your PC or TV. Order your Audience today and start living in the future. The future of easy and elegant networking. https://www.aerial.net/shop/imageslarge/MT-RBD25G-5HPacQD2HPnD_rear.jpg https://www.aerial.net/shop/imageslarge/MT-RBD25G-5HPacQD2HPnD_exploded.jpg https://www.aerial.net/shop/imageslarge/MT-RBD25G-5HPacQD2HPnD_contents.jpg Product code RBD25G-5HPacQD2HPnD Architecture ARM 32bit CPU IPQ-4019 CPU core count 4 CPU nominal frequency 716 MHz Dimensions 100 x 235 x 97 mm License level 4 Size of RAM 256 MB Storage size 128 MB Storage type NAND Tested ambient temperature -40°C to 60°C Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 3.5 Wireless 2.4 GHz chip model IPQ-4019 Wireless 2.4 GHz generation Wi-Fi 4 Wireless 5 GHz Max data rate 867 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 4.5 Wireless 5 GHz chip model IPQ-4019 Wireless 5 GHz generation Wi-Fi 5 Wireless 5 GHz Max data rate 1733 Mbit/s Wireless 5 GHz number of chains 4 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 4.5 Wireless 5 GHz chip model QCA9984 Wireless 5 GHz generation Wi-Fi 5 10/100/1000 Ethernet ports 2 https://www.aerial.net/shop/product/176_181/1975/mikrotik-mikrotik-rbcapl2nd-cap-lite.html MikroTik RBcAPL-2nD, cAP Lite MikroTik > SOHO wireless 21.96 RBcAPL-2nD 4752224003423 14 https://www.aerial.net/shop/imageslarge/MT-RBcAPL-2nD_main.jpg cAP lite The cAP lite is a tiny access point device, perfect for public locations and hospitality businesses like hotels, airports, shopping malls etc. Included with the product are two different casings, which can easily be swapped out, or, if you really like to fit the design with the environment. The cAP lite supports 802.11b/g/n and can be powered by power over ethernet. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. The cAP lite can also be used as a stand alone access point with the full potential of RouterOS. https://www.aerial.net/shop/imageslarge/MT-RBcAPL-2nD_mount.jpg https://www.aerial.net/shop/imageslarge/MT-RBcAPL-2nD_wallmount.jpg https://www.aerial.net/shop/imageslarge/MT-RBcAPL-2nD_contents.jpg Product code RBcAPL-2nD Architecture MIPSBE CPU QCA9533 CPU core count 1 CPU nominal frequency 650 MHz Wall case dimensions 88 x 52 x 20 mm Ceiling case dimensions ⌀88mmx20mm License level 4 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C +70°C Max Power consumption 4W MicroUSB input Voltage 5V PoE in 802.3af/at PoE in input Voltage 10-60 V Number of DC inputs 2 (PoE-IN, MicroUSB) Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 1.5 Wireless 2.4 GHz chip model QCA9533 10/100 Ethernet ports 1 Number of USB ports 1 USB Power Reset Yes USB slot type microUSB type AB https://www.aerial.net/shop/product/176_181/1446/mikrotik-mikrotik-rbcap2nd-cap.html MikroTik RBcAP2nD, cAP MikroTik > SOHO wireless 37.45 RBcAP2nD 4752224001191 5 https://www.aerial.net/shop/imageslarge/MT-RBcAP2nD_main.jpg cAP 2n RouterBOARD cAP-2n (ceiling Access Point) is our first 2.4GHz ceiling AP. cAP-2n supports 802.11b/g/n and can be powered by PoE. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter and even the screws and screw anchors. https://www.aerial.net/shop/imageslarge/MT-RBcAP2nD_front.jpg https://www.aerial.net/shop/imageslarge/MT-RBcAP2nD_contents.jpg CPU AR9331-AL1A 300MHz Memory 32MB SDRAM Boot loader RouterBOOT Ethernet ports One 10/100 USB Port none PoE 12..57V DC Dimensions 185 diameter x 31mm heigh Wireless 2.4GHz 802.11b/g/n Antenna gain 2 DBI Operating System RouterOS Level4 https://www.aerial.net/shop/product/176_181/1958/mikrotik-mikrotik-rbmapl2nd-map-lite.html MikroTik RBmAPL-2nD, mAP Lite MikroTik > SOHO wireless 24.14 RBmAPL-2nD 4752224004321 9 https://www.aerial.net/shop/imageslarge/MT-mAP-Lite_main.jpg mAP lite The mAP lite is our smallest wireless access point. It is barely larger than a matchbox, we even had to use a special Ethernet port to match it’s slim profile. You can carry it anywhere: use as a travel router to extend that hotel internet to all your devices, or as a client device to improve your laptop signal range, the tiny mAP lite will be always with you. It can also serve as a simple configuration tool for your servers, if there is no ethernet on your mobile device. The mAP lite is a dual chain 802.11 b/g/n device and operates in 2GHz. https://www.aerial.net/shop/imageslarge/MT-mAP-Lite_mounted.jpg https://www.aerial.net/shop/imageslarge/MT-mAP-Lite_front.jpg https://www.aerial.net/shop/imageslarge/MT-mAP-Lite_comp.jpg Product code RBmAPL-2nD CPU nominal frequency 650 MHz CPU core count 1 Size of RAM 64 MB 10/100 Ethernet ports 1 Wireless chip model QCA9533 Wireless standards 802.11b/g/n Power Jack 1 Supported input voltage 5 V - 60 V PoE in 802.3at Dimensions 48 x 49 x 11 mm Operating System RouterOS Tested ambient temperature -30°C + 70°C License level 4 Antenna gain DBI 1.5 CPU QCA9533 Max Power consumption 3.5W Number of chains 2 Storage type FLASH Storage size 16 MB https://www.aerial.net/shop/product/176_181/3026/mikrotik-mikrotik-capg5haxd2haxd-cap-ax.html MikroTik cAPG-5HaxD2HaxD, cAP ax MikroTik > SOHO wireless 96.31 cAPGi-5HaxD2HaxD 4752224008473 4 https://www.aerial.net/shop/imageslarge/cAPG-5HaxD2HaxD_main.jpg cAP ax - Modern quad-core CPU, 1GB of RAM, 2x Gigabit Ethernet ports, PoE, Gen 6 802.11ax wireless, PSU – included! With the Generation6 802.11ax wireless standard, the cAP ax access point reaches up to 40% higher speed in the 5 GHz and up to 90% higher speed in the 2.4 GHz spectrum. The ceiling access point is a great way to prevent signal loss in large, crowded areas with many obstacles. The cAP ax is a reliable, flexible and cost-effective solution, offering the most stable and uninterrupted signal. cAP ax features a modern quad-core CPU running at 1.8 GHz, NAND storage, a gigabyte of RAM and the most powerful networking software on the market – RouterOS v7. The cAP ax supports complex firewall rules, IPsec hardware encryption, Wireguard, BGP, advanced routing and multiple remote work VPN tunnels. cAP ax is a great way to make your office network installation and maintenance much easier, as it features PoE-in and PoE-out. You can use cAP ax to power other devices, such as network switches, CCTV cameras, or another cAP ax. The 48V PSU is included, so you can power your IP-cameras or another cAP ax right out of the box. https://www.aerial.net/shop/imageslarge/cAPG-5HaxD2HaxD_3d.jpg https://www.aerial.net/shop/imageslarge/cAPG-5HaxD2HaxD_ports.jpg https://www.aerial.net/shop/imageslarge/cAPG-5HaxD2HaxD_contents.jpg Product code cAPGi-5HaxD2HaxD Architecture ARM 64bit CPU IPQ-6010 CPU core count 4 CPU nominal frequency auto (864 - 1800) MHz Switch chip model IPQ-6010 RouterOS license 4 Operating System RouterOS (v7 only) Size of RAM 1 GB Storage size 128 MB Storage type NAND MTBF Approximately 200.000 hours at 25°C Tested ambient temperature -40°C to 70°C IPsec hardware acceleration Yes Wireless 2.4 GHz Max data rate 574 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11g/n/ax Antenna gain dBi for 2.4 GHz 6 Wireless 2.4 GHz chip model QCN-5022 Wireless 2.4 GHz generation Wi-Fi 6 Wireless 5 GHz Max data rate 1200 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac/ax Antenna gain dBi for 5 GHz 5.5 Wireless 5 GHz chip model QCN-5052 Wireless 5 GHz generation Wi-Fi 6 WiFi speed AX1800 10/100/1000 Ethernet ports 2 Number of 1G Ethernet ports with PoE-out 1 Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 18-57 V Max power consumption 28.2 W Max power consumption without attachments 9 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 18-57 V PoE-out ports Ether2 PoE out Passive PoE up to 57V Max out per port output (input 18-30 V) 600 mA Max out per port output (input 30-57 V) 400 mA Max total out (A) 600 mA Total output current 0.4 Total output power 19.2 Certification CE, FCC, IC, EAC, ROHS IP 20 CPU temperature monitor Yes Mode button Yes https://www.aerial.net/shop/product/176_181/2765/mikrotik-mikrotik-rbcapgi5acd2ndxl-cap-xl.html MikroTik RBcAPGi-5acD2nD-XL, cAP XL ac, ROS L4 MikroTik > SOHO wireless 74.90 RBcAPGi-5acD2nD-XL 4752224007278 9 https://www.aerial.net/shop/imageslarge/RBcAPGi-5acD2nD-XL_main.jpg cAP XL ac - The ceiling AP on steroids! Our bestseller cAP is back – juiced up and stronger than ever. Compared to the previous cAP models, the improved high-gain antenna increases the covered area by up to 100%! The new design features a larger high-gain antenna, higher sensitivity, and a built-in reflector. These improvements allow increasing the covered area by up to 100%, compared to the previous cAP models! The dual-band, dual-chain 2.4 and 5 GHz wireless radio provides a strong coverage in 360 degrees around it, so you don’t have to worry about the placement of the device so much. Putting it on the ceiling eliminates many signal absorption problems, such as the signal being blocked by large TV sets, metal cubicle walls in open space offices, etc. Even though the radio supports repeater mode, the two Gigabit Ethernet ports give you the ability to extend your network with cables, even if PoE power is required: the cAP XL ac supports 802.3af/at PoE input on the first port and passive PoE output (up to 57V) on the second port. https://www.aerial.net/shop/imageslarge/RBcAPGi-5acD2nD-XL_front.jpg https://www.aerial.net/shop/imageslarge/RBcAPGi-5acD2nD-XL_3d.jpg https://www.aerial.net/shop/imageslarge/RBcAPGi-5acD2nD-XL_ports.jpg https://www.aerial.net/shop/imageslarge/RBcAPGi-5acD2nD-XL_contents.jpg Product code RBcAPGi-5acD2nD-XL Architecture ARM 32bit CPU IPQ-4018 CPU core count 4 CPU nominal frequency 716 MHz RouterOS license 4 Operating System RouterOS Size of RAM 128 MB Storage size 16 MB Storage type FLASH MTBF Approximately 100.000 hours at 25C Tested ambient temperature -40°C to 70°C IPsec hardware acceleration Yes Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 6 Wireless 2.4 GHz chip model IPQ-4018 Wireless 2.4 GHz generation Wi-Fi 4 Wireless 5 GHz Max data rate 867 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 5.5 Wireless 5 GHz chip model IPQ-4018 Wireless 5 GHz generation Wi-Fi 5 AC speed AC1200 10/100/1000 Ethernet ports 2 Number of 1G Ethernet ports with PoE-out 1 Number of DC inputs 1 (PoE-IN) Max power consumption 24 W Max power consumption without attachments 11 W FAN count Passive PoE in 802.3af/at PoE in input Voltage 18-57 V PoE-out ports Ether2 PoE out Passive PoE up to 57V Max out per port output (input 18-30 V) 500 mA Max out per port output (input 30-57 V) 330 mA Max total out (A) 500 mA https://www.aerial.net/shop/product/176_181/3337/mikrotik-mikrotik-rb924i2ndbt5bg77-knot-iot.html MikroTik RB924i-2nD-BT5&BG77, KNOT - IoT Gateway MikroTik > SOHO wireless 74.90 RB924i-2nD-BT5&BG77 4752224007131 0 https://www.aerial.net/shop/imageslarge/knot_1.jpg KNOT - IoT Gateway for the most versatile and cost-effective setups KNOT is a truly universal device with exceptional connectivity options and protocol support. It is an IoT Gateway that uses Narrow Band 2 and CAT-M technology. Because of the low cost, low bandwidth cellular connection, it is supported by countless mobile operators around the globe. KNOT can monitor onboard GPIOs, convert Modbus protocol to TCP, and even forward Bluetooth packets to TCP/IP network via HTTPS and MQTT. You can use the KNOT as a TCP bridge from wired Modbus sensors to send readings to a Modbus server. Yes, the KNOT brings wireless connectivity to wired sensors and actuators, such as electricity meters and relays. It could be used as a backup connection for the Ethernet or as a management channel for your network. NB/CAT-M monthly plan is much cheaper than LTE. https://www.aerial.net/shop/imageslarge/knot_2.jpg https://www.aerial.net/shop/imageslarge/knot_3.jpg https://www.aerial.net/shop/imageslarge/knot_4.jpg https://www.aerial.net/shop/imageslarge/knot_5.jpg Product code RB924i-2nD-BT5&BG77 Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Switch chip model QCA9531 Dimensions 122 x 87 x 26 mm RouterOS license 4 Operating System RouterOS Size of RAM 64 MB Storage size 128 MB Storage type NAND MTBF (Approximately) 100.000 hours at 25°C Tested ambient temperature -40°C to 70°C MicroUSB input Voltage 5 V Number of DC inputs 3 (MicroUSB, DC jack, PoE-IN) DC jack input Voltage 12-57 V Max power consumption 18 W Max power consumption without attachments 5 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 18-57 V PoE-out ports Ether2 PoE out Passive PoE up to 57V Total output power 12 Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 1.5 Wireless 2.4 GHz chip model QCA9531 Wireless 2.4 GHz generation Wi-Fi 4 10/100 Ethernet ports 2 Number of SIM slots 1 Modem (Nano SIM) Serial console port RS485 Number of USB ports 1 USB slot type microUSB type AB Max USB current (A) 1 PCB temperature monitor Yes Voltage Monitor Yes Bluetooth version 5.2 Bluetooth RF connector type uUFL https://www.aerial.net/shop/product/176_181/1723/mikrotik-mikrotik-rb952ui5ac2nd-hap-ac.html MikroTik RB952Ui-5ac2nD, hAP ac lite MikroTik > SOHO wireless 42.80 RB952Ui-5ac2nD 4752224003195 1 https://www.aerial.net/shop/imageslarge/MT-RB952Ui-5ac2nD_main.jpg hAP ac lite The hAP ac lite is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4GHz and 5GHz frequencies at the same time. Unit is equipped with a 650MHz CPU, 64MB RAM and five 10/100Mbps Ethernet ports (PoE output on port #5). It supports dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license. RB952Ui-5ac2nD (International) supports 2412-2484MHz and 5150MHz - 5875MHz range https://www.aerial.net/shop/imageslarge/MT-RB952Ui-5ac2nD_top.jpg https://www.aerial.net/shop/imageslarge/MT-RB952Ui-5ac2nD_pcb.jpg https://www.aerial.net/shop/imageslarge/MT-RB952Ui-5ac2nD_side.jpg https://www.aerial.net/shop/imageslarge/MT-RB952Ui-5ac2nD_front.jpg Product code RB952Ui-5ac2nD Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Dimensions 113 x 89 x 28mm License level 4 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -30°C + 70°C Max Power consumption 8W PoE in Passive PoE PoE out Passive PoE Number of DC inputs 1 (DC jack) DC jack input Voltage 10-30 V Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 2 Wireless 2.4 GHz chip model QCA9531 Wireless 5 GHz number of chains 1 Wireless 5 GHz standards 802.11ac Antenna gain dBi for 5 GHz 2 Wireless 5 GHz chip model QCA-9887 10/100 Ethernet ports 5 Number of USB ports 1 USB Power Reset Yes USB slot type USB type A https://www.aerial.net/shop/product/176_181/1627/mikrotik-mikrotik-rb9412ndtc-hap-lite.html MikroTik RB941-2nD-TC, hAP lite TC MikroTik > SOHO wireless 18.94 RB941-2nD-TC 4752224003102 0 https://www.aerial.net/shop/imageslarge/MT-RB941-2nD-TC_main.jpg hAP lite The home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office. It supports button triggered WPS and can also be told to change to cAP mode and join a CAPsMAN centrally managed network by the push of a button. Of course, the device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others. The hAP lite is equipped with a powerful 650MHz CPU, 32MB RAM, dual chain 2.4GHz onboard wireless, four Fast Ethernet ports and a RouterOS L4 license. USB power supply is included. https://www.aerial.net/shop/imageslarge/MT-RB941-2nD-TC_3d.jpg https://www.aerial.net/shop/imageslarge/MT-RB941-2nD-TC_ports.jpg https://www.aerial.net/shop/imageslarge/MT-RB941-2nD-TC_rearLeft.jpg https://www.aerial.net/shop/imageslarge/MT-RB941-2nD-TC_rearRight.jpg Product code RB941-2nD-TC Architecture SMIPS CPU QCA9533 CPU core count 1 CPU nominal frequency 650 MHz License level 4 Operating System RouterOS Size of RAM 32 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -20°C + 70°C Max Power consumption 3.5W MicroUSB input Voltage 5V Number of DC inputs 1 (MicroUSB) Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 1.5 Wireless 2.4 GHz chip model QCA9533 10/100 Ethernet ports 4 https://www.aerial.net/shop/product/176_181/1628/mikrotik-mikrotik-rb951ui2nd-hap.html MikroTik RB951Ui-2nD, hAP MikroTik > SOHO wireless 33.17 RB951Ui-2nD 4752224003157 2 https://www.aerial.net/shop/imageslarge/MT-RB951Ui-2nD_main.jpg hAP This small home access point is the perfect device for homes or small offices where all you need is a wireless AP and a few wired devices connected. Based on our popular RB951-2n, the new hAP is an improvement in many areas. The device can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included. The hAP is preconfigured, so all you need to do, is plug in the internet cable, the power, and start using the internet by connecting to the MikroTik network. https://www.aerial.net/shop/imageslarge/MT-RB951Ui-2nD_rear.jpg https://www.aerial.net/shop/imageslarge/MT-RB951Ui-2nD_3d.jpg Product code RB951Ui-2nD CPU nominal frequency 650 MHz CPU core count 1 Size of RAM 64 MB 10/100 Ethernet ports 5 Wireless chip model QCA9531-BL3A-R Wireless standards 802.11b/g/n Number of USB ports 1 Power Jack 1 PoE in Yes PoE out Yes Supported input voltage 6 V - 30 V Dimensions 113 x 89 x 28 mm Operating System RouterOS Operating temperature range -30°C + 70°C Antenna gain DBI 1.5 Current Monitor No CPU QCA9531-BL3A-R Max Power consumption 5W USB slot type USB type A Number of chains 2 https://www.aerial.net/shop/product/176_181/3286/mikrotik-mikrotik-cloud-router-switch.html MikroTik Cloud Router Switch CRS304-4XG-IN MikroTik > SOHO wireless 148.74 CRS304-4XG-IN 4752224008954 3 https://www.aerial.net/shop/imageslarge/CRS304-4XG-IN_1.jpg CRS304-4XG-IN - Compact, powerful, and ready to simplify your 10 Gigabit network setups with 4x10G Ethernet ports ready to use out-of-the-box. CRS304-4XG-IN – a compact yet highly capable 10 Gigabit Ethernet switch designed to simplify your network setup routine. Unlike typical 10 Gigabit products, the new CRS304 is equipped with four ready-to-use 10 Gigabit Ethernet ports straight out of the box. Also, there is an additional Gigabit Ethernet port – for management purposes. The CRS304 features an enclosure that doubles as a robust, lightweight heat sink, eliminating the need for active cooling. This fanless design ensures silent operation, making it ideal for any environment where noise is a concern – offices, libraries, or even your bedroom homelab! It includes a convenient DIN rail mount on the side and standard screw attachment points on the back, allowing for seamless integration literally anywhere. Furthermore, the side DIN rail mount can be moved to the back of the switch. https://www.aerial.net/shop/imageslarge/CRS304-4XG-IN_2.jpg https://www.aerial.net/shop/imageslarge/CRS304-4XG-IN_3.jpg https://www.aerial.net/shop/imageslarge/CRS304-4XG-IN_4.jpg https://www.aerial.net/shop/imageslarge/CRS304-4XG-IN_5.jpg Product code CRS304-4XG-IN Architecture ARM 64bit CPU 98DX2528 CPU core count 2 CPU nominal frequency 1200 MHz Switch chip model 98DX2528 RouterOS license 5 Operating System RouterOS v7 Size of RAM 512 MB Storage size 32 MB Storage type FLASH MTBF Approximately 200.000 hours at 25°C Tested ambient temperature -40°C to 70°C Number of DC inputs 4 (DC jack, PoE-IN, 2-pin) DC jack input Voltage 12-57 V / 12-57 V 2-pin terminal input Voltage 12-57 V Max power consumption 21 W Max power consumption 15 W (w/o attachments) Cooling type Passive PoE in 802.3af/at PoE in input Voltage 36-57 V 10/100/1000 Ethernet ports 1 Number of Ethernet ports 4 (1G/2.5G/5G/10G) https://www.aerial.net/shop/product/176_181/2907/mikrotik-mikrotik-c53uig5hpaxd2hpaxd-hap-ax.html MikroTik C53UiG+5HPaxD2HPaxD, hAP ax³ MikroTik > SOHO wireless 105.94 C53UiG+5HPaxD2HPaxD 4752224007940 7 https://www.aerial.net/shop/imageslarge/hap_ax3_main.jpg hAP ax³ - Gen 6 wireless, 2.5 Gigabit Ethernet, PoE, WPA3, and more! hAP ax3 is our most powerful AX device with the best wireless network coverage so far. It features a modern quad-core ARM CPU running at 1.8 GHz and enough memory (1GB RAM + 128 MB NAND) for most tasks. AX product family offers up to 40% higher speed in the 5 GHz and up to 90% higher speed in the 2.4 GHz spectrum 4x Gigabit Ethernet ports and an ultra-fast 2.5 Gigabit port. Added a speedy USB 3 port for storage purposes or an additional LTE modem. https://www.aerial.net/shop/imageslarge/hap_ax3_ports.jpg https://www.aerial.net/shop/imageslarge/hap_ax3_front.jpg https://www.aerial.net/shop/imageslarge/hap_ax3_contents.jpg Number of USB ports 1 USB Power Reset Yes USB slot type USB 3.0 type A Max USB current (A) 1 Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 12-28 V Max power consumption 38 W Max power consumption without attachments 15 W Cooling type Passive PoE in Passive PoE PoE in input Voltage 18-28 V PoE-out ports Ether 1 PoE out Passive PoE Max out per port output (input 18-30 V) 0.625 A Max total out (A) 0.625 A Total output current 0.625 Total output power 15 Certification CE, FCC, IC, EAC, ROHS CPU temperature monitor Yes Mode button Yes Product code C53UiG+5HPaxD2HPaxD Architecture ARM 64bit CPU IPQ-6010 CPU core count 4 CPU nominal frequency auto (864 - 1800) MHz RouterOS license 6 Operating System RouterOS v7 Size of RAM 1 GB Storage size 128 MB Storage type NAND MTBF (Approximately) 200'000 hours at 25°C Tested ambient temperature -40°C to 70°C IPsec hardware acceleration Yes Wireless 2.4 GHz Max data rate 574 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11g/n/ax Antenna gain dBi for 2.4 GHz 3.3 Wireless 2.4 GHz chip model QCN-5022 Wireless 2.4 GHz generation Wi-Fi 6 Wireless 5 GHz Max data rate 1200 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac/ax Antenna gain dBi for 5 GHz 5.5 Wireless 5 GHz chip model QCN-5052 Wireless 5 GHz generation Wi-Fi 6 WiFi speed AX1800 10/100/1000 Ethernet ports 4 Number of 1G Ethernet ports with PoE-out 1 Number of 2.5G Ethernet ports 1 https://www.aerial.net/shop/product/176_181/3287/mikrotik-mikrotik-h53uig5haxq2haxq-chateau-pro.html MikroTik H53UiG-5HaxQ2HaxQ, Chateau PRO ax (w/o LTE/5G) MikroTik > SOHO wireless 148.74 H53UiG-5HaxQ2HaxQ 4752224009135 2 https://www.aerial.net/shop/imageslarge/H53UiG-5HaxQ2HaxQ_1.jpg Chateau PRO ax - A Wi-Fi 6 home access point for the advanced users – it comes with an exceptionally powerful wireless system and a matching CPU. Designed with professional users in mind, the Chateau PRO ax Wi-Fi 6 home access point is engineered to squeeze out maximum performance, handling more traffic than ever before. With its unstoppable quad-core ARM CPU running at 2.2 GHz and our latest cutting-edge wireless chip, Chateau PRO ax leverages 4 spatial streams to achieve double the data rate of the usual dual-chain devices, ensuring that your network is always fast, reliable, and ready to support even the most demanding tasks. With 5x Gigabit Ethernet ports and a USB 3.0 port, you can transform this Chateau into a home media server by plugging in an additional SSD storage. Or you could use the USB to add an LTE modem for backup! Its increased number of radio transceivers provides significantly improved wireless coverage and beamforming performance. https://www.aerial.net/shop/imageslarge/H53UiG-5HaxQ2HaxQ_2.jpg https://www.aerial.net/shop/imageslarge/H53UiG-5HaxQ2HaxQ_3.jpg https://www.aerial.net/shop/imageslarge/H53UiG-5HaxQ2HaxQ_5.jpg Product code H53UiG-5HaxQ2HaxQ Architecture ARM 64bit CPU IPQ-8072A CPU core count 4 CPU nominal frequency 2208 MHz Switch chip model IPQ-8072 RouterOS license 6 Operating System RouterOS v7 Size of RAM 1 GB Storage size 128 MB Storage type NAND MTBF Approximately 200.000 hours at 25°C Tested ambient temperature -40°C to 70°C Wireless 2.4 GHz Max data rate 1148 Mbit/s Wireless 2.4 GHz number of chains 4 Wireless 2.4 GHz standards 802.11b/g/n/ax Antenna gain dBi for 2.4 GHz 5 Wireless 2.4 GHz chip model QCN-5024 Wireless 2.4 GHz generation Wi-Fi 6 Wireless 5 GHz Max data rate 2400 Mbit/s Wireless 5 GHz number of chains 4 Wireless 5 GHz standards 802.11a/n/ac/ax Antenna gain dBi for 5 GHz 6 Wireless 5 GHz chip model QCN-5054 Wireless 5 GHz generation Wi-Fi 6 WiFi speed AX3600 10/100/1000 Ethernet ports 5 Number of 1G Ethernet ports with PoE-out 1 Number of USB ports 1 USB Power Reset Yes USB slot type USB 3.0 type A Max USB current (A) 1.5 Number of DC inputs 1 (DC jack) DC jack input Voltage 18-57 V Max power consumption 55 W Max power consumption without attachments 18 W Cooling type Passive PoE-out ports Ether5 PoE out Passive PoE up to 57V Max out per port output (input 18-30 V) 600 mA Max out per port output (input 30-57 V) 500 mA Max total out (A) 0.600 A Total output current 0.600 Total output power 22.8 https://www.aerial.net/shop/product/176_181/1934/mikrotik-mikrotik-rb952ui5ac2ndtc-hap-ac.html MikroTik RB952Ui-5ac2nD-TC, hAP ac lite TC MikroTik > SOHO wireless 42.80 RB952Ui-5ac2nD-TC 4752224003225 3 https://www.aerial.net/shop/imageslarge/MT-RB952Ui-5ac2nD-TC_main.jpg hAP ac lite tower The hAP ac lite is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4GHz and 5GHz frequencies at the same time. Unit is equipped with a 650MHz CPU, 64MB RAM and five 10/100Mbps Ethernet ports (PoE output on port #5). It supports dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license. RB952Ui-5ac2nD (International) supports 2412-2484MHz and 5150MHz - 5875MHz range. https://www.aerial.net/shop/imageslarge/MT-RB952Ui-5ac2nD-TC_ports.jpg https://www.aerial.net/shop/imageslarge/MT-RB952Ui-5ac2nD-TC_side.jpg https://www.aerial.net/shop/imageslarge/MT-RB952Ui-5ac2nD-TC_flat.jpg https://www.aerial.net/shop/product/176_181/2989/mikrotik-mikrotik-l41g2axd-hap-ax.html MikroTik L41G-2axD, hAP ax lite MikroTik > SOHO wireless 42.80 L41G-2axD 4752224008480 1 https://www.aerial.net/shop/imageslarge/hap_ax_lite_main.jpg hAP ax lite - Gen6 wireless on a budget – tiny, fast, and strong enough to harvest the power of RouterOS v7! hAP ax lite is the perfect device that combines compact size, affordable price and high performance. The latest Gen6 AX wireless chip allows you to squeeze the maximum capabilities out of the 2.4 GHz spectrum. Depending on the overall setup, you can expect an increase in speed of up to 90%! This router is very useful in setups like hotels or expanding offices – the appealing price point, compact size, and a strong set of features allows adding more devices with ease. You can also take it to your vacation. It takes up almost no space in your suitcase and allows you to break free from the restrictions of guest networks. With full RouterOS v7 support, you can run all kinds of advanced operations. For example, secure VPN tunnels, firewalls, bandwidth shaping, user access control, and so on. hAP ax lite features 256 MB of RAM, a modern ARM CPU running at 1GHz, 4x Gigabit Ethernet ports, and a high dual-chain antenna gain (up to 4.3 dBi!). https://www.aerial.net/shop/imageslarge/hap_ax_lite_3d.jpg https://www.aerial.net/shop/imageslarge/hap_ax_lite_rear.jpg https://www.aerial.net/shop/imageslarge/hap_ax_lite_contents.jpg Product code L41G-2axD Architecture ARM CPU IPQ-5010 CPU core count 2 CPU nominal frequency 800 MHz Switch chip model MT7531BE RouterOS license 4 Operating System RouterOS v7 Size of RAM 256 MB Storage size 128 MB Storage type NAND MTBF (Approximately) 100'000 hours at 25°C Tested ambient temperature -40°C to 70°C Wireless 2.4 GHz Max data rate 574 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n/ax Antenna gain dBi for 2.4 GHz 4.3 Wireless 2.4 GHz chip model IPQ-5010 Wireless 2.4 GHz generation Wi-Fi 6 WiFi speed AX600 10/100/1000 Ethernet ports 4 Number of DC inputs 1 Max power consumption 8 W Cooling type Passive Certification CE, FCC, IC, EAC, ROHS IP 20 Mode button Yes https://www.aerial.net/shop/product/176_181/2231/mikrotik-mikrotik-rbd52g5hacd2hndtc-hap-ac.html MikroTik RBD52G-5HacD2HnD-TC, hAP ac² MikroTik > SOHO wireless 58.86 RBD52G-5HacD2HnD-TC 4752224003539 4 https://www.aerial.net/shop/imageslarge/MT-RBD52G-5HacD2HnD-TC_main.jpg hAP ac² - Dual-Concurrent 2.4/5GHz AP, 802.11a/b/g/n/ac, Five Gigabit Ethernet ports, USB for 3G/4G support, universal tower case and IPsec hardware encryption support The hAP ac² is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4 GHz and 5 GHz frequencies at the same time. Five 10/100/1000 Ethernet ports provide Gigabit connections for your wired devices, USB can be used for external storage or 4G/LTE modem, and device supports IPsec hardware acceleration. New design universal case allows unit to be positioned either horizontally (desktop) or vertically (tower case). Wall anchored mounting kit is provided. - hAP ac2 supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations). https://www.aerial.net/shop/imageslarge/MT-RBD52G-5HacD2HnD-TC_3d.jpg https://www.aerial.net/shop/imageslarge/MT-RBD52G-5HacD2HnD-TC_desktop.jpg https://www.aerial.net/shop/imageslarge/MT-RBD52G-5HacD2HnD-TC_wallmount.jpg https://www.aerial.net/shop/imageslarge/MT-RBD52G-5HacD2HnD-TC_desktopFront.jpg Product code RBD52G-5HacD2HnD-TC Architecture ARM 32bit CPU IPQ-4018 CPU core count 4 CPU nominal frequency 716 MHz Dimensions 34 x 119 x 98mm License level 4 Operating System RouterOS Size of RAM 128 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 50°C PoE in Passive PoE PoE in input Voltage 18-28 V Number of DC inputs 2 (PoE-IN, DC jack) DC jack input Voltage 12-30 V Max power consumption 21 W Max power consumption without attachments 16 W AC speed AC1200 Antenna gain dBi for 2.4 GHz 2.5 Wireless 2.4 GHz standards 802.11b/g/n Wi-Fi generation 5 Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 5 GHz Max data rate 867 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz chip model IPQ-4018 Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 2.5 Wireless 5 GHz chip model IPQ-4018 10/100/1000 Ethernet ports 5 Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 https://www.aerial.net/shop/product/176_181/1391/mikrotik-mikrotik-rb951ui2hnd-ros-l4.html MikroTik RB951Ui-2HnD, ROS L4 MikroTik > SOHO wireless 44.89 RB951Ui-2HnD 4752224001146 1 https://www.aerial.net/shop/imageslarge/RB751G-2HnD_main.jpg RB951Ui-2HnD The RB951Ui-2HnD is a wireless SOHO AP with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz 1000mW 802.11b/g/n wireless AP with antennas built in. It has a 600MHz CPU,128MB of RAM and PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. https://www.aerial.net/shop/imageslarge/MT-RB951Ui-2HnD_3d.jpg https://www.aerial.net/shop/imageslarge/MT-RB951Ui-2HnD_side.jpg https://www.aerial.net/shop/product/176_181/2877/mikrotik-mikrotik-rbwapr2nd-wap-r.html MikroTik RBwAPR-2nD, wAP R (White) ROS L4 MikroTik > SOHO wireless 66.35 RBwAPR-2nD 4752224004956 1 https://www.aerial.net/shop/imageslarge/MT-RBwAP2nD_main.jpg wAP R - Small weatherproof wireless access point with LTE antennas and miniPCI-e slot The wAP R is a small weatherproof 2.4Ghz wireless access point with a miniPCI-e slot (so you can use your own LTE card) and LTE antennas. Unit comes with one 10/100 Ethernet LAN port for your wired devices. The weatherproof device can be mounted outside your house, in the vehicle, on your porch or anywhere else where you need wireless access from your phone or computer. It also includes a desktop stand so you can put it inside the building near a window. Unit has the several powering options - 9-30V PoE-in by Ethernet port, DC jack and automotive connector, very handy in mobile devices like car, bus or train. https://www.aerial.net/shop/imageslarge/RBwAPR-2nD_ports.jpg https://www.aerial.net/shop/imageslarge/RBwAPR-2nD_pcb.jpg https://www.aerial.net/shop/imageslarge/RBwAPR-2nD_contents.jpg Product code RBwAPR-2nD Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Dimensions 185x85x30 mm RouterOS license 4 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH MTBF Approximately 100'000 hours at 25C Tested ambient temperature -40°C to 60°C Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 2 Wireless 2.4 GHz chip model QCA9531 Wireless 2.4 GHz generation Wi-Fi 4 10/100 Ethernet ports 1 Number of SIM slots 1 Modem (Mini SIM) MiniPCI-e slots 1 Number of DC inputs 3 (DC jack, Automotive, PoE-IN) DC jack input Voltage 9-30 V Automotive input Voltage 9-30 V Max power consumption 6 W Cooling type Passive PoE in Passive PoE PoE in input Voltage 9-30 V Certification CE, FCC, IC, E-MARK, EAC, ROHS IP IP54 PCB temperature monitor Yes Voltage Monitor Yes https://www.aerial.net/shop/product/176_181/1453/mikrotik-mikrotik-rbmap2nd-map.html MikroTik RBmAP2nD, mAP MikroTik > SOHO wireless 33.71 RBmAP2nD 4752224004291 3 https://www.aerial.net/shop/imageslarge/MT-RBmAP2nD_main.jpg mAP 2nD The mAP (micro Access Point) is a tiny size wireless 2.4GHz Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources - USB, Passive and power jack. It also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it. https://www.aerial.net/shop/imageslarge/MT-RBmAP2nD_front.jpg https://www.aerial.net/shop/imageslarge/MT-RBmAP2nD_contents.jpg https://www.aerial.net/shop/product/176_181/1817/mikrotik-mikrotik-rb962uigs5hact2hnt-hap-ac.html MikroTik RB962UiGS-5HacT2HnT, hAP ac MikroTik > SOHO wireless 96.31 RB962UiGS-5HacT2HnT 4752224003331 2 https://www.aerial.net/shop/imageslarge/MT-RB962UiGS-5HacT2HnT_main.jpg hAP ac It is a dual band device with Gigabit ports that allow the full advantages of 802.11ac technology speed, while maintaining compatibility with legacy devices in 2GHz 802.11 b/g/n and 5GHz a/n modes. The omnidirectional antennas allow to mount the hAP ac in any location, and the high power transmitter will ensure good coverage for the mobile devices in your home, office or public location. It includes a USB port for attaching extra storage or a 3G/4G modem, PoE output on the last Ethernet port, to power other RouterBOARD devices, for connecting active or passive optical network modules. RB962UiGS-5HacT2HnT (International) supports 2412-2484MHz and 5150MHz-5875MHz range. https://www.aerial.net/shop/imageslarge/MT-RB962UiGS-5HacT2HnT_pcb.jpg https://www.aerial.net/shop/imageslarge/MT-RB962UiGS-5HacT2HnT_ports.jpg https://www.aerial.net/shop/imageslarge/MT-RB962UiGS-5HacT2HnT_rear.jpg https://www.aerial.net/shop/imageslarge/MT-RB962UiGS-5HacT2HnT_side.jpg Product code RB962UiGS-5HacT2HnT CPU nominal frequency 720 MHz CPU core count 1 Size of RAM 128 MB 10/100/1000 Ethernet ports 5 Wireless chip model QCA9880 Wireless standards 802.11a/n/ac Secondary wireless chip model QCA9558 Secondary wireless standards 802.11b/g/n Number of USB ports 1 Power Jack 1 Supported input voltage 11 V - 57 V PoE in Yes PoE out Yes Voltage monitor Yes PCB temperature monitor Yes Διαστάσεις 114 x 137 x 29mm Operating System RouterOS Operating temperature range -20°C +60°C License level 4 Antenna gain DBI 2 CPU QCA9558 Max Power consumption 17W SFP ports 1 USB slot type USB type A Number of chains 3 Storage type FLASH Storage size 16 MB https://www.aerial.net/shop/product/176_181/2186/mikrotik-mikrotik-rb4011igs5hacq2hndin-ros-l5.html MikroTik RB4011iGS+5HacQ2HnD-IN - ROS L5 MikroTik > SOHO wireless 210.81 RB4011iGS+5HacQ2HnD-IN 4752224002693 2 https://www.aerial.net/shop/imageslarge/MT-RB4011iGS+5HacQ2HnD-IN_main.jpg RB4011 series RB4011 series - amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration for a great price! The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit. The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black. RB4011iGS+5HacQ2HnD-IN (WiFi model) is dual band, four chain unit with a supported data rate of up to 1733 Mbps in 5GHz. For legacy devices, the unit also has a dual chain 2GHz wireless card installed in miniPCI-e slot. Note: The RB4011 does not support Passive DAC modules, 1GB copper SFP modules and SFP GPON modules. https://www.aerial.net/shop/imageslarge/MT-RB4011iGS+5HacQ2HnD-IN_front.jpg https://www.aerial.net/shop/imageslarge/MT-RB4011iGS+5HacQ2HnD-IN_bottom.jpg https://www.aerial.net/shop/imageslarge/MT-RB4011iGS+5HacQ2HnD-IN_rear.jpg Product code RB4011iGS+5HacQ2HnD-IN Architecture ARM 32bit CPU AL21400 CPU core count 4 CPU nominal frequency 1.4 GHz Dimensions 228 x 120 x 30 mm License level 5 Operating System RouterOS Size of RAM 1 GB Storage size 512 MB Storage type NAND Tested ambient temperature -40°C to 45°C PoE in Passive PoE PoE out Passive PoE up to 57V PoE in input Voltage 18-57 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 12-57 V Max out per port output (input > 30 V) 420 mA Max out per port output (input < 30 V) 600 mA Max total out (A) 600 mA Max power consumption 44 W Max power consumption without attachments 23 W Wireless 5 GHz number of chains 4 Wireless 5 GHz Max data rate 1733 Mbit/s Wireless 5 GHz standards 802.11ac MU-MIMO AC speed AC2000 Antenna gain dBi for 5 GHz 3 Wireless 5 GHz chip model QCA9984 Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 3 Wireless 2.4 GHz chip model R11e-2HnD 10/100/1000 Ethernet ports 10 SFP+ ports 1 MiniPCI-e slots 1 Serial port RJ45 PCB temperature monitor Yes Voltage Monitor Yes https://www.aerial.net/shop/product/176_181/2879/mikrotik-mikrotik-c52ig5haxd2haxdtc-hap-ax.html MikroTik C52iG-5HaxD2HaxD-TC, hAP ax² MikroTik > SOHO wireless 74.90 C52iG-5HaxD2HaxD-TC 4752224007124 1 https://www.aerial.net/shop/imageslarge/C52iG-5HaxD2HaxD-TC_main.jpg hAP ax² A Generation 6 version of the legendary hAP ac². With PoE-in and PoE-out, much faster wireless, more RAM, and a modern CPU. The modern quad-core CPU running at 864 MHz combined with a solid GB of RAM packs a hefty punch when it comes to heavy operations like complex firewall rules, IPsec hardware encryption, using more threads or experimenting with the most advanced RouterOS features. And with the addition of WPA3 advanced encryption support, you’re safer than ever before. Like the previous models, hAP ax2 can be mounted vertically, horizontally, or even on the wall – without sacrificing the strong signal. https://www.aerial.net/shop/imageslarge/C52iG-5HaxD2HaxD-TC_front.jpg https://www.aerial.net/shop/imageslarge/C52iG-5HaxD2HaxD-TC_promo.jpg https://www.aerial.net/shop/imageslarge/C52iG-5HaxD2HaxD-TC_contents.jpg Product code C52iG-5HaxD2HaxD-TC Architecture ARM 64bit CPU IPQ-6010 CPU core count 4 CPU nominal frequency 864 MHz RouterOS license 4 Operating System RouterOS (v7 only) Size of RAM 1 GB Storage size 128 MB Storage type NAND MTBF (Approximately) 100.000 hours at 25°C Tested ambient temperature -40°C to 50°C Wireless 2.4 GHz Max data rate 574 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n/ax Antenna gain dBi for 2.4 GHz 4.5 Wireless 2.4 GHz chip model QCN-5022 Wireless 2.4 GHz generation Wi-Fi 6 Wireless 5 GHz Max data rate 1200 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac/ax Antenna gain dBi for 5 GHz 4 Wireless 5 GHz chip model QCN-5052 Wireless 5 GHz generation Wi-Fi 6 WiFi speed AX1800 10/100/1000 Ethernet ports 5 Number of 1G Ethernet ports with PoE-out 1 Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 12-28 V Max power consumption 27 W Max power consumption without attachments 12 W Cooling type Passive PoE in Passive PoE PoE in input Voltage 18-28 V PoE-out ports Ether 1 PoE out Passive PoE Max out per port output (input 18-30 V) 600 mA Max total out (A) 0.6 A Total output current 0.6 Total output power 16.8W Certification CE, FCC, IC, EAC, ROHS https://www.aerial.net/shop/product/176_181/2109/mikrotik-mikrotik-rbcapgi5acd2nd-cap-ac.html MikroTik RBcAPGi-5acD2nD, cAP ac MikroTik > SOHO wireless 63.13 RBcAPGi-5acD2nD 4752224003416 6 https://www.aerial.net/shop/imageslarge/MT-RBcAPGi-5acD2nD_main.jpg cAP ac Dual-band 2.4 / 5GHz wireless access point for mounting on a ceiling or wall with two Gigabit Ethernet ports (one with PoE output) and 802.11ac support The concurrent dual band wireless radio supports dual chain 2 GHz 802.11b/g/n and 5 GHz in a/n/ас standards, and will provide coverage in 360 degrees around it. Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables. Even if PoE power is required, since the cAP ac supports 802.3af/at PoE input on the first port, and passive PoE output on the second port. cAP ac supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations). https://www.aerial.net/shop/imageslarge/MT-RBcAPGi-5acD2nD_ceiling.jpg https://www.aerial.net/shop/imageslarge/MT-RBcAPGi-5acD2nD_wall.jpg https://www.aerial.net/shop/imageslarge/MT-RBcAPGi-5acD2nD_contents.jpg Product code RBcAPGi-5acD2nD Architecture ARM 32bit CPU IPQ-4018 CPU core count 4 CPU nominal frequency 716 MHz Dimensions - Round case ⌀136 mm, height: 30 mm Dimensions - Square case 145 mm x 145 mm x 30 mm License level 4 Operating System RouterOS Size of RAM 128 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 50° C Max Power consumption 13W PoE in 802.3af/at PoE out Passive PoE up to 57V PoE in input Voltage 17-57 V Number of DC inputs 1 (PoE-IN) Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 2 Wireless 2.4 GHz chip model IPQ-4018 Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 2.5 Wireless 5 GHz chip model IPQ-4018 https://www.aerial.net/shop/product/176_181/3318/mikrotik-mikrotik-wapg5haxd2haxd-wap-ax.html MikroTik wAPG-5HaxD2HaxD, wAP ax MikroTik > SOHO wireless 67.31 wAPG-5HaxD2HaxD 4752224009180 10 https://www.aerial.net/shop/imageslarge/wap_ax_1.jpg wAP ax - Fast and Reliable Wi-Fi 6 for Challenging Environments wAP ax brings fast and reliable Wi-Fi 6 to your countryside getaway or any other challenging environments – like a rural gas station or a bus stop. wAP’s legendary weatherproof form-factor has been tested for several generations all across the globe, and remains a favorite among MikroTik users for its simplicity and durability. A mighty dual-band, dual-chain (2x2 MIMO) radio ensures fast and reliable wireless connection both indoors and outdoors. Wi-Fi 6 offers significantly improved energy efficiency and security. OWE/WPA3-PSK/WPA3-EAP encryption and management frame protection help prevent all sorts of attacks, like brute-forcing and Deauthentication Attacks. https://www.aerial.net/shop/imageslarge/wap_ax_2.jpg https://www.aerial.net/shop/imageslarge/wap_ax_3.jpg https://www.aerial.net/shop/imageslarge/wap_ax_4.jpg https://www.aerial.net/shop/imageslarge/wap_ax_5.jpg Product code wAPG-5HaxD2HaxD Architecture ARM CPU IPQ-5010 CPU core count 2 CPU nominal frequency 800 MHz RouterOS license 4 Operating System RouterOS v7 Size of RAM 256 MB Storage size 128 MB Storage type NAND MTBF Approximately 100.000 hours at 25°C Tested ambient temperature -40°C to 70°C Wireless 2.4 GHz Max data rate 574 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n/ax Antenna gain dBi for 2.4 GHz 7 Wireless 2.4 GHz chip model IPQ-5010 Wireless 2.4 GHz generation Wi-Fi 6 Wireless 5 GHz Max data rate 2400 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac/ax Antenna gain dBi for 5 GHz 7 Wireless 5 GHz chip model QCN-6102 Wireless 5 GHz generation Wi-Fi 6 WiFi speed AX3000 10/100/1000 Ethernet ports 2 Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 12-57 V Max power consumption 9 W Max power consumption without attachments 9 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 18-57 V Certification CE, FCC, IC, EAC, ROHS IP 54 https://www.aerial.net/shop/product/176_216/3167/mikrotik-mikrotik-lhggrfg621ea-lhgg-lte6.html MikroTik LHGGR&FG621-EA, LHGG LTE6 kit MikroTik > LTE/5G products 133.77 LHGGR&FG621-EA 4752224008909 2 https://www.aerial.net/shop/imageslarge/LHGGR&FG621-EA_1.jpg LHGG LTE6 kit - Its large 17 dBi antenna and our latest Cat6 LTE modem with the ability to use multiple LTE bands at the same time ensure fast and reliable connectivity when all other options fail. Mount it on a pole, a mast, on your roof or any other tall structure – and always stay connected! It has gained Gigabit Ethernet – so you can harness the full speed potential of the LTE modem, which has also been upgraded from Cat4 to Cat6! The new LTE modem allows us to drive the price down, boost performance, and offer further discounts on mobile operator project volume orders! The sleek and unobtrusive weatherproof design has proven its resilience across various climate zones, enduring even the harshest winds effortlessly. The mighty high-gain antenna boasts broad support for a versatile range of LTE bands, spanning from 2.7 GHz to 700 MHz. https://www.aerial.net/shop/imageslarge/LHGGR&FG621-EA_2.jpg https://www.aerial.net/shop/imageslarge/LHGGR&FG621-EA_3.jpg https://www.aerial.net/shop/imageslarge/LHGGR&FG621-EA_4.jpg https://www.aerial.net/shop/imageslarge/LHGGR&FG621-EA_5.jpg Product code LHGGR&FG621-EA Architecture ARM 64bit CPU 88F3720 CPU core count 2 CPU nominal frequency 800 MHz RouterOS license 3 Operating System RouterOS v7 Size of RAM 256 MB Storage size 16 MB Storage type FLASH MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -40°C to +70°C Number of DC inputs 1 (PoE-IN) Max power consumption 8 W Max power consumption without attachments 8 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 12-57 V 3G Category R8 (42.2Mbps Downlink, 11.2Mbps Uplink) 3G bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz) LTE Category 6 (300Mbit/s Downlink, 50Mbit/s Uplink) MIMO DL 2x2 MIMO UL 1x1 LTE FDD bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) 8 (900 MHz) / 20 (800MHz) / 28 (700MHz) LTE TDD bands 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz) TAC 86335904 10/100/1000 Ethernet ports 1 Number of SIM slots 1 Modem (Micro SIM) MiniPCI-e slots 1 Certification CE, EAC, ROHS IP 54 https://www.aerial.net/shop/product/176_216/2396/mikrotik-mikrotik-rbd53g5hacd2hndtceg12ea-chateau-lte12.html MikroTik RBD53G-5HacD2HnD-TC&EG12-EA, Chateau LTE12 kit MikroTik > LTE/5G products 171.22 RBD53G-5HacD2HnD-TC&EG12-EA 4752224003546 0 https://www.aerial.net/shop/imageslarge/MT-RBD53G-5HacD2HnD-TC&EG12-EA_main.jpg Chateau LTE12 - One router to delight them all – introducing the ultimate home AP with LTE support Let’s face it – most of the standard issue access points can’t really satisfy the extremely diverse client base – they either lack features, users want more speed and higher gain, the price is too high or they look weird. We decided to take all the aspects that are important for most home users and create a single device that will make them happy – this is the MikroTik Chateau. It is a high-speed, dual-band home access point with CAT12 LTE – for really fast Internet anywhere, anytime. But LTE is not the only option – Chateau also features 5 x Gigabit Ethernet ports and a full size USB port. Strong dual-chain dual-band 2.4/5 GHz wireless for concurrent coverage will solve most interference issues in a crowded environment. For example, a client can simultaneously use the 2.4 GHz channel for all household mobile devices and reserve the 5 GHz channel for tasks that are sensitive to packet loss – such as streaming high-quality videos. Not only our RouterOS software comes with robust security options, we also focus on the production security. There is no outsourcing, every device is assembled in our premises and all the components come from reputable, trusted partners – such as Qualcomm. We cooperate with European law-makers and work hard to ensure full compliance with all the necessary safety policies. MikroTik is all about smooth, long-term cooperation without surprises. Reach speeds of up to 600 Mbps with carrier aggregation, as CAT12 allows devices to use three bands at the same time. That is a huge advantage when there are a lot of LTE users in the area. Chateau LTE12 provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside. Depending on the service provider, we have seen Internet speed doubling in rural areas after switching to carrier aggregation, so there is no need to wait for cable network expansions. https://www.aerial.net/shop/imageslarge/MT-ChateauLTE12_front.jpg https://www.aerial.net/shop/imageslarge/MT-ChateauLTE12_rear.jpg https://www.aerial.net/shop/imageslarge/MT-ChateauLTE12_contents.jpg Product code RBD53G-5HacD2HnD-TC&EG12-EA Architecture ARM 32bit CPU IPQ-4019 CPU core count 4 CPU nominal frequency 716 MHz Dimensions 240 x 156 x 44 mm License level 4 Operating System RouterOS Size of RAM 256 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C Number of DC inputs 1 (DC jack) DC jack input Voltage 12-28 V Max power consumption 23 W Max power consumption without attachments 17 W 3G Category R8 (42.2Mbps Downlink, 11.2Mbps Uplink) 3G bands 1 (2100MHz) / 5 (850MHz) / 8 (900MHz) / 3 (1800MHz) LTE Category 12 (600Mbps Downlink, 150Mbps Uplink) LTE FDD bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800MHz) / 28 (700MHz) LTE TDD bands 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz) AC speed AC1200 Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 3 Wireless 2.4 GHz chip model IPQ-4019 Wireless 2.4 GHz generation Wi-Fi 4 Wireless 5 GHz Max data rate 867 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 5.5 Wireless 5 GHz chip model IPQ-4019 Wireless 5 GHz generation Wi-Fi 5 10/100/1000 Ethernet ports 5 Number of SIM slots 1 Modem (Micro SIM) Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 Mode button Yes Certification CE/RED, EAC, ROHS https://www.aerial.net/shop/product/176_216/3220/mikrotik-mikrotik-wapgr5hacd2hndec200aeu-wap-ac.html MikroTik wAPGR-5HacD2HnD&EC200A-EU, wAP ac LTE kit (2024) MikroTik > LTE/5G products 126.28 wAPGR-5HacD2HnD&EC200A-EU 4752224009241 2 https://www.aerial.net/shop/imageslarge/wAPGR-5HacD2HnD&EC200A-EU_1.jpg wAP ac LTE kit (2024) - A refresh of the classic dual-band wAP LTE kit with Gigabit Ethernet with a brand new LTE modem. wAP ac LTE kit is a tiny dual-band weatherproof wireless access point for installation outside your house, in the garden, on your porch, or in any other challenging environment where you need a capable wireless connection on a tight budget. Two Gigabit ports allow using the speedy built-in LTE modem as a mobile internet backup connection, in case you already have a wired ISP. The new revision features a new LTE modem that offers improved connectivity, the addition of the popular B28 band. wAP ac LTE kit is weatherproof and can be fixed to any external wall from the inside of the case – for extra security and less visible attachments. The bottom part can also be secured with a special anti- vandal screw, which can only be opened by the owner. There is an opening in the back of the case, allowing you to run the Ethernet cable directly behind the unit and through the wall. https://www.aerial.net/shop/imageslarge/wAPGR-5HacD2HnD&EC200A-EU_2.jpg https://www.aerial.net/shop/imageslarge/wAPGR-5HacD2HnD&EC200A-EU_3.jpg https://www.aerial.net/shop/imageslarge/wAPGR-5HacD2HnD&EC200A-EU_4.jpg https://www.aerial.net/shop/imageslarge/wAPGR-5HacD2HnD&EC200A-EU_5.jpg Certification CE, E-MARK, EAC, ROHS IP 54 PCB temperature monitor Yes Voltage Monitor Yes Number of SIM slots 1 Modem (Micro SIM) MiniPCI-e slots 1 10/100/1000 Ethernet ports 2 Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 2.5 Wireless 2.4 GHz chip model IPQ-4018 Wireless 2.4 GHz generation Wi-Fi 4 Wireless 5 GHz Max data rate 867 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 2.5 Wireless 5 GHz chip model IPQ-4018 Wireless 5 GHz generation Wi-Fi 5 2G Category Class12 2G bands 8 (900MHz) / 3 (1800MHz) 3G Category R7 (21Mbps Downlinks, 5.76Mbps Uplink) 3G bands 5 (850MHz) / 8 (900MHz) / 1 (2100MHz) LTE Category 4 (150Mbps Downlink, 50Mbps Uplink) LTE FDD bands 20 (800MHz) / 3 (1800MHz) / 1 (2100MHz) / |7 (2600MHz) / 8 (900 MHz) / 5 (850MHz) / 28 (700MHz) LTE TDD bands 40 (2300MHz) / 38 (2600MHz) / 41 (2500MHz) TAC 86314105 Number of DC inputs 2 (PoE-IN, DC jack) DC jack input Voltage 10-57 V Max power consumption 12 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 18-57 V Product code wAPGR-5HacD2HnD&EC200A-EU Architecture ARM 32bit CPU IPQ-4018 CPU core count 4 CPU nominal frequency auto MHz Switch chip model IPQ-4018 RouterOS license 4 Operating System RouterOS v7 Size of RAM 128 MB Storage FLASH 16 MB MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -30°C to 60°C IPsec hardware acceleration Yes https://www.aerial.net/shop/product/176_216/3134/mikrotik-mikrotik-d53g5hacd2hndtcrg520feu-chateau-5g.html MikroTik D53G-5HacD2HnD-TC&RG520F-EU, Chateau 5G R16 MikroTik > LTE/5G products 358.48 D53G-5HacD2HnD-TC&RG520F-EU 4752224008923 1 https://www.aerial.net/shop/imageslarge/chateau5gr16_1.jpg Chateau 5G R16 - Ultra-fast 5G mobile internet for every home or office. Perfect for secure remote work VPNs anytime, anyplace! Chateau 5G R16 is designed to make 5G more affordable than ever. Adding features like NR CA and 3GPP Release standard with extra ENDC combination support. It can even simultaneously use the 5G and 4G bands to maximize the throughput! It also supports 4x4 MIMO for the lower frequency range, including band 8, 20, and 28 – for even better signal in the countryside. There are 5x Gigabit Ethernet ports – enough to connect most household devices: PCs, TVs, game consoles, and so on. More than just a router: try containers for home automation, ad blocking, simple web hosting, private DNS, network storage, IoT, and so much more. https://www.aerial.net/shop/imageslarge/chateau5gr16_2.jpg https://www.aerial.net/shop/imageslarge/chateau5gr16_3.jpg https://www.aerial.net/shop/imageslarge/chateau5gr16_4.jpg Product code D53G-5HacD2HnD-TC&RG520F-EU Architecture ARM 32bit CPU IPQ-4019 CPU core count 4 CPU nominal frequency 448-896 (auto) MHz Switch chip model IPQ-4019 Dimensions 240 x 156 x 44 mm RouterOS license 4 Operating System RouterOS v7 Size of RAM 256 MB Storage size 16 MB Storage type FLASH MTBF Approximately 200'000 hours at 25C Tested ambient temperature -40°C to 70°C IPsec hardware acceleration Yes Number of DC inputs 1 (DC jack) DC jack input Voltage 12-28 V Max power consumption 25 W Max power consumption without attachments 15 W Cooling type Passive 3G Category R8 (42.2Mbps Downlink, 5.76Mbps Uplink) 3G bands 5 (850MHz) / 8 (900MHz) / 1 (2100MHz) LTE Category 20 (2.0 Gbps Downlink, 200 Mbps Uplink) LTE FDD bands 5 (850MHz) / 20 (800MHz) / 28 (700MHz) / 3 (1800MHz) / 1 (2100MHz) / 7 (2600MHz) / 8 (900 MHz) / 32 (1500 MHz) LTE TDD bands 40 (2300MHz) / 41 (2500MHz) / 42 (3500MHz) / 43 (3700MHz) / 38 (2600MHz) 5G NSA FDD bands 5 (850 MHz) / 8 (900 MHz) / 20 (800 MHz) / 28 (700 MHz) / 3 (1800 MHz) / 1 (2100 MHz) / 7 (2600 MHz) 5G NSA TDD bands 75 (1500 MHz) / 40 (2300 MHz) / 41 (2500 MHz) / 77 (3700 MHz) / 38 (2600 MHz) / 78 (3500 MHz) / 76 (1500 MHz) 5G SA FDD bands 5 (850 MHz) / 8 (900 MHz) / 20 (800 MHz) / 28 (700 MHz) / 3 (1800 MHz) / 1 (2100 MHz) / 7 (2600 MHz) 5G SA TDD bands 76 (1500 MHz) / 40 (2300 MHz) / 41 (2500 MHz) / 77 (3700 MHz) / 38 (2600 MHz) / 78 (3500 MHz) / 75 (1500 MHz) TAC 86945405 Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11a/b/g/n Antenna gain dBi for 2.4 GHz 3 Wireless 2.4 GHz chip model IPQ-4019 Wireless 2.4 GHz generation Wi-Fi 4 Wireless 5 GHz Max data rate 867 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 5.5 Wireless 5 GHz chip model IPQ-4019 Wireless 5 GHz generation Wi-Fi 5 10/100/1000 Ethernet ports 5 Number of SIM slots 1 Modem (Micro SIM) Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 Number of M.2 slots 1 https://www.aerial.net/shop/product/176_216/2923/mikrotik-mikrotik-atlgmeg18ea-atl-lte18.html MikroTik ATLGM&EG18-EA, ATL LTE18 kit MikroTik > LTE/5G products 208.67 ATLGM&EG18-EA 4752224008312 2 https://www.aerial.net/shop/imageslarge/atl18_main.jpg ATL LTE18 kit - Fast CAT 18 LTE Modem, Gigabit Ethernet with PoE-In, 64-Bit Dual-Core ARM CPU, High-Gain Antenna, Snow-Resistant, 4X4 MIMO Support, LTE Band 28, 700 MHz - 1 GHz Support The ATL LTE18 kit is a device used to connect to a mobile 3G/LTE network. Put it outside on a pole or just in a high enough place and it's there where cell phones don't have a signal. Thanks to a large radome antenna with high gain, the device can connect to transmitters even in extreme rural locations, enabling Internet access even in places where nothing else is available. The unit is equipped with one Gigabit Ethernet port, it has a built-in high quality Category 18 LTE modem for speeds up to 1200 Mbps/150 Mbps (download/upload), very powerful 64-bit 2-core ARM 1200MHz CPU, 16MB storage and 256MB RAM. https://www.aerial.net/shop/imageslarge/atl18_side.jpg https://www.aerial.net/shop/imageslarge/atl18_rear.jpg https://www.aerial.net/shop/imageslarge/atl18_port.jpg https://www.aerial.net/shop/imageslarge/atl18_contents.jpg Product code ATLGM&EG18-EA Architecture ARM 64bit CPU 88F3720 CPU core count 2 CPU nominal frequency 800 MHz RouterOS license 3 Operating System RouterOS v7 Size of RAM 256 MB Storage size 16 MB Storage type FLASH MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -40°C to 70°C Dimensions Ø315mm x 170mm Number of DC inputs 1 (PoE-IN) Max power consumption 8 W Max power consumption without attachments 8 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 12-57 V 3G Category R8 (42.2Mbps Downlink, 11.2Mbps Uplink) 3G bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz) LTE Category 18 (1.2Gbps Downlink, 150Mbps Uplink) LTE FDD bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900 MHz) 20 (800MHz) / 28 (700MHz) / 7 (2600MHz) LTE TDD bands 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz) 10/100/1000 Ethernet ports 1 Number of SIM slots 1 Modem (Micro SIM) Number of M.2 slots 1 Mode button Yes Certification CE, EAC, ROHS IP IP54 https://www.aerial.net/shop/product/176_216/3053/mikrotik-mikrotik-sxtrfg621ea-sxt-lte6.html MikroTik SXTR&FG621-EA, SXT LTE6 kit (2023) MikroTik > LTE/5G products 88.81 SXTR&FG621-EA 4752224008916 0 https://www.aerial.net/shop/imageslarge/sxt_lte6_2023_main.jpg SXTR&FG621-EA - SXT LTE6 kit - Affordable mobile internet connectivity in remote areas. Lowest price ever due to the brand new, cost-effective LTE modem. This LTE chip can provide reliable Internet connectivity for your building even where cell phones fail. Included two Micro-SIM slots – for backup. The unit is equipped with two Ethernet ports and PoE functionality: PoE-in on Ether1, PoE-out on Ether2. That means SXT can power other devices or be powered by other devices, making your cable management so much easier! Shipped with a 24 V power supply, but can support a wide range of 12-57 V and is 802.3af/at compliant. https://www.aerial.net/shop/imageslarge/sxt_lte6_2023_rear.jpg https://www.aerial.net/shop/imageslarge/sxt_lte6_2023_mount.jpg https://www.aerial.net/shop/imageslarge/sxt_lte6_2023_pcb.jpg https://www.aerial.net/shop/imageslarge/sxt_lte6_2023_contents.jpg Product code SXTR&FG621-EA Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Switch chip model QCA9531 RouterOS license 3 Operating System RouterOS v7 Size of RAM 64 MB Storage size 16 MB Storage type FLASH MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -40°C to 60°C Number of DC inputs 1 (PoE-IN) Max power consumption 22 W Max power consumption without attachments 5 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 12-57 V PoE-out ports Ether2 PoE out Passive PoE up to 57V Max out per port output (input 18-30 V) 600 mA Max out per port output (input 30-57 V) 400 mA Max total out (A) 600 mA 3G Category R8 (42.2Mbps Downlink, 11.2Mbps Uplink) 3G bands 3 (1800MHz) / 5 (850MHz) / 8 (900MHz) / 1 (2100MHz) LTE Category 6 (300Mbit/s Downlink, 50Mbit/s Uplink) MIMO DL 2x2 MIMO UL 1x1 LTE FDD bands 5 (850MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800MHz) 1 (2100MHz) / 3 (1800MHz) / 28 (700MHz) LTE TDD bands 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz) TAC 86335904 10/100 Ethernet ports 2 Number of SIM slots 2 Modem (Micro SIM) MiniPCI-e slots 1 Mode button Yes Certification CE, EAC, ROHS IP 54 https://www.aerial.net/shop/product/176_216/3377/mikrotik-mikrotik-d53g5hacd2hndtceg120kea-chateau-lte12.html MikroTik D53G-5HacD2HnD-TC&EG120K-EA, Chateau LTE12 kit 2025 MikroTik > LTE/5G products 138.05 D53G-5HacD2HnD-TC&EG120K-EA 4752224009623 2 https://www.aerial.net/shop/imageslarge/chateau_lte12_2025_1.jpg Chateau LTE12 (2025) - Your best friend when it comes to mobile networks Chateau LTE12 is the solution, delivering faster, more reliable mobile internet, whether you are in the city or the countryside. Features: https://www.aerial.net/shop/imageslarge/chateau_lte12_2025_2.jpg https://www.aerial.net/shop/imageslarge/chateau_lte12_2025_3.jpg https://www.aerial.net/shop/imageslarge/chateau_lte12_2025_4.jpg Product code D53G-5HacD2HnD-TC&EG120K-EA Architecture ARM 32bit CPU IPQ-4019 CPU core count 4 CPU nominal frequency 448-896 (auto) MHz Switch chip model IPQ-4019 RouterOS license 4 Operating System RouterOS v7 Size of RAM 256 MB Storage size 32 MB Storage type FLASH MTBF Approximately 200.000 hours at 25°C Tested ambient temperature -20°C to 70°C Number of DC inputs 1 (DC jack) DC jack input Voltage 12-28 V Max power consumption 24 W Max power consumption without attachments 18 W Cooling type Passive 3G Category R8 (42.2Mbps Downlink, 5.76Mbps Uplink) 3G bands 3 (1800MHz) / 1 (2100MHz) / 5 (850MHz) / 8 (900MHz) LTE Category 12 (600Mbps Downlink, 150Mbps Uplink) MIMO DL 4x4 MIMO UL 1x1 LTE FDD bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) 8 (900 MHz) / 20 (800MHz) / 28 (700MHz) / 32 (1500 MHz) LTE TDD bands 40 (2300MHz) / 41 (2500MHz) / 38 (2600MHz) TAC 86056104 Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 2 Wireless 2.4 GHz chip model IPQ-4019 Wireless 2.4 GHz generation Wi-Fi 4 Wireless 5 GHz Max data rate 867 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 4 Wireless 5 GHz chip model IPQ-4019 Wireless 5 GHz generation Wi-Fi 5 10/100/1000 Ethernet ports 5 Number of SIM slots 1 Modem (Micro SIM) Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 Number of M.2 slots 1 https://www.aerial.net/shop/product/176_216/2407/mikrotik-mikrotik-acgpsa-gps-antenna.html MikroTik ACGPSA - GPS antenna with SMA connector MikroTik > LTE/5G products 5.71 ACGPSA 0708747435320 8 https://www.aerial.net/shop/imageslarge/MT-ACGPSA_main.jpg ACGPSA - Active GPS antenna for LtAP mini LTE Kit ACGPSA is standalone active GPS antenna, that works in 1575.4 MHz spectrum. Antenna size is 46.5 mm x 26.5 mm x 12.5 mm with IP67 rating and includes internal magnet and double sided tape, so it can easily be attached to various surfaces. It has a long 5m cable with an SMA connector, to be connected to LtAP mini via the ACSMAUFL pigtail (available for ordering separately). Product code ACGPSA https://www.aerial.net/shop/product/176_216/2922/mikrotik-mikrotik-s53ug5haxd2haxdtceg18ea-chateau-lte18.html MikroTik S53UG+5HaxD2HaxD-TC&EG18-EA, Chateau LTE18 ax kit MikroTik > LTE/5G products 214.02 S53UG+5HaxD2HaxD-TC&EG18-EA 4752224007889 2 https://www.aerial.net/shop/imageslarge/chateaulte18_ax_main.jpg Chateau LTE18 ax - Wi-Fi 6 Home AP with LTE Support, Quad-Core 1.8GHz CPU, 802.11ax + Wave2, 4x GbE ports, 1x 2.5GbE Port Chateau LTE18 ax is a Dual Band 2.4/5GHz Wi-Fi 6 router for home or small businesses with (4) Gigabit LAN + (1) 2.5-Gigabit ports , LTE18 modem, one USB port, L4 license and extra fast 4-core ARM 1800MHz CPU, 128MB internal storage and 1 GB RAM. The modulation speed of the 2.4GHz radio part (2×2 MIMO) is 574 Mbps and for 5GHz (2×2 MIMO) it is 1200 Mbps. Chateau LTE18 ax has four built-in antennas for LTE, two SMA female connectors for possible improvement of the LTE range using external antennas and two antennas for Wi-Fi, which are included in the package. In the case of the Chateau LTE18 ax model, you no longer need to be limited by cables - the advantage of this model is huge wide channel support in 3G/LTE networks. This LTE router provides speed up to 1200 Mbps (download) and 150 Mbps upload with low latencies in LTE. https://www.aerial.net/shop/imageslarge/chateaulte18_ax_front.jpg https://www.aerial.net/shop/imageslarge/chateaulte18_ax_frear.jpg https://www.aerial.net/shop/imageslarge/chateaulte18_ax_contents.jpg Product code S53UG+5HaxD2HaxD-TC&EG18-EA Architecture ARM 64bit CPU IPQ-6010 CPU core count 4 CPU nominal frequency auto (864 -1800) MHz RouterOS license 4 Operating System RouterOS (v7 only) Size of RAM 1 GB Storage size 128 MB Storage type NAND MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -40°C to 65°C IPsec hardware acceleration Yes Number of DC inputs 1 (DC jack) DC jack input Voltage 12-28 V Max power consumption 19 W Max power consumption without attachments 16 W Cooling type Passive 3G Category R8 (42.2Mbps Downlink, 11.2Mbps Uplink) 3G bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz) LTE Category 18 (1.2Gbps Downlink, 150Mbps Uplink) MIMO DL 4x4 MIMO UL 1x1 LTE FDD bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) 8 (900 MHz) / 20 (800MHz) / 28 (700MHz) LTE TDD bands 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz) Wireless 2.4 GHz Max data rate 574 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n/ax Antenna gain dBi for 2.4 GHz 3 Wireless 2.4 GHz chip model QCN-5022 Wireless 2.4 GHz generation Wi-Fi 6 Wireless 5 GHz Max data rate 1200 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac/ax Antenna gain dBi for 5 GHz 6 Wireless 5 GHz chip model QCN-5052 Wireless 5 GHz generation Wi-Fi 6 10/100/1000 Ethernet ports 4 Number of 2.5G Ethernet ports 1 Number of SIM slots 1 Modem (Micro SIM) Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 PCB temperature monitor Yes Voltage Monitor Yes Mode button Yes Certification CE, EAC, ROHS IP 20 https://www.aerial.net/shop/product/176_216/3101/mikrotik-mikrotik-l41g2axdfg621ea-hap-ax.html MikroTik L41G-2axD&FG621-EA, hAP ax lite LTE6 MikroTik > LTE/5G products 74.90 L41G-2axD&FG621-EA 4752224008824 5 https://www.aerial.net/shop/imageslarge/L41G-2axD&FG621-EA_main.jpg hAP ax lite LTE6 The most affordable MikroTik LTE home access point. AP ax lite LTE6 is the perfect small solution, with low cost of acquisition and high performance requirement enriched with LTE modem category 6 with speed up to 300 Mbps . The device is equipped with a dual-core IPQ-5010 CPU clocked at 800 MHz, 256 MB RAM, 128 MB storage, 4x Gigabit LAN and the latest dual channel WiFi 6 with support for 802.11b/g/n/ax standards only in the 2.4 GHz spectrum. The Gen6 AX wireless chip lets you squeeze traditional 2.4GHz wireless spectrum like a lemon! Depending on your overall setup, you can expect a speed increase of up to 90%! https://www.aerial.net/shop/imageslarge/L41G-2axD&FG621-EA_ports.jpg https://www.aerial.net/shop/imageslarge/L41G-2axD&FG621-EA_front.jpg https://www.aerial.net/shop/imageslarge/hap_ax_lite_contents.jpg Product code L41G-2axD&FG621-EA Architecture ARM CPU IPQ-5010 CPU core count 2 CPU nominal frequency 800 MHz Switch chip model MT7531BE RouterOS license 4 Operating System RouterOS v7 Size of RAM 256 MB Storage size 128 MB Storage type NAND MTBF Approximately 100'000 hours at 25C Tested ambient temperature -40°C to 60°C Wireless 2.4 GHz Max data rate 574 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n/ax Antenna gain dBi for 2.4 GHz 4.3 Wireless 2.4 GHz chip model IPQ-5010 Wireless 2.4 GHz generation Wi-Fi 6 WiFi speed AX600 3G Category R8 (42.2Mbps Downlink, 11.2Mbps Uplink) 3G bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz) LTE Category 6 (300Mbit/s Downlink, 50Mbit/s Uplink) LTE FDD bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) 8 (900 MHz) / 20 (800MHz) / 28 (700MHz) LTE TDD bands 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz) TAC 86335904 10/100/1000 Ethernet ports 4 Number of SIM slots 1 Modem (Micro SIM) Number of DC inputs 1 (USB-C) Supported Voltage 5 V Max power consumption 12 W Max power consumption without attachments 12 W Cooling type Passive Certification CE, EAC, ROHS IP 20 https://www.aerial.net/shop/product/176_216/3321/mikrotik-mikrotik-capgi5haxd2haxdeg12ea-cap-lte12.html MikroTik cAPGi-5HaxD2HaxD&EG12-EA, cAP LTE12 ax MikroTik > LTE/5G products 171.22 cAPGi-5HaxD2HaxD&EG12-EA 4752224009432 2 https://www.aerial.net/shop/imageslarge/cap_lte12_ax_1.jpg cAP LTE12 ax - A powerful ceiling access point that offers true Wi-Fi 6 mobility for your outdoor business, now with a CAT12 LTE modem! With Wi-Fi 6, you can utilize the full potential of the speedy CAT12 600 Mbps LTE modem. Up to 40% higher speed in the 5 GHz spectrum and up to 90% higher speed in the 2.4 GHz spectrum compared to previous generations. Additionally, Wi-Fi 6 offers significantly improved energy efficiency and security with OWE/WPA3-PSK/WPA3-EAP encryption and management frame protection. These features help prevent attacks like brute-forcing and deauthentication. The cAP ax makes your office network installation and maintenance easier with PoE-in and PoE-out. You can use cAP ax to power other devices, such as network switches, CCTV cameras, or even another cAP ax! https://www.aerial.net/shop/imageslarge/cap_lte12_ax_2.jpg https://www.aerial.net/shop/imageslarge/cap_lte12_ax_3.jpg https://www.aerial.net/shop/imageslarge/cap_lte12_ax_4.jpg Product code cAPGi-5HaxD2HaxD&EG12-EA Architecture ARM 64bit CPU IPQ-6010 CPU core count 4 CPU nominal frequency auto (864 - 1800) MHz Switch chip model IPQ-6010 RouterOS license 4 Operating System RouterOS v7 Size of RAM 1 GB Storage size 128 MB Storage type NAND MTBF - Approximately 200.000 hours at 25°C Tested ambient temperature -40°C to 50°C IPsec hardware acceleration Yes Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 18-57 V Max power consumption 34 W Max power consumption without attachments 13 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 18-57 V PoE-out ports Ether2 PoE out Passive PoE up to 57V Max out per port output (input 18-30 V) 0.6 A Max out per port output (input 30-57 V) 0.4 A Max total out (A) 0.6 A Total output current 0.6 Total output power 22.8 3G Category R8 (42.2Mbps Downlink, 11.2Mbps Uplink) 3G bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz) LTE Category 12 (600Mbps Downlink, 150Mbps Uplink) MIMO DL 4x4 MIMO UL 1x1 LTE FDD bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) 8 (900 MHz) / 20 (800MHz) / 28 (700MHz) LTE TDD bands 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz) TAC 86056104 Wireless 2.4 GHz Max data rate 574 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n/ax Antenna gain dBi for 2.4 GHz 6 Wireless 2.4 GHz chip model QCN-5022 Wireless 2.4 GHz generation Wi-Fi 6 Wireless 5 GHz Max data rate 1200 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac/ax Antenna gain dBi for 5 GHz 5.5 Wireless 5 GHz chip model QCN-5022 Wireless 5 GHz generation Wi-Fi 6 10/100/1000 Ethernet ports 2 Number of 1G Ethernet ports with PoE-out 1 Number of SIM slots 1 Modem (Micro SIM) CPU temperature monitor Yes Mode button Yes Certification CE, EAC, ROHS IP 20 https://www.aerial.net/shop/product/176_216/2426/mikrotik-mikrotik-drpltm-dinrail-pro.html MikroTik DRP-LTM, DINrail PRO DIN rail mounting bracket for LtAP mini series MikroTik > LTE/5G products 5.71 DRP-LTM 0708747436877 1 https://www.aerial.net/shop/imageslarge/MT-dinrail_pro_main.jpg DINrail PRO - DIN rail mounting bracket for LtAP mini series DINrail PRO is a mounting bracket for LtAP mini series products, designed to fit standard 35 mm × 7.5 mm DIN rails. This bracket will allow to install LtAP mini next to the industrial control equipment like water meters etc., as well as in equipment racks. Mounting bracket is made from metal and comes with a metal ring. https://www.aerial.net/shop/imageslarge/MT-dinrail_pro_front.jpg https://www.aerial.net/shop/imageslarge/MT-dinrail_pro_top.jpg https://www.aerial.net/shop/imageslarge/MT-dinrail_pro_contents.jpg Product code DRP-LTM https://www.aerial.net/shop/product/176_216/3104/mikrotik-mikrotik-s53ug5haxd2haxdtcfg621ea-chateau-lte6.html MikroTik S53UG+5HaxD2HaxD-TC&FG621-EA, Chateau LTE6 ax MikroTik > LTE/5G products 148.74 S53UG+5HaxD2HaxD-TC&FG621-EA 4752224007896 1 https://www.aerial.net/shop/imageslarge/chateau_lte6_ax_3d.jpg Chateau LTE6 ax - A supercharged Chateau LTE6 access point with even faster wireless and an improved CPU. For mobile network users who need that extra speed and responsiveness of Gen6 ax wireless. Perfect for large, busy households or medium-sized offices. Reach consistent speeds of up to 300 Mbps with carrier aggregation, as CAT6 allows devices to use multiple bands simultaneously. That is a huge advantage in areas with many LTE users. Chateau LTE6 provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside. Depending on the service provider, we have seen Internet speed doubling in rural areas after switching to carrier aggregation, so there is no need to wait for cable network expansions. https://www.aerial.net/shop/imageslarge/chateau_lte6_ax_main.jpg https://www.aerial.net/shop/imageslarge/chateau_lte6_ax_rear.jpg https://www.aerial.net/shop/imageslarge/chateau_lte6_ax_contents.jpg Product code S53UG+5HaxD2HaxD-TC&FG621-EA Architecture ARM 64bit CPU IPQ-6010 CPU core count 4 CPU nominal frequency auto MHz Switch chip model IPQ-6010 RouterOS license 4 Operating System RouterOS v7 Size of RAM 1 GB Storage size 128 MB Storage type NAND MTBF Approximately 200'000 hours at 25C Tested ambient temperature -40°C to 70°C IPsec hardware acceleration Yes Wireless 2.4 GHz Max data rate 574 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n/ax Antenna gain dBi for 2.4 GHz 2 Wireless 2.4 GHz chip model QCN-5022 Wireless 2.4 GHz generation Wi-Fi 6 Wireless 5 GHz Max data rate 1200 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac/ax Antenna gain dBi for 5 GHz 4 Wireless 5 GHz chip model QCN-5052 Wireless 5 GHz generation Wi-Fi 6 WiFi speed AX1800 3G Category R8 (42.2Mbps Downlink, 11.2Mbps Uplink) 3G bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz) LTE Category 6 (300Mbit/s Downlink, 50Mbit/s Uplink) MIMO DL 2x2 MIMO UL 1x1 LTE FDD bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) 8 (900 MHz) / 20 (800MHz) / 28 (700MHz) LTE TDD bands 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz) TAC 86335904 10/100/1000 Ethernet ports 4 Number of 2.5G Ethernet ports 1 Number of SIM slots 1 Modem (Micro SIM) Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 Number of DC inputs 1 (DC jack) DC jack input Voltage 12-28 V Max power consumption 17 W Max power consumption without attachments 13 W Cooling type Passive https://www.aerial.net/shop/product/176_216/2425/mikrotik-mikrotik-mtaolte5dsq-mant-lte.html MikroTik MTAO-LTE-5D-SQ, mANT LTE 5o 5dBi LTE antenna with 2 x SMA connectors MikroTik > LTE/5G products 14.27 MTAO-LTE-5D-SQ 4752224002389 5 https://www.aerial.net/shop/imageslarge/MT-mant_lte_5o_main.jpg mANT LTE 5o - 5dBi LTE antenna with 2 x SMA connectors The mANT LTE 5o is an omnidirectional antenna specifically designed for LTE frequencies. It is an excellent companion to our LTE devices, such as the wAP LTE and LtAP series. The antenna has a 5 dBi gain, improving your connection in the areas with inadequate LTE service coverage, allowing you to increase your connection speed. https://www.aerial.net/shop/imageslarge/MT-mant_lte_5o_rear.jpg Product code MTAO-LTE-5D-SQ Tested ambient temperature -40°C .. +70°C tested https://www.aerial.net/shop/product/176_216/3387/mikrotik-mikrotik-rb912r2ndltmec200aeu-ltap-mini.html MikroTik RB912R-2nD-LTm&EC200A-EU, LtAP mini LTE kit (2024) MikroTik > LTE/5G products 74.90 RB912R-2nD-LTm&EC200A-EU 4752224009296 1 https://www.aerial.net/shop/imageslarge/ltap_mini_lte_kit_2024_1.jpg RB912R-2nD-LTm&EC200A-EU - LtAP mini LTE kit (2024) Tiny, affordable weatherproof access point with a built-in LTE modem and GPS. Add extensive networking and tracking options to your vehicle without breaking the bank! This is a 2024 refresh with added B28 band support. LtAP mini has a special extra-durable enclosure with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support. There’s an Ethernet port for your wired devices and a classic 2.4 GHz wireless radio. The RS232 serial port gives you console access for debugging. Powering options: DC jack or 802.3af/at PoE-in or a microUSB. https://www.aerial.net/shop/imageslarge/ltap_mini_lte_kit_2024_2.jpg https://www.aerial.net/shop/imageslarge/ltap_mini_lte_kit_2024_3.jpg https://www.aerial.net/shop/imageslarge/ltap_mini_lte_kit_2024_4.jpg Product code RB912R-2nD-LTm&EC200A-EU Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz RouterOS license 4 Operating System RouterOS v7 Size of RAM 64 MB Storage size 16 MB Storage type FLASH MTBF (Approximately) 100.000 hours at 25°C Tested ambient temperature -40°C to 70°C MicroUSB input Voltage 5 V Number of DC inputs 3 (DC jack, PoE-IN, MicroUSB) DC jack input Voltage 8-30 V Max power consumption 8 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 12-57 V 2G Category Class12 2G bands 8 (900MHz) / 3 (1800MHz) 3G Category R7 (21Mbps Downlinks, 5.76Mbps Uplink) 3G bands 5 (850MHz) / 8 (900MHz) / 1 (2100MHz) LTE Category 4 (150Mbps Downlink, 50Mbps Uplink) MIMO DL 2x2 MIMO UL 1x1 LTE FDD bands 20 (800MHz) / 8 (900 MHz) / 3 (1800MHz) / 1 (2100MHz) 7 (2600MHz) / 5 (850MHz) / 28 (700MHz) LTE TDD bands 40 (2300MHz) / 38 (2600MHz) / 41n (2500MHz) TAC 86314105 Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 1.5 Wireless 2.4 GHz chip model QCA9531 Wireless 2.4 GHz generation Wi-Fi 4 10/100 Ethernet ports 1 Number of SIM slots 2 Modem (Mini SIM) MiniPCI-e slots 1 Serial console port RS232 https://www.aerial.net/shop/product/176_216/3071/mikrotik-mikrotik-cme222nbg77-cme-iot.html MikroTik CME22-2n-BG77, CME IoT Gateway MikroTik > LTE/5G products 67.42 CME22-2n-BG77 4752224008695 1 https://www.aerial.net/shop/imageslarge/CME22-2n-BG77_main.jpg CME22-2n-BG77 - CME IoT Gateway For extremely efficient, low-cost, low-bandwidth mobile internet connectivity. The narrowband won’t be able to stream YouTube videos, but it offers better network coverage and transmits data via the most affordable data plans. With the IP66 water resistance rating, the sturdy unit can survive a variety of harsh environments and setups. It has PoE-in, PoE-out, and a 2-pin DC terminal for handy powering. We added a simple single-chain 2.4 GHz wireless - so you can use the MikroTik smartphone app to configure everything. The board supports GPS, so if you know your way around RouterOS scripting, you can try collecting weekly, daily or even hourly location data as well https://www.aerial.net/shop/imageslarge/CME22-2n-BG77_slide.jpg https://www.aerial.net/shop/imageslarge/CME22-2n-BG77_ports.jpg https://www.aerial.net/shop/imageslarge/CME22-2n-BG77_cable.jpg https://www.aerial.net/shop/imageslarge/CME22-2n-BG77_contents.jpg Product code CME22-2n-BG77 Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Switch chip model QCA9531 RouterOS license 4 Operating System RouterOS v7 Size of RAM 64 MB Storage size 16 MB Storage type FLASH MTBF ~ Approximately 100.000 hours at 25°C Tested ambient temperature -40°C to 70°C Number of DC inputs 2 (2-pin terminal, PoE-IN) 2-pin terminal input Voltage 12-57 V Max power consumption 31 W Max power consumption without attachments 6 W PoE in 802.3af/at PoE in input Voltage 18-57 V PoE-out ports Ether2 PoE out 802.3af/at Max out per port output (input 18-30 V) 600 mA Max out per port output (input 30-57 V) 450 mA Max total out (A) 0.6 A Wireless 2.4 GHz Max data rate 150 Mbit/s Wireless 2.4 GHz number of chains 1 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 2 Wireless 2.4 GHz chip model QCA9531 Wireless 2.4 GHz generation Wi-Fi 4 10/100 Ethernet ports 2 Number of SIM slots 1 Modem (Nano SIM) Certification CE, FCC, IC, EAC, ROHS IP 66 https://www.aerial.net/shop/product/176_216/3170/mikrotik-mikrotik-wapr2ndec200aeu-wap-lte.html MikroTik wAPR-2nD&EC200A-EU, wAP LTE kit (2024) MikroTik > LTE/5G products 74.90 wAPR-2nD&EC200A-EU 4752224009258 3 https://www.aerial.net/shop/imageslarge/wap_lte_kit_2024_1.jpg wAP LTE kit (2024) - wAP LTE kit with a new LTE modem. wAP LTE kit is a tiny weatherproof wireless access point for installation outside your house, in the garden, on your porch, or in any other challenging environment where you need a capable wireless connection on the tightest budget possible. It features an Ethernet port with passive PoE-in, but there are more ways to power this affordable access point: there’s also a standard DC jack and an automotive plug. The new revision features a new LTE modem that offers improved connectivity and the addition of the popular B28 band. wAP LTE kit is weatherproof and can be fixed to any external wall from the inside of the case – for extra security and less visible attachments. The bottom part can also be secured with a special anti-vandal screw, which can only be opened by the owner. There is an opening in the back of the case, allowing you to run the Ethernet cable directly behind the unit and through the wall. This way the wAP attracts less attention and blends into any environment. https://www.aerial.net/shop/imageslarge/wap_lte_kit_2024_2.jpg https://www.aerial.net/shop/imageslarge/wap_lte_kit_2024_3.jpg https://www.aerial.net/shop/imageslarge/wap_lte_kit_2024_4.jpg Product code wAPR-2nD&EC200A-EU Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz RouterOS license 4 Operating System RouterOS v7 Size of RAM 64 MB Storage size 16 MB Storage type FLASH MTBF Approximately 100.000 hours at 25°C Tested ambient temperature -40°C to +60°C Number of DC inputs 3 (PoE-IN, DC jack, Automotive) DC jack input Voltage 9-30 V Automotive input Voltage 9-30 V Max power consumption 7 W Cooling type Passive PoE in Passive PoE PoE in input Voltage 9-30 V 2G Category Class12 2G bands 8 (900MHz) / 3 (1800MHz) 3G Category R7 (21Mbps Downlinks, 5.76Mbps Uplink) 3G bands 5 (850MHz) / 8 (900MHz) / 1 (2100MHz) LTE Category 4 (150Mbps Downlink, 50Mbps Uplink) LTE FDD bands 20 (800MHz) / 3 (1800MHz) / 1 (2100MHz) 7 (2600MHz) / 8 (900 MHz) / 5 (850MHz) / 28 (700MHz) LTE TDD bands 40 (2300MHz) / 38 (2600MHz) / 41 (2500MHz) TAC 86314105 Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 2 Wireless 2.4 GHz chip model QCA9531 Wireless 2.4 GHz generation Wi-Fi 4 10/100 Ethernet ports 1 Number of SIM slots 1 Modem (Mini SIM) MiniPCI-e slots 1 PCB temperature monitor Yes Voltage Monitor Yes Certification CE, E-MARK, EAC, ROHS IP 54 https://www.aerial.net/shop/product/176_216/2920/mikrotik-mikrotik-lhggmeg18ea-lhg-lte18.html MikroTik LHGGM&EG18-EA, LHG LTE18 kit MikroTik > LTE/5G products 208.67 LHGGM&EG18-EA 4752224007414 0 https://www.aerial.net/shop/imageslarge/lhg_lte18_main.jpg LHG LTE18 kit - Ultra fast LTE Category 18 modem. Speeds up to one Gbps for the most remote areas. Τhis is a last mile-internet solution for situations when even your phone might not have any signal. The new LHG comes with a cutting-edge Category 18 LTE modem – for the fastest mobile internet no matter where you are. This kit supports speeds up to one Gbps! Due to its large high-gain 17 dBi antenna, LHG LTE18 kit can connect to cell towers in extreme rural locations where nothing else is available. There is a massive heat sink, so you don’t have to worry about overheating. The grid antenna design can withstand harsh, windy weather. And it can be mounted in different ways, including poles and masts. The LHG LTE18 kit features a 1.2 Gbps CAT18 LTE modem, which enables carrier aggregation and allows the device to use multiple bands at the same time. That is a huge advantage when there are a lot of LTE users in the area. It provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside. If you’re competing for traffic in a place with poor connectivity, the new LHG will give you the upper hand. We have seen internet speed doubling in rural areas after switching to carrier aggregation, so there is no need to wait for cable network expansions There’s a mighty high-gain antenna inside that supports a variety of LTE bands. It goes as high as 2.7 GHz. And it offers extensive low frequency coverage as well. Keep in mind that the device only supports 2x2 DL MIMO as the LHG has only 2 antenna ports. https://www.aerial.net/shop/imageslarge/lhg_lte18_front.jpg https://www.aerial.net/shop/imageslarge/lhg_lte18_port.jpg https://www.aerial.net/shop/imageslarge/lhg_lte18_mount.jpg https://www.aerial.net/shop/imageslarge/lhg_lte18_contents.jpg Product code LHGGM&EG18-EA Architecture ARM 64bit CPU 88F3720 CPU core count 2 CPU nominal frequency 800 MHz RouterOS license 3 Operating System RouterOS (v7 only) Size of RAM 256 MB Storage size 16 MB Storage type FLASH MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -40°C to 70°C Number of DC inputs 1 (PoE-IN) Max power consumption 8 W Max power consumption without attachments 8 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 12-57 V 3G Category R8 (42.2Mbps Downlink, 11.2Mbps Uplink) 3G bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz) LTE Category 18 (1.2Gbps Downlink, 150Mbps Uplink) MIMO DL 2x2 LTE FDD bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) 8 (900 MHz) / 20 (800MHz) / 28 (700MHz) LTE TDD bands 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz) 10/100/1000 Ethernet ports 1 Number of SIM slots 1 Modem (Micro SIM) Number of M.2 slots 1 Mode button Yes Certification CE, EAC, ROHS IP 54 https://www.aerial.net/shop/product/176_216/3337/mikrotik-mikrotik-rb924i2ndbt5bg77-knot-iot.html MikroTik RB924i-2nD-BT5&BG77, KNOT - IoT Gateway MikroTik > LTE/5G products 74.90 RB924i-2nD-BT5&BG77 4752224007131 0 https://www.aerial.net/shop/imageslarge/knot_1.jpg KNOT - IoT Gateway for the most versatile and cost-effective setups KNOT is a truly universal device with exceptional connectivity options and protocol support. It is an IoT Gateway that uses Narrow Band 2 and CAT-M technology. Because of the low cost, low bandwidth cellular connection, it is supported by countless mobile operators around the globe. KNOT can monitor onboard GPIOs, convert Modbus protocol to TCP, and even forward Bluetooth packets to TCP/IP network via HTTPS and MQTT. You can use the KNOT as a TCP bridge from wired Modbus sensors to send readings to a Modbus server. Yes, the KNOT brings wireless connectivity to wired sensors and actuators, such as electricity meters and relays. It could be used as a backup connection for the Ethernet or as a management channel for your network. NB/CAT-M monthly plan is much cheaper than LTE. https://www.aerial.net/shop/imageslarge/knot_2.jpg https://www.aerial.net/shop/imageslarge/knot_3.jpg https://www.aerial.net/shop/imageslarge/knot_4.jpg https://www.aerial.net/shop/imageslarge/knot_5.jpg Product code RB924i-2nD-BT5&BG77 Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Switch chip model QCA9531 Dimensions 122 x 87 x 26 mm RouterOS license 4 Operating System RouterOS Size of RAM 64 MB Storage size 128 MB Storage type NAND MTBF (Approximately) 100.000 hours at 25°C Tested ambient temperature -40°C to 70°C MicroUSB input Voltage 5 V Number of DC inputs 3 (MicroUSB, DC jack, PoE-IN) DC jack input Voltage 12-57 V Max power consumption 18 W Max power consumption without attachments 5 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 18-57 V PoE-out ports Ether2 PoE out Passive PoE up to 57V Total output power 12 Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 1.5 Wireless 2.4 GHz chip model QCA9531 Wireless 2.4 GHz generation Wi-Fi 4 10/100 Ethernet ports 2 Number of SIM slots 1 Modem (Nano SIM) Serial console port RS485 Number of USB ports 1 USB slot type microUSB type AB Max USB current (A) 1 PCB temperature monitor Yes Voltage Monitor Yes Bluetooth version 5.2 Bluetooth RF connector type uUFL https://www.aerial.net/shop/product/176_216/2402/mikrotik-mikrotik-rbwapgr5hacd2hndr11elte6-wap-ac.html MikroTik RBwAPGR-5HacD2HnD&R11e-LTE6, wAP ac LTE6 Kit, ROS L4 MikroTik > LTE/5G products 183.80 RBwAPGR-5HacD2HnD&R11e-LTE6 4752224004925 0 https://www.aerial.net/shop/imageslarge/MT-wap_ac_lte6_kit_main.jpg wAP ac LTE6 kit - Powerful and versatile dual-band wireless access point with CAT6 LTE support A small package with huge ambition – the wAP ac LTE6 kit is an upgrade of our extremely cost-effective dual-band (2.4 / 5 GHz) home access point based on the popular weatherproof wAP form factor. Its new CAT6 LTE modem enables even greater download speed – up to 300 Mbps! CAT6 also enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside. wAP ac LTE6 kit has two Gigabit Ethernet ports – you can use the device as a wired router with LTE backup via the Micro SIM slot. Alternatively, you can enjoy smooth wireless experience anywhere – indoors or outdoors. wAP ac LTE is designed to deliver strong and reliable connection in almost any situation and weather conditions. It can withstand temperatures from -30 C° to +60 C° and can be easily mounted on walls, ceilings or poles. https://www.aerial.net/shop/imageslarge/MT-wap_ac_lte6_kit_front.jpg https://www.aerial.net/shop/imageslarge/MT-wap_ac_lte6_kit_contents.jpg Product code RBwAPGR-5HacD2HnD&R11e-LTE6 Architecture ARM 32bit CPU IPQ-4018 CPU core count 4 CPU nominal frequency 716 MHz License level 4 Size of RAM 128 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -30°C to 60°C PoE in 802.3af/at PoE in input Voltage 18-57 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 10-57 V Max power consumption 16 W Max power consumption without attachments 10 W 2G Category Class12 2G bands 2 (1900MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz) 3G Category R7 (21Mbps Downlinks, 5.76Mbps Uplink) / R8 (42.2Mbps Downlink, 5.76Mbps Uplink) 3G bands 1 (2100MHz) / 2 (1900MHz) / 5 (850MHz) / 8 (900MHz) LTE Category 6 (300Mbit/s Downlink, 50Mbit/s Uplink) LTE FDD bands 1 (2100MHz) / 2 (1900MHz) / 3 (1800MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800MHz) / 5 (850MHz) / 12 (700MHz) / 17 (700MHz) / 25 (1900MHz) / 26 (850MHz) LTE TDD bands 38 (2600MHz) / 40 (2300MHz) / 39 (1900MHz) / 41n (2500MHz) AC speed AC1200 Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 2.5 Wireless 2.4 GHz chip model IPQ-4018 Wireless 2.4 GHz generation Wi-Fi 4 Wireless 5 GHz Max data rate 867 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 2.5 Wireless 5 GHz chip model IPQ-4018 Wireless 5 GHz generation Wi-Fi 5 10/100/1000 Ethernet ports 2 Number of SIM slots 1 Modem (Micro SIM) MiniPCI-e slots 1 PCB temperature monitor Yes Voltage Monitor Yes Certification CE/RED, FCC, IC, EAC, ROHS https://www.aerial.net/shop/product/176_216/2869/mikrotik-mikrotik-s53ugm5haxd2haxdtcrg502qea-chateau-5g.html MikroTik S53UG+M-5HaxD2HaxD-TC&RG502Q-EA, Chateau 5G ax MikroTik > LTE/5G products 454.79 S53UG+M-5HaxD2HaxD-TC&RG502Q-EA 4752224007872 1 https://www.aerial.net/shop/imageslarge/chateau_5g_ax_main.jpg Chateau 5G ax - Generation 6 version of Chateau 5G. Much faster wireless, improved CPU, and now – with 2.5 Gigabit Ethernet! With the Generation6 802.11ax wireless standard and Wave 2 support, Chateau 5G ax can deliver unprecedented speed. 40% higher speed in the 5 GHz and up to 90% higher speed in the 2.4 GHz spectrum! Chateau 5G ax supports MIMO 4x4 on 5G and LTE. There are 6 built-in LTE/5G antennas. One pair of external antennas provides even better wireless network coverage in the largest homes, and the other - improved LTE/5G connectivity. Four Gigabit Ethernet ports and added a 2.5 Gigabit Ethernet port on top, and a USB 3.0 which can be handy for storage purposes. The modern quad-core CPU running at 1.8 GHz combined with a solid GB of RAM packs a hefty punch when it comes to heavy operations like complex firewall rules, IPsec hardware encryption, using more threads or experimenting with advanced RouterOS features. With the addition of WPA3 advanced encryption support, you’re safer than ever before. https://www.aerial.net/shop/imageslarge/chateau_5g_ax_front.jpg https://www.aerial.net/shop/imageslarge/chateau_5g_ax_rear.jpg https://www.aerial.net/shop/imageslarge/chateau_5g_ax_contents.jpg Product code S53UG+M-5HaxD2HaxD-TC&RG502Q-EA Architecture ARM 64bit CPU IPQ-6010 CPU core count 4 CPU nominal frequency auto (864-1800) MHz RouterOS license 4 Operating System RouterOS (v7 only) Size of RAM 1 GB Storage size 128 MB Storage type NAND MTBF Approximately 200'000 hours at 25C Tested ambient temperature -40°C to 70°C Number of DC inputs 1 (DC jack) DC jack input Voltage 12-28 V Max power consumption 19 W Max power consumption without attachments 16 W Cooling type Passive 3G Category R8 (42.2Mbps Downlink, 5.76Mbps Uplink) 3G bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 6 (850 MHz) / 8 (900MHz) / 19 (800 MHz) LTE Category 20 (2.0 Gbps Downlink, 200 Mbps Uplink) MIMO DL 4x4 MIMO UL 1x1 LTE FDD bands 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) / 8 (900 MHz) / 18 (800 MHz) / 19 (800 MHz) 1 (2100MHz) / 20 (800MHz) / 26 (850MHz) / 28 (700MHz) / 32 (1500 MHz) LTE TDD bands 34 (2000 MHz) / 38 (2600MHz) / 39 (1900MHz) / 40 (2300MHz) / 41 (2500MHz) / 42 (3500MHz) / 43 (3700MHz) 5G NSA FDD bands 1 (2100 MHz) / 3 (1800 MHz) / 5 (850 MHz) / 7 (2600 MHz) / 8 (900 MHz) / 20 (800 MHz) / 28 (700 MHz) 5G NSA TDD bands 38 (2600 MHz) / 40 (2300 MHz) / 41 (2500 MHz) / 77 (3700 MHz) / 78 (3500 MHz) / 79 (4700 MHz) 5G SA FDD bands 1 (2100 MHz) / 3 (1800 MHz) / 5 (850 MHz) / 7 (2600 MHz) / 8 (900 MHz) / 20 (800 MHz) / 28 (700 MHz) 5G SA TDD bands 38 (2600 MHz) / 40 (2300 MHz) / 41 (2500 MHz) / 77 (3700 MHz) / 78 (3500 MHz) / 79 (4700 MHz) Wireless 2.4 GHz Max data rate 574 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n/ax Antenna gain dBi for 2.4 GHz 3 Wireless 2.4 GHz chip model QCN-5022 Wireless 2.4 GHz generation Wi-Fi 6 Wireless 5 GHz Max data rate 1200 Mbit/s Wireless 5 GHz number of chains 2 Wireless 5 GHz standards 802.11a/n/ac/ax Antenna gain dBi for 5 GHz 6 Wireless 5 GHz chip model QCN-5052 Wireless 5 GHz generation Wi-Fi 6 10/100/1000 Ethernet ports 4 Number of 2.5G Ethernet ports 1 Number of SIM slots 1 Modem (Micro SIM) Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 Number of M.2 slots 1 https://www.aerial.net/shop/product/176_218/3343/mikrotik-mikrotik-tgbt5in-iot-bluetooth.html MikroTik TG-BT5-IN, IoT Bluetooth indoor tag for KNOT MikroTik > IoT products 8.00 TG-BT5-IN 4752224007483 0 https://www.aerial.net/shop/imageslarge/TG-BT5-IN_1.jpg TG-BT5-IN - Indoor Bluetooth tags for the MikroTik KNOT or other IoT asset-tracking/telemetry setups. Just attach the tags to the necessary items - and the nearest gateway will sense the tags in its proximity. Exceptionally useful in warehouse logistics – let your cargo inform you as soon as it enters the warehouse! They use so little power that a single built-in 220 mAh battery will last for years. Once activated, the tag will broadcast iBeacon, Eddystone or MikroTik telemetry advertising packets to the gateway (such as the KNOT or any other BLE gateway). These packets contain MAC address used for ID, as well as telemetry data – such as acceleration, tilt and battery charge level. The gateway then pushes the data to the remote server utilizing MQTT or HTTP protocols. By default, advertisement packets are sent once every 5 seconds, but you can change this value to your liking. For example, if you set the interval to 1 second, the battery will typically last two years. The built-in accelerometers can not only detect acceleration (movement), but can also register if the device was dropped or tilted (free-fall detection). The indoor version of our BLE tags works best in a temperature range from 0°C to 70°C. It is splash-proof, and comes with a built-in accelerometer. https://www.aerial.net/shop/imageslarge/TG-BT5-IN_2.jpg Product code TG-BT5-IN Storage size 352 KB Storage type FLASH Bluetooth version 5.2 Certification CE, FCC, IC, EAC, ROHS IP 54 https://www.aerial.net/shop/product/176_218/3336/mikrotik-mikrotik-routerboard-rbwapr2ndr11elr8g-wap.html MikroTik RouterBOARD RBwAPR-2nD&R11e-LR8G, wAP LR8G kit MikroTik > IoT products 105.94 RBwAPR-2nD&R11e-LR8G 0 https://www.aerial.net/shop/imageslarge/wap_lr8g_kit_1.jpg https://www.aerial.net/shop/imageslarge/wap_lr8g_kit_2.jpg https://www.aerial.net/shop/imageslarge/wap_lr8g_kit_3.jpg https://www.aerial.net/shop/imageslarge/wap_lr8g_kit_4.jpg Product code RBwAPR-2nD&R11e-LR8G Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 600 MHz RouterOS license 4 Operating System RouterOS v7 Size of RAM 64 MB Storage size 16 MB Storage type NAND MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -40°C to 60°C Number of DC inputs 3 (DC jack, PoE-IN, Automotive) DC jack input Voltage 9-28 V Automotive input Voltage 12-30 V Max power consumption 7 W Cooling type Passive PoE in Passive PoE PoE in input Voltage 9-28 V Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 2 Wireless 2.4 GHz chip model QCA9531 Wireless 2.4 GHz generation Wi-Fi 4 10/100 Ethernet ports 1 Number of SIM slots 1 Modem (Mini SIM) MiniPCI-e slots 1 PCB temperature monitor Yes Voltage Monitor Yes GPS RF connector type uUFL https://www.aerial.net/shop/product/176_218/3339/mikrotik-mikrotik-r11elr8g-lora-minipcie.html MikroTik R11e-LR8G, LoRa miniPCI-e card, 863-870 MHz, built-in GPS. MikroTik > IoT products 44.94 R11e-LR8G 0 https://www.aerial.net/shop/imageslarge/r11e_lr8g_1 (1).jpg Product code R11e-LR8G Tested ambient temperature -40°C to 70°C Max power consumption 1.3 W GPS RF connector type uUFL Certification CE, ROHS https://www.aerial.net/shop/product/176_218/3338/mikrotik-mikrotik-ltap2hndfg621ealr8g-ltap-lr8g.html MikroTik LtAP-2HnD&FG621-EA&LR8G, LtAP LR8G LTE6 kit MikroTik > IoT products 191.54 LtAP-2HnD&FG621-EA&LR8G 0 https://www.aerial.net/shop/imageslarge/ltap_lr8g_lte6_kit_1.jpg https://www.aerial.net/shop/imageslarge/ltap_lr8g_lte6_kit_2.jpg https://www.aerial.net/shop/imageslarge/ltap_lr8g_lte6_kit_3.jpg https://www.aerial.net/shop/imageslarge/ltap_lr8g_lte6_kit_4.jpg https://www.aerial.net/shop/imageslarge/ltap_lr8g_lte6_kit_5.jpg Product code LtAP-2HnD&FG621-EA&LR8G Architecture MMIPS CPU MT7621AT CPU core count 2 CPU nominal frequency 880 MHz CPU Threads count 4 RouterOS license 4 Operating System RouterOS v7 Size of RAM 128 MB Storage size 16 MB Storage type FLASH MTBF (Approximately) 200.000 hours at 25°C Tested ambient temperature -40°C to 70°C IPsec hardware acceleration Yes Number of DC inputs 3 (Automotive, DC jack, PoE-IN) DC jack input Voltage 12-30 V Automotive input Voltage 12-27 V Max power consumption 24 W Max power consumption without attachments 12 W Cooling type Passive PoE in Passive PoE PoE in input Voltage 12-30 V 3G Category R8 (42.2Mbps Downlink, 11.2Mbps Uplink) 3G bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz) LTE Category 6 (300Mbit/s Downlink, 50Mbit/s Uplink) MIMO DL 2x2 MIMO UL 1x1 LTE FDD bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) 8 (900 MHz) / 20 (800MHz) / 28 (700MHz) LTE TDD bands 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz) TAC 86335904 Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 2.5 Wireless 2.4 GHz chip model AR9342 Wireless 2.4 GHz generation Wi-Fi 4 10/100/1000 Ethernet ports 1 Number of SIM slots 3 Modem (Mini SIM) Serial console port RS232 https://www.aerial.net/shop/product/176_218/2387/mikrotik-mikrotik-r11elr8-lora-minipcie.html MikroTik R11e-LR8, LoRa miniPCI-e card, 863-870 MHz MikroTik > IoT products 66.35 R11e-LR8 4752224002624 0 https://www.aerial.net/shop/imageslarge/MT-R11e-LR8_main.jpg R11e-LR8 - LoRa® concentrator Gateway card in mini PCIe form factor for 863-870 MHz MikroTik is bringing you new, powerful LoRa® products for the fraction of the cost you would expect. R11e-LR8 is a new LoRa® concentrator Gateway card in mini PCIe form factor based on Semtech SX1301 chipset. It enables LoRa® connectivity for any MikroTik product that has mPCIe slot with connected USB lines. With the support of 8 different channels, Listen Before Talk (LBT) and spectral scan features this product will astound you with its enticing price point. Operates in 863-870 MHz frequency https://www.aerial.net/shop/imageslarge/MT-R11e-LR8_front.jpg https://www.aerial.net/shop/imageslarge/MT-R11e-LR8_rear.jpg Part number R11e-LR8 Interface miniPCIe Supported class A and C Frequency 863-870 MHz (EU863-870, RU864-870, IN865-867) RF Output power 863-870 MHz 20 dBm Receive max sensitivity -137 dB @ SF12 Range Up to 15 km max Operating ambient temperature -40°C to +70°C https://www.aerial.net/shop/product/176_218/3340/mikrotik-mikrotik-routerboard-rbwapr2ndr11elr2-wap.html MikroTik RouterBOARD RBwAPR-2nD&R11e-LR2, wAP LR2 kit MikroTik > IoT products 111.29 RBwAPR-2nD&R11e-LR2 4752224007421 0 https://www.aerial.net/shop/imageslarge/wAP_LR2_kit_1.jpg wAP LR2 kit - Our newest out-of-the-box solution for LoRa® technology. Works with the 2.4 GHz frequency for LoRa®. Doesn’t interfere with the 2.4 GHz WLAN signal! Like the previous wAP LR kits, it contains a pre-installed UDP packet forwarder to any public or private LoRa® servers and an outdoor weatherproof wireless access point with 2.4 GHz WLAN interface and Ethernet port with PoE-in that could be used as a backend. Here’s the difference: this device works with the 2.4 GHz frequency for LoRa® as well. That means significantly higher bandwidth, higher data rate, and less air time. And because of the Chirp modulation technology, it doesn’t interfere with the 2.4 GHz WLAN signal! A perfect solution for industrial setups with a high density of sensors. There is a built-in 2 dBi WLAN / 4.7 dBi LoRa® antenna, but you can add an external antenna for extra coverage. We suggest using the TOF-2400-8V-4 Omni antenna for best results. https://www.aerial.net/shop/imageslarge/wAP_LR2_kit_2.jpg https://www.aerial.net/shop/imageslarge/wAP_LR2_kit_3.jpg https://www.aerial.net/shop/imageslarge/wAP_LR2_kit_4.jpg Product code RBwAPR-2nD&R11e-LR2 Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz RouterOS license 4 Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 60°C Number of DC inputs 3 (Automotive, DC jack, PoE-IN) DC jack input Voltage 9-30 V Automotive input Voltage 9-30 V Max power consumption 8 W Cooling type Passive PoE in Passive PoE PoE in input Voltage 9-30 V Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 2 Wireless 2.4 GHz chip model QCA9531 Wireless 2.4 GHz generation Wi-Fi 4 10/100 Ethernet ports 1 Number of SIM slots 1 Modem (Mini SIM) MiniPCI-e slots 1 https://www.aerial.net/shop/product/176_218/2834/mikrotik-mikrotik-868omniantenna-lora-omni.html MikroTik 868_Omni_antenna - LoRa Omni Antenna Kit, 6.5dBi, 824-960MHz MikroTik > IoT products 40.01 868_Omni_antenna 4752224007841 4 https://www.aerial.net/shop/imageslarge/MT-868_Omni_antenna_main.jpg 868 Omni antenna The upgrade of our antenna kit for LoRa® with a 6.5 dBi Omni antenna for 824-960 MHz, 1m long SMA cable and mechanical holder for quick and easy mast attachment. Smaller size, increased durability, and added IP66 water resistance. After reviewing your suggestions, we went back to the drawing board and redesigned the Antenna kit for LoRa®. The new kit offers significantly higher durability in a smaller package – without sacrificing performance. The improved cable durability and the added IP66 water resistance with protection against powerful jets make this kit an excellent choice for all kinds of marine and coastal projects. Mount this antenna on a 25-50 mm mast or on the wall and enjoy the superb coverage! Part number 868_Omni_antenna Frequency 824 - 960 MHz Antenna gain 6.5 dBi IP 66 https://www.aerial.net/shop/product/176_218/2791/mikrotik-mikrotik-tof24008v4-lorawlan-omni.html MikroTik TOF-2400-8V-4 - LoRa/WLAN Omni Antenna Kit 8dBi MikroTik > IoT products 37.45 TOF-2400-8V-4 708747440256 5 https://www.aerial.net/shop/imageslarge/MT-TOF-2400-8V-4_main.jpg TOF-2400-8V-4 Omni antenna - A 2.4 GHz 8 dBi Omni Antenna for the wAP LR2 kit. If necessary, this antenna can be used for any 2.4 GHz device. Working with the wAP LR2 kit or similar setups? For extra network coverage (up to 3-4km in the line of sight), we suggest adding an external 8dBi Omni antenna - the TOF-2400-8V-4. If necessary, this antenna can be used for any 2.4 GHz device. Not only it works with the 2.4 GHz LoRa® connectivity, it also supports the regular 2.4 GHz WLAN. It comes with a 1m long SMA cable and a mechanical holder for quick and easy mast attachment – when you need that extra network coverage. Compact size and increased durability without sacrificing the power – this antenna will get the job done. https://www.aerial.net/shop/imageslarge/MT-TOF-2400-8V-4_front.jpg https://www.aerial.net/shop/imageslarge/MT-TOF-2400-8V-4_connector.jpg https://www.aerial.net/shop/imageslarge/MT-TOF-2400-8V-4_contents.jpg https://www.aerial.net/shop/imageslarge/MT-TOF-2400-8V-4_install.jpg Product code TOF-2400-8V-4 Frequency 2400 - 2500 MHz Gain 8 dBi Horizontal beamwidth 360° Vertical beamwidth 18° Nominal impedance 50 Ω Lightning protection DC Ground Connector SMA Female Weight 0.6 Kgr Dimensions ø25 x 550 mm Mast diameter ø40 -ø50 mm https://www.aerial.net/shop/product/176_218/3071/mikrotik-mikrotik-cme222nbg77-cme-iot.html MikroTik CME22-2n-BG77, CME IoT Gateway MikroTik > IoT products 67.42 CME22-2n-BG77 4752224008695 1 https://www.aerial.net/shop/imageslarge/CME22-2n-BG77_main.jpg CME22-2n-BG77 - CME IoT Gateway For extremely efficient, low-cost, low-bandwidth mobile internet connectivity. The narrowband won’t be able to stream YouTube videos, but it offers better network coverage and transmits data via the most affordable data plans. With the IP66 water resistance rating, the sturdy unit can survive a variety of harsh environments and setups. It has PoE-in, PoE-out, and a 2-pin DC terminal for handy powering. We added a simple single-chain 2.4 GHz wireless - so you can use the MikroTik smartphone app to configure everything. The board supports GPS, so if you know your way around RouterOS scripting, you can try collecting weekly, daily or even hourly location data as well https://www.aerial.net/shop/imageslarge/CME22-2n-BG77_slide.jpg https://www.aerial.net/shop/imageslarge/CME22-2n-BG77_ports.jpg https://www.aerial.net/shop/imageslarge/CME22-2n-BG77_cable.jpg https://www.aerial.net/shop/imageslarge/CME22-2n-BG77_contents.jpg Product code CME22-2n-BG77 Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Switch chip model QCA9531 RouterOS license 4 Operating System RouterOS v7 Size of RAM 64 MB Storage size 16 MB Storage type FLASH MTBF ~ Approximately 100.000 hours at 25°C Tested ambient temperature -40°C to 70°C Number of DC inputs 2 (2-pin terminal, PoE-IN) 2-pin terminal input Voltage 12-57 V Max power consumption 31 W Max power consumption without attachments 6 W PoE in 802.3af/at PoE in input Voltage 18-57 V PoE-out ports Ether2 PoE out 802.3af/at Max out per port output (input 18-30 V) 600 mA Max out per port output (input 30-57 V) 450 mA Max total out (A) 0.6 A Wireless 2.4 GHz Max data rate 150 Mbit/s Wireless 2.4 GHz number of chains 1 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 2 Wireless 2.4 GHz chip model QCA9531 Wireless 2.4 GHz generation Wi-Fi 4 10/100 Ethernet ports 2 Number of SIM slots 1 Modem (Nano SIM) Certification CE, FCC, IC, EAC, ROHS IP 66 https://www.aerial.net/shop/product/176_218/3337/mikrotik-mikrotik-rb924i2ndbt5bg77-knot-iot.html MikroTik RB924i-2nD-BT5&BG77, KNOT - IoT Gateway MikroTik > IoT products 74.90 RB924i-2nD-BT5&BG77 4752224007131 0 https://www.aerial.net/shop/imageslarge/knot_1.jpg KNOT - IoT Gateway for the most versatile and cost-effective setups KNOT is a truly universal device with exceptional connectivity options and protocol support. It is an IoT Gateway that uses Narrow Band 2 and CAT-M technology. Because of the low cost, low bandwidth cellular connection, it is supported by countless mobile operators around the globe. KNOT can monitor onboard GPIOs, convert Modbus protocol to TCP, and even forward Bluetooth packets to TCP/IP network via HTTPS and MQTT. You can use the KNOT as a TCP bridge from wired Modbus sensors to send readings to a Modbus server. Yes, the KNOT brings wireless connectivity to wired sensors and actuators, such as electricity meters and relays. It could be used as a backup connection for the Ethernet or as a management channel for your network. NB/CAT-M monthly plan is much cheaper than LTE. https://www.aerial.net/shop/imageslarge/knot_2.jpg https://www.aerial.net/shop/imageslarge/knot_3.jpg https://www.aerial.net/shop/imageslarge/knot_4.jpg https://www.aerial.net/shop/imageslarge/knot_5.jpg Product code RB924i-2nD-BT5&BG77 Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Switch chip model QCA9531 Dimensions 122 x 87 x 26 mm RouterOS license 4 Operating System RouterOS Size of RAM 64 MB Storage size 128 MB Storage type NAND MTBF (Approximately) 100.000 hours at 25°C Tested ambient temperature -40°C to 70°C MicroUSB input Voltage 5 V Number of DC inputs 3 (MicroUSB, DC jack, PoE-IN) DC jack input Voltage 12-57 V Max power consumption 18 W Max power consumption without attachments 5 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 18-57 V PoE-out ports Ether2 PoE out Passive PoE up to 57V Total output power 12 Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 1.5 Wireless 2.4 GHz chip model QCA9531 Wireless 2.4 GHz generation Wi-Fi 4 10/100 Ethernet ports 2 Number of SIM slots 1 Modem (Nano SIM) Serial console port RS485 Number of USB ports 1 USB slot type microUSB type AB Max USB current (A) 1 PCB temperature monitor Yes Voltage Monitor Yes Bluetooth version 5.2 Bluetooth RF connector type uUFL https://www.aerial.net/shop/product/176_218/3243/mikrotik-mikrotik-ltap2hndfg621ealr8-ltap-lr8.html MikroTik LtAP-2HnD&FG621-EA&LR8, LtAP LR8 LTE kit MikroTik > IoT products 234.23 LtAP-2HnD&FG621-EA&LR8 4752224009333 1 https://www.aerial.net/shop/imageslarge/ltap_lr8_lte6_kit_1.jpg LtAP LR8 LTE - a compact all-in-one solution with LTE, GPS and wireless support for LoRa® in a rugged heavy-duty case Inside the heavy-duty case, there is a powerful 2.4 GHz wireless access point with a Gigabit Ethernet port, built-in GPS and two internal LTE antennas. There are two miniPCIe slots – one is used for the LTE modem, the other one is populated with the concentrator gateway card for LoRa® technology. There are three powering options: DC jack, PoE-in and automotive. We have even seen users powering the LtAP with a 20 000 mAh power bank throughout the day https://www.aerial.net/shop/imageslarge/ltap_lr8_lte6_kit_2.jpg https://www.aerial.net/shop/imageslarge/ltap_lr8_lte6_kit_3.jpg https://www.aerial.net/shop/imageslarge/ltap_lr8_lte6_kit_4.jpg https://www.aerial.net/shop/imageslarge/ltap_lr8_lte6_kit_5.jpg Product code LtAP-2HnD&FG621-EA&LR8 Architecture MMIPS CPU MT7621A CPU core count 2 CPU Threads count 4 Dimensions 170 x 162 x 40 mm RouterOS license 4 Operating System RouterOS Size of RAM 128 MB Storage size 16 MB Storage type FLASH MTBF Approximately 200'000 hours at 25C Tested ambient temperature -40°C to 70°C PoE in Passive PoE PoE in input Voltage 12-30 V Number of DC inputs 3 (Automotive, PoE-IN, DC jack) DC jack input Voltage 12-30 V Automotive input Voltage 12-27 V Max power consumption 24 W Max power consumption without attachments 9 W FAN count Passive 2G Category Class12 2G bands 2 (1900MHz) / 3 (1800MHz) 5 (850MHz) / 8 (900MHz) 3G Category R7 (21Mbps Downlinks, 5.76Mbps Uplink) 3G bands 1 (2100MHz) / 2 (1900MHz) 5 (850MHz) / 8 (900MHz) LTE Category 4 (150Mbps Downlink, 50Mbps Uplink) LTE FDD bands 1 (2100MHz) / 2 (1900MHz) / 3 (1800MHz) 7 (2600MHz) / 8 (900 MHz) / 20 (800MHz) LTE TDD bands 38 (2600MHz) / 40 (2300MHz) Wireless 2.4 GHz Max data rate 300 Mbit/s Wireless 2.4 GHz number of chains 2 Wireless 2.4 GHz standards 802.11b/g/n Antenna gain dBi for 2.4 GHz 2.5 Wireless 2.4 GHz chip model AR9382 Wireless 2.4 GHz generation Wi-Fi 4 10/100/1000 Ethernet ports 1 Serial port RS232 Number of USB ports 1 USB Power Reset Yes USB slot type USB type A Max USB current (A) 1 https://www.aerial.net/shop/product/176_218/3342/mikrotik-mikrotik-tgbt5out-iot-bluetooth.html MikroTik TG-BT5-OUT, IoT Bluetooth outdoor tag for KNOT MikroTik > IoT products 13.71 TG-BT5-OUT 708747440874 2 https://www.aerial.net/shop/imageslarge/tg_bt5_out_1.jpg TG-BT5-OUT - An outdoor heavy-duty Bluetooth tag for the MikroTik KNOT or other IoT asset-tracking/telemetry setups. Built-in temperature sensors and accelerometer. Cast in industrial grade molds for maximum protection. This version of our BLE tags comes completely sealed, cast in industrial-grade molds to give it a solid IP69k ingress protection rating. In other words, this tag is dust-tight – nothing gets in, and it is fully protected against close-range high-pressure, high-temperature spray downs. Perfect for industrial telemetry systems or to track all kinds of heavy equipment and materials at a construction site. Like the indoor version, this tag also supports iBeacon, Eddystone, and MikroTik telemetry formats. There is an NFC encoded MAC address and optional encryption. Unlike the indoor version, the outdoor tag comes with a built-in temperature sensor that can be used for condition monitoring. The ±0.5°C precision can be very useful in cold supply chain logistics. TG-BT5-OUT features an improved 550 mAH battery that will last around five years (with a sending interval of 1s). It is suitable for strapping to all kinds of surfaces, and it can handle a temperature range of -20°C to 85°C. Product code TG-BT5-OUT Storage size 512 KB Storage type FLASH Bluetooth version 5.2 Certification CE, FCC, IC, EAC, ROHS IP 69K https://www.aerial.net/shop/product/176_237/2358/mikrotik-mikrotik-wap-60g-rbwapg60ad.html MikroTik wAP 60G, RBwAPG-60ad, 60GHz, L3 MikroTik > 60GHz products 86.67 RBwAPG-60ad 4752224004796 2 https://www.aerial.net/shop/imageslarge/MT-RBwAPG-60ad_main.jpg wAP 60G The wAP 60G is weatherproof integrated 60 GHz wireless unit, that can be used indoors or outdoors as Point-to-Point or CPE unit The box includes a wall mounting kit, straps for pole mounting, power supply, PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material. wAP 60G connects to 60 GHz AP for distances up to 200m https://www.aerial.net/shop/imageslarge/MT-RBwAPG-60ad_ports.jpg https://www.aerial.net/shop/imageslarge/MT-RBwAPG-60ad_views.jpg https://www.aerial.net/shop/imageslarge/MT-RBwAPG-60ad_contents.jpg Product code RBwAPG-60ad Architecture ARM 32bit CPU IPQ-4019 CPU core count 4 CPU nominal frequency 716 MHz Dimensions 185 x 85 x 30 mm License level 3 Operating System RouterOS Size of RAM 256 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C PoE in 802.3af/at PoE in input Voltage 11-57 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 11-57 V Max power consumption 5 W 10/100/1000 Ethernet ports 1 https://www.aerial.net/shop/product/176_237/2887/mikrotik-mikrotik-cubeg5ac60ay-cube-60pro.html MikroTik CubeG-5ac60ay, Cube 60Pro ac MikroTik > 60GHz products 111.29 CubeG-5ac60ay 4752224000071 2 https://www.aerial.net/shop/imageslarge/CubeG-5ac60ay_main.jpg Cube 60Pro ac - A powerful point-to-point 60 GHz 802.11ay CPE for bridging distances up to 2.4 km. The Cube 60Pro ac CPE allows you to establish ultra-fast point-to-point connections over distances as far as 1 km. With added Channel 5* support, so you can reach even higher distances if necessary. In our tests, the Cube 60Pro ac easily maintained a reliable connection over 2.4 km. Forget about downtime with the automatic 5 GHz backup failover connection The 60 GHz frequency is unaffected by the crowded wireless spectrum, it offers high speed and capacity. We have added a powerful directional antenna so that the 5 GHz range can keep up with the 60 GHz. We have upgraded the enclosure to feature a strong metal base for better mounting and cooling options. https://www.aerial.net/shop/imageslarge/CubeG-5ac60ay_rear.jpg https://www.aerial.net/shop/imageslarge/CubeG-5ac60ay_contents.jpg Product code CubeG-5ac60ay Architecture ARM 32bit CPU IPQ-4019 CPU core count 4 CPU nominal frequency auto (448 - 896) MHz Dimensions 115 x 95 x 82 mm RouterOS license 4 Operating System RouterOS Size of RAM 256 MB Storage size 64 MB Storage type FLASH MTBF (Approximately) 200.000 hours @ 25°C Number of DC inputs 1 (PoE-IN) Max power consumption 10 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 18-48 V Wireless 5 GHz Max data rate 433 Mbit/s Wireless 5 GHz number of chains 1 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 11.5 Wireless 5 GHz chip model IPQ4019 Wireless 5 GHz generation Wi-Fi 5 10/100/1000 Ethernet ports 1 GNSS standards GPS Certification CE, FCC, IC, EAC, ROHS IP IP54 https://www.aerial.net/shop/product/176_237/2297/mikrotik-mikrotik-rblhgg60ad-lhg-60g.html MikroTik RBLHGG-60ad, LHG 60G, L3 MikroTik > 60GHz products 115.24 RBLHGG-60ad 4752224004055 2 https://www.aerial.net/shop/imageslarge/MT-RBLHG-60ad_main.jpg LHG 60G - For use as 60GHz CPE in Point -to-Multipoint setups for connections up to 800m with a 60GHz Base Stations, with Gigabit Ethernet port for speeds up to 1Gbps No need to share the frequency with your neighbors and lose valuable time – LHG 60G offers a simple and effective 60 GHz solution for wireless connection where the 2 GHz and 5GHz wireless space is crowded and unreliable. Connect up to eight of these units to a 60 GHz access point, such as our wAP60G AP or wAP 60Gx3 AP, and enjoy the smooth connection with data rate up to 2 Gbps. The effective point-to-point distance between two LHG 60G units is up to 1500 meters, point-to-multipoint – up to 800 meters. The grid design ensures protection against wind, it can withstand temperatures from -40 C‎° to +70 C‎°. The antenna element is built into the wireless unit – no loss on cables. LHG 60G is shipped with an Aim tool for easy precision alignment and strong metal LHG mount. Product code RBLHGG-60ad Architecture ARM 32bit CPU IPQ-4019 CPU core count 4 CPU nominal frequency 716 MHz License level 3 Operating System RouterOS Size of RAM 256 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C PoE in 802.3af/at PoE in input Voltage 12-57 V Number of DC inputs 1 (PoE-IN) Max power consumption 7 W 10/100/1000 Ethernet ports 1 https://www.aerial.net/shop/product/176_237/2204/mikrotik-mikrotik-rbwapg60ada-wap-60g.html MikroTik RBwAPG-60ad-A, wAP 60G AP MikroTik > 60GHz products 105.94 RBwAPG-60ad-A 4752224004802 1 https://www.aerial.net/shop/imageslarge/MT-RBwAPG-60ad-A_main.jpg wAP 60G AP - 60 GHz Base Station with Phase array 60° beamforming Integrated antenna, 716 Mhz CPU, 256 MB RAM, PSU and PoE, RouterOS L4 The wAP 60G AP is weatherproof integrated 60 GHz wireless unit, that can be used indoors or outdoors in different scenarios - Base Station, Point-to-Point or CPE. The box includes a wall mounting kit, straps for pole mounting, power supply, PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material. wAP 60G AP supports up to eight simultaneous clients on distances of 200m https://www.aerial.net/shop/imageslarge/MT-RBwAPG-60ad-A_side.jpg https://www.aerial.net/shop/imageslarge/MT-RBwAPG-60ad-A_rear.jpg https://www.aerial.net/shop/imageslarge/MT-RBwAPG-60ad-A_front.jpg Product code RBwAPG-60ad-A Architecture ARM 32bit CPU IPQ-4019 CPU core count 4 CPU nominal frequency 716 MHz Dimensions 185 x 85 x 30 mm License level 4 Operating System RouterOS Size of RAM 256 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C PoE in 802.3af/at PoE in input Voltage 11-57 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 11-57 V Max power consumption 5 W 10/100/1000 Ethernet ports 1 https://www.aerial.net/shop/product/176_237/2532/mikrotik-mikrotik-nrayg60adpair-wireless-wire.html MikroTik nRAYG-60adpair, Wireless Wire nRAY, 60GHz, L3, complete link MikroTik > 60GHz products 224.71 nRAYG-60adpair 4752224006844 1 https://www.aerial.net/shop/imageslarge/MT-nRAYG-60adpair_main.jpg Our team has gathered and taken into account your feedback to make a worthy successor of our popular Wireless Wire Dish. Now we are proud to present the best plug-and-play 60 GHz point-to-point link solution to date – the Wireless Wire nRAY. It is a kit of two pre-paired devices that make a secure AES encrypted wireless connection. It can easily cover a distance of 1500 meters and reach fiber-like speed, and we have made some serious structural improvements. With the latest antenna technologies, this device is very compact, but even more durable than its predecessors. The new form-factor has been designed with snowy areas in mind – you won’t have to worry about huge chunks of snow getting stuck and messing with the signal. Due to its size and shape, the nRAY also attracts less unwanted attention. Using the special fine-tune adjustment screws, a perfect alignment can be achieved. The 60 GHz frequency is unaffected by the crowded wireless spectrum, so you can enjoy a smooth connection even in a busy urban environment. A powerful arm64 dual-core CPU running at 1 GHz ensures wire speed throughput in nearly all packet sizes. The included devices are preconfigured to connect automatically, simply point them at one another and power them on! We have included the power supplies, PoE injectors and a handy precision mount for easier alignment - the solidMOUNT. It is an advanced pole mount metal adapter that allows adjustment both vertically and horizontally. https://www.aerial.net/shop/imageslarge/MT-nRAYG-60adpair_rear.jpg https://www.aerial.net/shop/imageslarge/MT-nRAYG-60adpair_side.jpg https://www.aerial.net/shop/imageslarge/MT-nRAYG-60adpair_top.jpg https://www.aerial.net/shop/imageslarge/MT-nRAYG-60adpair_contents.jpg Product code nRAYG-60adpair Architecture ARM 64bit CPU 88F3720 CPU core count 2 CPU nominal frequency 1 GHz Dimensions 261 x 166 mm License level 3 Operating System RouterOS Size of RAM 256 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C PoE in 802.3af/at PoE in input Voltage 12-57 V Number of DC inputs 1 (PoE-IN) Max power consumption 6 W 10/100/1000 Ethernet ports 1 Certification CE/RED, FCC, IC, EAC, ROHS https://www.aerial.net/shop/product/176_237/2059/mikrotik-mikrotik-rbwapg60ad-wireless-wire.html MikroTik RBwAPG-60ad, Wireless Wire, 60GHz - 2 pieces MikroTik > 60GHz products 173.36 RBwAPG-60ad kit 4752224004826 1 https://www.aerial.net/shop/imageslarge/MT-RBwAPG-60ad-kit_main.jpg Wireless Wire - Up to 100 metres The Wireless Wire is a ground breaking solution which offers fiber speed and quality for a fraction of the price. This amazing kit replaces your Gigabit ethernet cable with two small devices that connect to each other over a 60 GHz wireless link. Simply point the included devices at one another and power them on, it will make a 1 Gbit full duplex link to instantly replace your cable - this is why we call it the Wireless Wire! The Wireless Wire makes secure AES encrypted 60 GHz wireless link that is not affected by the crowded WiFi spectrum, offering a stable and fast link for distances of 100 meters or more. The box includes two wAP60G devices that are already paired together, a wall mounting kit, straps for pole mounting and also a pair of table stands for using the devices indoors. https://www.aerial.net/shop/imageslarge/MT-RBwAPG-60ad-kit_ports.jpg https://www.aerial.net/shop/imageslarge/MT-RBwAPG-60ad-kit_distance.jpg https://www.aerial.net/shop/imageslarge/MT-RBwAPG-60ad-kit_retail.jpg https://www.aerial.net/shop/imageslarge/MT-RBwAPG-60ad-kit_contents.jpg Product code RBwAPG-60ad kit Architecture ARM 32bit CPU IPQ-4019-0-583MSP-TR-00-0 CPU core count 4 CPU nominal frequency 716 MHz Dimensions 185 x 85 x 30 mm License level 3 Operating System RouterOS Size of RAM 256 MB Storage size 16 MB Storage type FLASH 10/100/1000 Ethernet ports 1 Max Power consumption 5W Number of DC inputs 2 (DC jack, PoE-IN) PoE in 802.3af/at DC jack input Voltage 12-57 V PoE in input Voltage 12-57 V https://www.aerial.net/shop/product/176_237/2885/mikrotik-mikrotik-cubeg5ac60aysa-cubesa-60pro.html MikroTik CubeG-5ac60ay-SA, CubeSA 60Pro ac MikroTik > 60GHz products 148.74 CubeG-5ac60ay-SA 4752224006974 1 https://www.aerial.net/shop/imageslarge/CubeG-5ac60ay-SA_main.jpg CubeSA 60Pro ac - A powerful sector antenna to connect multiple 60 GHz devices. Quick and easy networking for all kinds of pop-up events and distances up to 800m. 60 GHz solutions offer fiber-like speed and stability. Reaching distances around 600 meters in point-to-multipoint mode Depending on your setup, the distance can be even greater. For example, with devices like MikroTik nRAY, you can reach up to 800 meters. Βoth Cube 60Pro devices feature an automatic 5 GHz failover. We have added a powerful directional antenna so that the 5 GHz range can keep up with the 60 GHz. With upgraded enclosure to feature a strong metal base for better mounting and cooling options. https://www.aerial.net/shop/imageslarge/CubeG-5ac60ay-SA_rear.jpg https://www.aerial.net/shop/imageslarge/CubeG-5ac60ay-SA_contents.jpg Product code CubeG-5ac60ay-SA Architecture ARM 32bit CPU IPQ-4019 CPU core count 4 CPU nominal frequency 716 MHz Dimensions 115 x 211 x 90 mm RouterOS license 4 Operating System RouterOS Size of RAM 256 MB Storage size 64 MB Storage type FLASH MTBF Aprx 200'000 hours @25°C Tested ambient temperature -40°C to 70°C Number of DC inputs 1 (PoE-IN) Max power consumption 13 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 18-48 V Wireless 5 GHz Max data rate 433 Mbit/s Wireless 5 GHz number of chains 1 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 11.5 Wireless 5 GHz chip model IPQ4019 Wireless 5 GHz generation Wi-Fi 5 10/100/1000 Ethernet ports 1 GNSS standards GPS Certification CE, FCC, IC, EAC, ROHS IP IP54 https://www.aerial.net/shop/product/176_237/2118/mikrotik-mikrotik-lhgg60ad-wireless-wire.html MikroTik LHGG-60ad, Wireless Wire Dish, 60GHz, Pair (2 pieces) MikroTik > 60GHz products 224.71 RBLHGG-60adkit 4752224004031 1 https://www.aerial.net/shop/imageslarge/MT-RBLHGG-60adkit_main.jpg Wireless Wire Dish - 2 Gb/s aggregate link up to 1500m without cables ! The Wireless Wire Dish is a ground breaking solution which offers Fiber speed and quality on distances up to 1500 m for a fraction of the price! This amazing kit makes a secure AES encrypted 60 GHz wireless link that is not affected by the crowded WiFi spectrum, offering a stable and fast link for distances of 1500 meters or more. Simply point the included devices at one another and power them on, they are already preconfigured to connect automatically and will make a 2 Gb/s aggregate link. The box includes two LHGG-60ad devices that are already paired together, power supplies, PoE injectors and mounting kits for both devices. https://www.aerial.net/shop/imageslarge/MT-RBLHGG-60ad kit_front.jpg https://www.aerial.net/shop/imageslarge/MT-RBLHGG-60ad kit_rear.jpg https://www.aerial.net/shop/imageslarge/MT-RBLHGG-60ad kit_contents.jpg Product code RBLHGG-60ad kit Architecture ARM 32bit CPU IPQ-4019 CPU core count 4 CPU nominal frequency 716.8 MHz Dimensions Ø 391 x 222 mm License level 3 Operating System RouterOS Size of RAM 256 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C .. +70°C Max Power consumption 5W PoE in 802.3af/at PoE in input Voltage 12-57 V Number of DC inputs 1 (PoE-IN) 10/100/1000 Ethernet ports 1 https://www.aerial.net/shop/product/176_237/2886/mikrotik-mikrotik-cubeg5ac60aypair-wireless-wire.html MikroTik CubeG-5ac60aypair, Wireless Wire Cube Pro MikroTik > 60GHz products 222.58 CubeG-5ac60aypair 4752224006967 2 https://www.aerial.net/shop/imageslarge/CubeG-5ac60aypair_main.jpg Wireless Wire Cube Pro - A preconfigured kit of two Cube 60Pro ac (802.11ay 60 GHz) devices Just point the Cubes at one another and power them on! They will form a blazing fast encrypted wireless connection. Pure plug-and-play! This is a preconfigured kit of 2 x Cube 60Pro ac devices. The Cube 60Pro ac CPE allows you to establish ultra-fast point-to-point connections over distances as far as 1 km. We have added Channel 5* support, so you can reach even higher distances if necessary. In our tests, the Cube 60Pro ac easily maintained a reliable connection over 2.4 km. Bridging two locations has never been easier! We have added a powerful directional antenna so that the 5 GHz range can keep up with the 60 GHz. With upgradeded enclosure to feature a strong metal base for better mounting and cooling options. https://www.aerial.net/shop/imageslarge/CubeG-5ac60aypair_pair.jpg https://www.aerial.net/shop/imageslarge/CubeG-5ac60aypair_rear.jpg https://www.aerial.net/shop/imageslarge/CubeG-5ac60aypair_contents.jpg Product code CubeG-5ac60aypair Architecture ARM 32bit CPU IPQ-4019 CPU core count 4 CPU nominal frequency auto (448 - 896) MHz RouterOS license 4 Operating System RouterOS Size of RAM 256 MB Storage size 64 MB Storage type FLASH MTBF (Approximately) 200.000 hours @25°C Number of DC inputs 1 (PoE-IN) Frequency (Hz) 47-63 Max power consumption 10 W Cooling type Passive PoE in 802.3af/at PoE in input Voltage 18-48 V Wireless 5 GHz Max data rate 433 Mbit/s Wireless 5 GHz number of chains 1 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 11.5 Wireless 5 GHz chip model IPQ-4019 Wireless 5 GHz generation Wi-Fi 5 10/100/1000 Ethernet ports 1 GNSS standards GPS Certification CE, FCC, IC, EAC, ROHS https://www.aerial.net/shop/product/176_237/2651/mikrotik-mikrotik-cubeg5ac60adpair-wireless-wire.html MikroTik CubeG-5ac60adpair, Wireless Wire Cube, 60GHz, complete link MikroTik > 60GHz products 216.86 CubeG-5ac60adpair 4752224006875 1 https://www.aerial.net/shop/imageslarge/MT-CubeG-5ac60adpair_main.jpg Wireless Wire Cube - A 2 Gb/s 60 GHz aggregate link with a 5 GHz failover. Forget about wires or downtime! If you are managing networks in a large, busy area (like a park or a stadium), then you have probably experienced all kinds of problems – massive interference, signal loss during bad weather, etc. And laying wires everywhere can be clumsy and expensive, sometimes even impossible. Finally, there is a simple, secure and extremely cost-effective solution: the Wireless Wire Cube. It is a kit of two pre-paired devices that form a blazing fast AES encrypted wireless connection. Pure plug-and-play: just point the Cubes at one another and power them on! The 60 GHz frequency is unaffected by the crowded wireless spectrum, it offers high speed and capacity. Traditional 60 GHz devices, however, can have limited connectivity during bad weather. But not the Wireless Wire Cube! It features an automatic 5 GHz backup connection, so you don’t have to worry about any downtime. No need for additional configuration - the 5 GHz backup connection works out-of-the-box! The Cube will take care of your connection at all times. It can easily cover a distance of 800 meters and reach fiber-like speed. The Сube form-factor has been designed with function and durability in mind. And it attracts less unwanted attention due to its size and shape. The box includes two Cube 60G ac devices that are already paired together, power supplies, PoE injectors and mounting kits for both devices. https://www.aerial.net/shop/imageslarge/MT-CubeG-5ac60adpair_p2p.jpg https://www.aerial.net/shop/imageslarge/MT-CubeG-5ac60adpair_mount.jpg https://www.aerial.net/shop/imageslarge/MT-CubeG-5ac60adpair_rear.jpg https://www.aerial.net/shop/imageslarge/MT-CubeG-5ac60adpair_contents.jpg Product code CubeG-5ac60adpair Architecture ARM 32bit CPU IPQ-4019 CPU core count 4 CPU nominal frequency 716 MHz Dimensions Ø 130 x 130 x 132 mm License level 3 Operating System RouterOS Size of RAM 256 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C .. +70°C Max Power consumption 9W PoE in 802.3af/at PoE in input Voltage 12-57 V Number of DC inputs 1 (PoE-IN) Wireless 5 GHz Max data rate 433 Mbit/s Wireless 5 GHz number of chains 1 Wireless 5 GHz standards 802.11a/n/ac Antenna gain dBi for 5 GHz 11.5 Wireless 5 GHz chip model IPQ-4019 Wireless 5 GHz generation Wi-Fi 5 10/100/1000 Ethernet ports 1